Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
In-Reply-To: <20201124114151.GA32873@kozik-lap>
References: <CGME20201123075526epcms2p59410a8ba942f8942f53a593d9df764d0@epcms2p5>
 <20201123075526epcms2p59410a8ba942f8942f53a593d9df764d0@epcms2p5>
 <20201123080123.GA5656@kozik-lap> <CACwDmQBh77pqivk=bBv3SJ14HLucY42jZyEaKAX+n=yS3TSqFw@mail.gmail.com>
 <20201124114151.GA32873@kozik-lap>
From:   Bongsu Jeon <bongsu.jeon2@gmail.com>
Date:   Wed, 25 Nov 2020 12:08:38 +0900
Message-ID: <CACwDmQDWtfa8tXkG8W+EQxjdYJ6rkVgN9PjOVQdK8CwUXAURMg@mail.gmail.com>
Subject: Re: [PATCH net-next 1/2] dt-bindings: net: nfc: s3fwrn5: Support a
 UART interface
To:     "krzk@kernel.org" <krzk@kernel.org>
Cc:     Bongsu Jeon <bongsu.jeon@samsung.com>,
        "kuba@kernel.org" <kuba@kernel.org>,
        "linux-nfc@lists.01.org" <linux-nfc@lists.01.org>,
        "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On 11/24/20, krzk@kernel.org <krzk@kernel.org> wrote:
> On Tue, Nov 24, 2020 at 08:39:40PM +0900, Bongsu Jeon wrote:
>> On Mon, Nov 23, 2020 at 5:02 PM krzk@kernel.org <krzk@kernel.org> wrote:
>> >
>> > On Mon, Nov 23, 2020 at 04:55:26PM +0900, Bongsu Jeon wrote:
>  > >  examples:
>> > >    - |
>> > >      #include <dt-bindings/gpio/gpio.h>
>> > > @@ -71,3 +81,17 @@ examples:
>> > >              wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
>> > >          };
>> > >      };
>> > > +  # UART example on Raspberry Pi
>> > > +  - |
>> > > +    &uart0 {
>> > > +        status = "okay";
>> > > +
>> > > +        s3fwrn82_uart {
>> >
>> > Just "bluetooth" to follow Devicetree specification.
>> Sorry. I don't understand this comment.
>> Could you explain it?
>> Does it mean i need to refer to the net/broadcom-bluetooth.txt?
>
> The node name should be "bluetooth", not "s3fwrn82_uart", because of
> Devicetree naming convention - node names should represent generic class
> of a device.
>
Actually, RN82 is the nfc device.
So, is it okay to use the name as nfc instead of Bluetooth?

> Best regards,
> Krzysztof
>
>