Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: Oe1fn3YdsYU/YWQYCm1SDQQbUf+SGt3Aj+HvL9v61x/YDfy+tP1lopTRQCb0eNNVGIHjuMjtjp
 qdRFl0jbJTUd1z3yn2KizuqPV2ykVSUrRnesGvZIfaOtWJMhuxE2j5zFxsd0GJPTa1TRiXL3iY
 hZAd4ypVPh0DPPHHoAUU3affMZb5+fIjD3MOSqBxVZyIrc4VUDUQDJvUPBNl6Edy8ZgN1sX6EI
 4aMCIfzMUTgFaLv9dk8wAoW5iwAXVDgAclIzNY0+q9J2bCZ33DXIoiQCLkbWKFWuhvlYvEIQtP
 u0U=
From:   Steen Hegelund <steen.hegelund@microchip.com>
To:     Kishon Vijay Abraham I <kishon@ti.com>,
        Vinod Koul <vkoul@kernel.org>
CC:     Steen Hegelund <steen.hegelund@microchip.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Lars Povlsen <lars.povlsen@microchip.com>,
        Bjarni Jonasson <bjarni.jonasson@microchip.com>,
        Microsemi List <microsemi@lists.bootlin.com>,
        Microchip UNG Driver List <UNGLinuxDriver@microchip.com>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v5 2/4] phy: Add ethernet serdes configuration option
Date:   Mon, 23 Nov 2020 12:42:32 +0100
Message-ID: <20201123114234.2292766-3-steen.hegelund@microchip.com>
In-Reply-To: <20201123114234.2292766-1-steen.hegelund@microchip.com>
References: <20201123114234.2292766-1-steen.hegelund@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Provide a new ethernet phy configuration structure, that
allow PHYs used for ethernet to be configured with
speed, media type and clock information.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
---
 include/linux/phy/phy-ethernet-serdes.h | 30 +++++++++++++++++++++++++
 include/linux/phy/phy.h                 |  4 ++++
 2 files changed, 34 insertions(+)
 create mode 100644 include/linux/phy/phy-ethernet-serdes.h

diff --git a/include/linux/phy/phy-ethernet-serdes.h b/include/linux/phy/phy-ethernet-serdes.h
new file mode 100644
index 000000000000..d2462fadf179
--- /dev/null
+++ b/include/linux/phy/phy-ethernet-serdes.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Microchip Sparx5 Ethernet SerDes driver
+ *
+ * Copyright (c) 2020 Microschip Inc
+ */
+#ifndef __PHY_ETHERNET_SERDES_H_
+#define __PHY_ETHERNET_SERDES_H_
+
+#include <linux/types.h>
+
+enum ethernet_media_type {
+	ETH_MEDIA_DEFAULT,
+	ETH_MEDIA_SR,
+	ETH_MEDIA_DAC,
+};
+
+/**
+ * struct phy_configure_opts_eth_serdes - Ethernet SerDes This structure is used
+ * to represent the configuration state of a Ethernet Serdes PHY.
+ * @speed: Speed of the serdes interface in Mbps
+ * @media_type: Specifies which media the serdes will be using
+ */
+struct phy_configure_opts_eth_serdes {
+	u32                        speed;
+	enum ethernet_media_type   media_type;
+};
+
+#endif
+
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e435bdb0bab3..78ecb375cede 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -18,6 +18,7 @@
 
 #include <linux/phy/phy-dp.h>
 #include <linux/phy/phy-mipi-dphy.h>
+#include <linux/phy/phy-ethernet-serdes.h>
 
 struct phy;
 
@@ -49,11 +50,14 @@ enum phy_mode {
  *
  * @mipi_dphy:	Configuration set applicable for phys supporting
  *		the MIPI_DPHY phy mode.
+ * @eth_serdes: Configuration set applicable for phys supporting
+ *		the ethernet serdes.
  * @dp:		Configuration set applicable for phys supporting
  *		the DisplayPort protocol.
  */
 union phy_configure_opts {
 	struct phy_configure_opts_mipi_dphy	mipi_dphy;
+	struct phy_configure_opts_eth_serdes	eth_serdes;
 	struct phy_configure_opts_dp		dp;
 };
 
-- 
2.29.2