Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Biwen Li <biwen.li@oss.nxp.com>
To:     linux@rasmusvillemoes.dk, shawnguo@kernel.org, robh+dt@kernel.org,
        mark.rutland@arm.com, leoyang.li@nxp.com, zhiqiang.hou@nxp.com,
        tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        jiafei.pan@nxp.com, xiaobo.xie@nxp.com,
        linux-arm-kernel@lists.infradead.org, Biwen Li <biwen.li@nxp.com>
Subject: [v4 11/11] dt-bindings: interrupt-controller: update bindings for supporting more SoCs
Date:   Mon, 30 Nov 2020 18:15:15 +0800
Message-Id: <20201130101515.27431-11-biwen.li@oss.nxp.com>
In-Reply-To: <20201130101515.27431-1-biwen.li@oss.nxp.com>
References: <20201130101515.27431-1-biwen.li@oss.nxp.com>
Precedence: bulk

From: Biwen Li <biwen.li@nxp.com>

Update bindings for Layerscape external irqs,
support more SoCs(LS1043A, LS1046A, LS1088A,
LS208xA, LX216xA)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- none

Change in v3:
	- remove robust information

Change in v2:
	- update reg property
	- update compatible property

 .../bindings/interrupt-controller/fsl,ls-extirq.txt       | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
index f0ad7801e8cf..4d47df1a5c91 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -1,6 +1,7 @@
 * Freescale Layerscape external IRQs
 
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
+LS1088A, LS208xA, LX216xA) support inverting
 the polarity of certain external interrupt lines.
 
 The device node must be a child of the node representing the
@@ -8,12 +9,15 @@ Supplemental Configuration Unit (SCFG).
 
 Required properties:
 - compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
+  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
 - #interrupt-cells: Must be 2. The first element is the index of the
   external interrupt line. The second element is the trigger type.
 - #address-cells: Must be 0.
 - interrupt-controller: Identifies the node as an interrupt controller
 - reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG.
+  the SCFG or the External Interrupt Control Register (IRQCR) in
+  the ISC.
 - interrupt-map: Specifies the mapping from external interrupts to GIC
   interrupts.
 - interrupt-map-mask: Must be <0xffffffff 0>.
-- 
2.17.1