Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965055AbWHXPzZ (ORCPT ); Thu, 24 Aug 2006 11:55:25 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S964997AbWHXPzZ (ORCPT ); Thu, 24 Aug 2006 11:55:25 -0400 Received: from nf-out-0910.google.com ([64.233.182.185]:11624 "EHLO nf-out-0910.google.com") by vger.kernel.org with ESMTP id S965055AbWHXPzW (ORCPT ); Thu, 24 Aug 2006 11:55:22 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=a3htZHV9dVMDla7jfCnEymjxMQv6R8WS5hsoOjKHPTq0TaQ7jxXWQjdsv2LhSs4NEQSO8Ta5E1DoEE89jY63MlHHZlh53lWsMmKP22vVfyMS0e2uGgJGpVEsbq2lAxYvOkdGjKwkzbBpYOfNjtHgUfRwOt5ogtZq1B8BuS7gDYU= Message-ID: <37a5ad990608240855w45cd8dcfm21edafd6cfe0631f@mail.gmail.com> Date: Thu, 24 Aug 2006 23:55:21 +0800 From: "Zhen Zhou" To: "Andy Chittenden" Subject: Re: 2.6.17 hangs during boot on ASUS M2NPV-VM motherboard Cc: "Andrew Morton" , linux-kernel@vger.kernel.org In-Reply-To: <89E85E0168AD994693B574C80EDB9C27043F5EBA@uk-email.terastack.bluearc.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <89E85E0168AD994693B574C80EDB9C27043F5EBA@uk-email.terastack.bluearc.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 32765 Lines: 737 On 7/13/06, Andy Chittenden wrote: > > On Thu, 13 Jul 2006 08:56:01 +0100 > > "Andy Chittenden" wrote: > > > > > > On Wed, 12 Jul 2006 08:58:52 +0100 > > > > "Andy Chittenden" wrote: > > > > > > > > > I tried to install the linux-image-2.6.17-1-amd64-k8-smp > > > > debian package > > > > > on a ASUS M2NPV-VM motherboard based system and it hung > > > > during boot. The > > > > > last message on the console was: > > > > > > > > > > io scheduler cfq registered > > > > > > > > Suggest you add initcall_debug to the kernel boot command > > > > line. That'll > > > > tell us which initcall got stuck. > > > > > > I was only able to scrounge 5 minutes on this system this morning. > > > Here's the last few messages output with initcall_debug on: > > > > > > Calling initcall .... init+0x0/0xc() > > > Calling initcall .... noop_init+0x0/0xc() > > > io scheduler noop registered > > > Calling initcall .... as_init+0x0/0x4f() > > > io scheduler anticipatory registered (default) > > > Calling initcall .... deadline_init+0x0/0x4f() > > > io scheduler deadline registered > > > Calling initcall .... cfq_init+0x0/0xcc() > > > io scheduler cfq registered > > > Calling initcall .... pci_init+0x0/0x2b() > > > > > > What other info can I grab? (Although I have to fit in with that > > > system's production schedule so I may not be able to come > > back with that > > > until later on today/tomorrow). > > > > Seems one of the quirks has gone bad. The below should tell > > us which one. > > You'll need to correlate it with the machine's lspci output please. > > > > > > --- a/drivers/pci/pci.c~a > > +++ a/drivers/pci/pci.c > > @@ -925,6 +925,7 @@ static int __devinit pci_init(void) > > struct pci_dev *dev = NULL; > > > > while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, > > dev)) != NULL) { > > + printk("%s: fix up %s\n", __FUNCTION__, pci_name(dev)); > > pci_fixup_device(pci_fixup_final, dev); > > } > > return 0; > > Having applied that patch, I get: > > pci_init: fix up 0000:00:00.0 > pci_init: fix up 0000:00:00.1 > pci_init: fix up 0000:00:00.2 > pci_init: fix up 0000:00:00.3 > pci_init: fix up 0000:00:00.4 > pci_init: fix up 0000:00:00.5 > pci_init: fix up 0000:00:00.6 > pci_init: fix up 0000:00:00.7 > pci_init: fix up 0000:00:02.0 > pci_init: fix up 0000:00:03.0 > pci_init: fix up 0000:00:04.0 > pci_init: fix up 0000:00:05.0 > pci_init: fix up 0000:00:09.0 > pci_init: fix up 0000:00:0a.0 > pci_init: fix up 0000:00:0a.1 > pci_init: fix up 0000:00:0a.2 > pci_init: fix up 0000:00:0b.0 > > lspci -v gives: > > 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0 > Capabilities: [44] HyperTransport: Slave or Primary Interface > Capabilities: [e0] HyperTransport: MSI Mapping > > 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: 66MHz, fast devsel > > 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: 66MHz, fast devsel > > 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: 66MHz, fast devsel > > 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0 > > 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0 > Capabilities: [44] #00 [00fe] > Capabilities: [fc] #00 [0000] > > 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: 66MHz, fast devsel > > 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: 66MHz, fast devsel > > 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) > (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: fd800000-fd8fffff > Prefetchable memory behind bridge: > 00000000fd700000-00000000fd700000 > Capabilities: [40] #0d [0000] > Capabilities: [48] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/1 Enable+ > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > Capabilities: [100] Virtual Channel > > 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) > (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 00008000-00008fff > Memory behind bridge: fde00000-fdefffff > Prefetchable memory behind bridge: > 00000000fdd00000-00000000fdd00000 > Capabilities: [40] #0d [0000] > Capabilities: [48] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/1 Enable+ > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > Capabilities: [100] Virtual Channel > > 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) > (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000b000-0000bfff > Memory behind bridge: fdc00000-fdcfffff > Prefetchable memory behind bridge: > 00000000fd900000-00000000fd900000 > Capabilities: [40] #0d [0000] > Capabilities: [48] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/1 Enable+ > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > Capabilities: [100] Virtual Channel > > 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce > 6150] (rev a2) (prog-if 00 [VGA]) > Subsystem: ASUSTeK Computer Inc. Unknown device 81cd > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 58 > Memory at fc000000 (32-bit, non-prefetchable) [size=16M] > Memory at e0000000 (64-bit, prefetchable) [size=256M] > Memory at fb000000 (64-bit, non-prefetchable) [size=16M] > [virtual] Expansion ROM at dc000000 [disabled] [size=128K] > Capabilities: [48] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > > 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0 > Capabilities: [44] HyperTransport: Slave or Primary Interface > Capabilities: [e0] HyperTransport: MSI Mapping > > 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0 > > 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: 66MHz, fast devsel, IRQ 255 > I/O ports at 4c00 [size=64] > I/O ports at 4c40 [size=64] > Capabilities: [44] Power Management version 2 > > 00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev > a3) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: 66MHz, fast devsel > > 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) > (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 233 > Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > > 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) > (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 217 > Memory at fe02e000 (32-bit, non-prefetchable) [size=256] > Capabilities: [44] Debug port > Capabilities: [80] Power Management version 2 > > 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a > [Master SecP PriP]) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0 > I/O ports at f400 [size=16] > Capabilities: [44] Power Management version 2 > > 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller > (rev a1) (prog-if 85 [Master SecO PriO]) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 50 > I/O ports at 09f0 [size=8] > I/O ports at 0bf0 [size=4] > I/O ports at 0970 [size=8] > I/O ports at 0b70 [size=4] > I/O ports at e000 [size=16] > Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Capabilities: [b0] Message Signalled Interrupts: 64bit+ > Queue=0/2 Enable- > Capabilities: [cc] HyperTransport: MSI Mapping > > 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller > (rev a1) (prog-if 85 [Master SecO PriO]) > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 217 > I/O ports at 09e0 [size=8] > I/O ports at 0be0 [size=4] > I/O ports at 0960 [size=8] > I/O ports at 0b60 [size=4] > I/O ports at cc00 [size=16] > Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Capabilities: [b0] Message Signalled Interrupts: 64bit+ > Queue=0/2 Enable- > Capabilities: [cc] HyperTransport: MSI Mapping > > 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) > (prog-if 01 [Subtractive decode]) > Flags: bus master, 66MHz, fast devsel, latency 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=128 > I/O behind bridge: 00009000-00009fff > Memory behind bridge: fdb00000-fdbfffff > Prefetchable memory behind bridge: fda00000-fdafffff > Capabilities: [b8] #0d [0000] > Capabilities: [8c] HyperTransport: MSI Mapping > > 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio > (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 81cb > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 225 > Memory at fe024000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Capabilities: [6c] HyperTransport: MSI Mapping > > 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) > Subsystem: ASUSTeK Computer Inc. Unknown device 816a > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 225 > Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] > I/O ports at c800 [size=8] > Capabilities: [44] Power Management version 2 > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > Flags: fast devsel > Capabilities: [80] HyperTransport: Host or Secondary Interface > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > Flags: fast devsel > > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > DRAM Controller > Flags: fast devsel > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > Flags: fast devsel > Capabilities: [f0] #0f [0010] > > 04:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A > IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard > Flags: bus master, medium devsel, latency 32, IRQ 209 > Memory at fdbff000 (32-bit, non-prefetchable) [size=2K] > Memory at fdbf8000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > > So I guess there's something awry with the USB controller driver? > > -- > Andy, BlueArc Engineering > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > Why don't you think this is usb problem? I use motherboard ASUS M2NPV-MX, I use Fedora 5. I got the same problem that you had, after I upgrade kernel from 2.6.15-1.2054 to kernel-2.6.17-1.2174_FC5, it hung on boot: io scheduler cfq registered So I guess this related with new nforce chipset, but have no idea which components got trouble. here is my dmesg: Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet) Linux version 2.6.15-1.2054_FC5 (bhcompile@hs20-bc1-7.build.redhat.com) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 SMP Tue Mar 14 15:48:20 EST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003def0000 (usable) BIOS-e820: 000000003def0000 - 000000003def3000 (ACPI NVS) BIOS-e820: 000000003def3000 - 000000003df00000 (ACPI data) BIOS-e820: 000000003e000000 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7240 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003def3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003def30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003defaf40 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003defb180 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003defae80 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003def0000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003def0000 On node 0 totalpages: 248471 DMA zone: 2786 pages, LIFO batch:0 DMA32 zone: 245685 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) Checking aperture... CPU 0: aperture @ 0 size 32 MB No AGP bridge found SMP: Allowing 2 CPUs, 0 hotplug CPUs Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 2004.220 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 990216k/1014720k available (2307k kernel code, 24116k reserved, 1212k data, 196k init) Calibrating delay using timer specific routine.. 4017.51 BogoMIPS (lpj=8035039) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Node 0 -> Core 0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC failed. Using local APIC timer interrupts. result 12526393 Detected 12.526 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4017.32 BogoMIPS (lpj=8034659) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Node 0 -> Core 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 521 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=306 checking if image is initramfs... it is Freeing initrd memory: 1858k freed DMI 2.3 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at f0000000 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:05.0 PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved pnp: 00:01: ioport range 0x2000-0x207f has been reserved pnp: 00:01: ioport range 0x2080-0x20ff has been reserved PCI: Bridge: 0000:00:02.0 IO window: a000-afff MEM window: fd800000-fd8fffff PREFETCH window: fd700000-fd7fffff PCI: Bridge: 0000:00:03.0 IO window: 8000-8fff MEM window: fde00000-fdefffff PREFETCH window: fdd00000-fddfffff PCI: Bridge: 0000:00:04.0 IO window: b000-bfff MEM window: fdc00000-fdcfffff PREFETCH window: fd900000-fd9fffff PCI: Bridge: 0000:00:10.0 IO window: 9000-9fff MEM window: fdb00000-fdbfffff PREFETCH window: fda00000-fdafffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1156424473.468:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key E0DE27A645ACF9C1 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie03] PCI: Setting latency timer of device 0000:00:03.0 to 64 pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie03] PCI: Setting latency timer of device 0000:00:04.0 to 64 pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A isa bounce pool size: 16 pages RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 161 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SONY CD-RW CRX175A1, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa (1300 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc (1250 mV) powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xc, vid 0xa ACPI wakeup devices: HUB0 XVRA XVRB XVRC USB0 USB2 AZAD MMAC MMCI UAR1 PS2K ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 196k freed Write protecting the kernel read-only data: 432k input: AT Translated Set 2 keyboard as /class/input/input0 SCSI subsystem initialized libata version 1.20 loaded. sata_nv 0000:00:0e.0: version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 GSI 16 sharing vector 0xB1 and IRQ 16 ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 16 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 16 ata1: SATA link up 3.0 Gbps (SStatus 123) ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: SATA link down (SStatus 0) scsi1 : sata_nv Vendor: ATA Model: WDC WD1600JS-22M Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 GSI 17 sharing vector 0xB9 and IRQ 17 ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0f.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 17 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 17 ata3: SATA link down (SStatus 0) scsi2 : sata_nv ata4: SATA link down (SStatus 0) scsi3 : sata_nv device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 GSI 18 sharing vector 0xC1 and IRQ 18 ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:14.0 to 64 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) sd 0:0:0:0: Attached scsi generic sg0 type 0 eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 GSI 19 sharing vector 0xC9 and IRQ 19 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0b.0: irq 19, io mem 0xfe02f000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:10.1 to 64 usb 1-3: new low speed USB device using ohci_hcd and address 2 usb 1-3: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-3 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:0b.1: irq 17, io mem 0xfe02e000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb 1-3: USB disconnect, address 2 usb 1-3: new low speed USB device using ohci_hcd and address 3 Non-volatile memory driver v1.2 usb 1-3: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-3 floppy0: no floppy controllers found parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names Adding 1998840k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1998840k Zhou Zhen - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/