Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20201116104242.19907-1-brgl@bgdev.pl> <CAMRc=Mdkr+65Nu7ddjtMHTbedpNf22w1bE97vipKSdXBYm8=fw@mail.gmail.com>
 <86bf5fda-eeb5-5cb2-901f-a887af7584f6@siemens.com>
In-Reply-To: <86bf5fda-eeb5-5cb2-901f-a887af7584f6@siemens.com>
From:   Bartosz Golaszewski <brgl@bgdev.pl>
Date:   Mon, 23 Nov 2020 13:12:39 +0100
Message-ID: <CAMRc=MeayB1-hUiNUgKoG5v+CFt-Kxx88s+b-12iZDBfMjvttw@mail.gmail.com>
Subject: Re: [PATCH v5 0/7] gpio: exar: refactor the driver
To:     Jan Kiszka <jan.kiszka@siemens.com>
Cc:     Linus Walleij <linus.walleij@linaro.org>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        David Laight <David.Laight@aculab.com>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Bartosz Golaszewski <bgolaszewski@baylibre.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Thanks!On Mon, Nov 23, 2020 at 1:03 PM Jan Kiszka
<jan.kiszka@siemens.com> wrote:
>
> On 23.11.20 12:38, Bartosz Golaszewski wrote:
> > On Mon, Nov 16, 2020 at 11:42 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> >>
> >> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >>
> >> I just wanted to convert the driver to using simpler IDA API but ended up
> >> quickly converting it to using regmap. Unfortunately I don't have the HW
> >> to test it so marking the patches that introduce functional change as RFT
> >> and Cc'ing the original author.
> >>
> >
> > Hi Jan!
> >
> > Could you give this last version a final spin before I merge it?
> >
>
> [   14.250117] exar_serial 0000:02:00.0: enabling device (0000 -> 0002)
> [   14.336622] 0000:02:00.0: ttyS2 at MMIO 0x90000000 (irq = 44, base_baud = 7812500) is a XR17V35X
> [   14.391588] 0000:02:00.0: ttyS3 at MMIO 0x90000400 (irq = 44, base_baud = 7812500) is a XR17V35X
> [   19.250510] gpio_exar: probe of gpio_exar.1.auto failed with error -22
>
> That's "new"...
>

And if you change reg_bits from 11 to 16?

Bartosz