Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 19 Nov 2020 07:42:25 -0600
From:   Rob Herring <robh@kernel.org>
To:     Christian Eggers <ceggers@arri.de>
Cc:     Paul Barker <pbarker@konsulko.com>,
        Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
        Helmut Grohne <helmut.grohne@intenta.de>,
        Marek Vasut <marex@denx.de>, linux-kernel@vger.kernel.org,
        Andrew Lunn <andrew@lunn.ch>, Rob Herring <robh+dt@kernel.org>,
        Jakub Kicinski <kuba@kernel.org>,
        Richard Cochran <richardcochran@gmail.com>,
        netdev@vger.kernel.org,
        Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
        Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        "David S . Miller" <davem@davemloft.net>,
        George McCollister <george.mccollister@gmail.com>,
        Woojung Huh <woojung.huh@microchip.com>,
        devicetree@vger.kernel.org,
        Tristram Ha <Tristram.Ha@microchip.com>,
        Vladimir Oltean <olteanv@gmail.com>
Subject: Re: [PATCH net-next v3 01/12] dt-bindings: net: dsa: convert ksz
 bindings document to yaml
Message-ID: <20201119134225.GA3149565@bogus>
References: <20201118203013.5077-1-ceggers@arri.de>
 <20201118203013.5077-2-ceggers@arri.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20201118203013.5077-2-ceggers@arri.de>
Precedence: bulk

On Wed, 18 Nov 2020 21:30:02 +0100, Christian Eggers wrote:
> Convert the bindings document for Microchip KSZ Series Ethernet switches
> from txt to yaml.
> 
> Signed-off-by: Christian Eggers <ceggers@arri.de>
> ---
>  .../devicetree/bindings/net/dsa/ksz.txt       | 125 --------------
>  .../bindings/net/dsa/microchip,ksz.yaml       | 152 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +-
>  3 files changed, 153 insertions(+), 126 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt
>  create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa/microchip,ksz.example.dt.yaml: switch@0: 'ethernet-ports', 'reg', 'spi-cpha', 'spi-cpol', 'spi-max-frequency' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa/microchip,ksz.example.dt.yaml: switch@1: 'ethernet-ports', 'reg', 'spi-cpha', 'spi-cpol', 'spi-max-frequency' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml


See https://patchwork.ozlabs.org/patch/1402525

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.