Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20201112131545.62628-1-f.suligoi@asem.it>
In-Reply-To: <20201112131545.62628-1-f.suligoi@asem.it>
From:   "Rafael J. Wysocki" <rafael@kernel.org>
Date:   Mon, 16 Nov 2020 19:37:53 +0100
Message-ID: <CAJZ5v0gZxWJdNjRVqznhcNqO-Ofc6dGGES4CKhuk3w-jBhdaKw@mail.gmail.com>
Subject: Re: [PATCH v4] Documentation: ACPI: explain how to use gpio-line-names
To:     Flavio Suligoi <f.suligoi@asem.it>
Cc:     Mika Westerberg <mika.westerberg@linux.intel.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        "Rafael J . Wysocki" <rjw@rjwysocki.net>,
        Len Brown <lenb@kernel.org>, linux-gpio@vger.kernel.org,
        ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Thu, Nov 12, 2020 at 2:15 PM Flavio Suligoi <f.suligoi@asem.it> wrote:
>
> The "gpio-line-names" declaration is not fully
> documented, so can be useful to add some important
> information and one more example.
>
> This commit also fixes a trivial spelling mistake.

The spelling mistake has been fixed already, so I dropped this part of
the patch and applied the rest as 5.11 material.

Thanks!

> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> ---
>
> v2: - fix commit spelling mistakes
>     - add double back quotes to gpio-line-names
>     - adjust documentation lines layout
>     - add comma at the end of Package list names in the first example
>
> v3: - add: Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>
> v4: - add: Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
>
>  .../firmware-guide/acpi/gpio-properties.rst   | 58 ++++++++++++++++++-
>  1 file changed, 56 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/firmware-guide/acpi/gpio-properties.rst b/Documentation/firmware-guide/acpi/gpio-properties.rst
> index bb6d74f23ee0..ae5396a1f092 100644
> --- a/Documentation/firmware-guide/acpi/gpio-properties.rst
> +++ b/Documentation/firmware-guide/acpi/gpio-properties.rst
> @@ -107,7 +107,61 @@ Example::
>
>  - gpio-line-names
>
> -Example::
> +The ``gpio-line-names`` declaration is a list of strings ("names"), which
> +describes each line/pin of a GPIO controller/expander. This list, contained in
> +a package, must be inserted inside the GPIO controller declaration of an ACPI
> +table (typically inside the DSDT). The ``gpio-line-names`` list must respect the
> +following rules (see also the examples):
> +
> +  - the first name in the list corresponds with the first line/pin of the GPIO
> +    controller/expander
> +  - the names inside the list must be consecutive (no "holes" are permitted)
> +  - the list can be incomplete and can end before the last GPIO line: in
> +    other words, it is not mandatory to fill all the GPIO lines
> +  - empty names are allowed (two quotation marks ``""`` correspond to an empty
> +    name)
> +
> +Example of a GPIO controller of 16 lines, with an incomplete list with two
> +empty names::
> +
> +  Package () {
> +      "gpio-line-names",
> +      Package () {
> +          "pin_0",
> +          "pin_1",
> +          "",
> +          "",
> +          "pin_3",
> +          "pin_4_push_button",
> +      }
> +  }
> +
> +At runtime, the above declaration produces the following result (using the
> +"libgpiod" tools)::
> +
> +  root@debian:~# gpioinfo gpiochip4
> +  gpiochip4 - 16 lines:
> +          line   0:      "pin_0"       unused   input  active-high
> +          line   1:      "pin_1"       unused   input  active-high
> +          line   2:      unnamed       unused   input  active-high
> +          line   3:      unnamed       unused   input  active-high
> +          line   4:      "pin_3"       unused   input  active-high
> +          line   5: "pin_4_push_button" unused input active-high
> +          line   6:      unnamed       unused   input  active-high
> +          line   7       unnamed       unused   input  active-high
> +          line   8:      unnamed       unused   input  active-high
> +          line   9:      unnamed       unused   input  active-high
> +          line  10:      unnamed       unused   input  active-high
> +          line  11:      unnamed       unused   input  active-high
> +          line  12:      unnamed       unused   input  active-high
> +          line  13:      unnamed       unused   input  active-high
> +          line  14:      unnamed       unused   input  active-high
> +          line  15:      unnamed       unused   input  active-high
> +  root@debian:~# gpiofind pin_4_push_button
> +  gpiochip4 5
> +  root@debian:~#
> +
> +Another example::
>
>    Package () {
>        "gpio-line-names",
> @@ -191,7 +245,7 @@ The driver might expect to get the right GPIO when it does::
>  but since there is no way to know the mapping between "reset" and
>  the GpioIo() in _CRS desc will hold ERR_PTR(-ENOENT).
>
> -The driver author can solve this by passing the mapping explictly
> +The driver author can solve this by passing the mapping explicitly
>  (the recommended way and documented in the above chapter).
>
>  The ACPI GPIO mapping tables should not contaminate drivers that are not
> --
> 2.25.1
>