Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
To:     Rob Herring <robh+dt@kernel.org>,
        =?UTF-8?q?Andreas=20F=C3=A4rber?= <afaerber@suse.de>,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-actions@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 07/18] arm: dts: owl-s500: Add pinctrl & GPIO support
Date:   Fri, 20 Nov 2020 01:56:01 +0200
Message-Id: <d63b1486c93b4ccc1fca9b837b150acb67c6d402.1605823502.git.cristian.ciocaltea@gmail.com>
In-Reply-To: <cover.1605823502.git.cristian.ciocaltea@gmail.com>
References: <cover.1605823502.git.cristian.ciocaltea@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add pinctrl node for Actions Semi S500 SoC.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
---
 arch/arm/boot/dts/owl-s500.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 449e9807c4ec..b16172615db0 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/owl-s500-powergate.h>
 #include <dt-bindings/reset/actions,s500-reset.h>
@@ -208,6 +209,25 @@ sps: power-controller@b01b0100 {
 			#power-domain-cells = <1>;
 		};
 
+		pinctrl: pinctrl@b01b0000 {
+			compatible = "actions,s500-pinctrl";
+			reg = <0xb01b0000 0x40>, /* GPIO */
+			      <0xb01b0040 0x10>, /* Multiplexing Control */
+			      <0xb01b0060 0x18>, /* PAD Control */
+			      <0xb01b0080 0xc>;  /* PAD Drive Capacity */
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 132>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
+		};
+
 		dma: dma-controller@b0260000 {
 			compatible = "actions,s500-dma";
 			reg = <0xb0260000 0xd00>;
-- 
2.29.2