Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH] hwmon: corsair-psu: update supported devices
To:     Wilken Gottwalt <wilken.gottwalt@posteo.net>,
        Jonas Malaco <jonas@protocubo.io>
Cc:     linux-kernel@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>,
        Jonathan Corbet <corbet@lwn.net>, linux-hwmon@vger.kernel.org
References: <X7+T4aZSUuzfsf7H@monster.powergraphx.local>
 <CANS_-EN8rgFEyE5rDw3=JLUYNwLQexafn7efvMC_=+4s2h1R6Q@mail.gmail.com>
 <20201128113524.24f4f56f@monster.powergraphx.local>
From:   Thomas Backlund <tmb@iki.fi>
Message-ID: <4917cc59-aa35-7fb1-d2d0-75039523816f@iki.fi>
Date:   Mon, 30 Nov 2020 14:43:44 +0200
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:78.0) Gecko/20100101
 Thunderbird/78.5.0
MIME-Version: 1.0
In-Reply-To: <20201128113524.24f4f56f@monster.powergraphx.local>
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Language: sv
Content-Transfer-Encoding: 7bit
Precedence: bulk

Den 28.11.2020 kl. 12:35, skrev Wilken Gottwalt:
> On Sat, 28 Nov 2020 02:37:38 -0300
> Jonas Malaco <jonas@protocubo.io> wrote:
> 
>> On Thu, Nov 26, 2020 at 8:43 AM Wilken Gottwalt
>> <wilken.gottwalt@posteo.net> wrote:
>>>
>>> Adds support for another Corsair PSUs series: AX760i, AX860i, AX1200i,
>>> AX1500i and AX1600i. The first 3 power supplies are supported through
>>> the Corsair Link USB Dongle which is some kind of USB/Serial/TTL
>>> converter especially made for the COM ports of these power supplies.
>>> There are 3 known revisions of these adapters. The AX1500i power supply
>>> has revision 3 built into the case and AX1600i is the only one in that
>>> series, which has an unique usb hid id like the RM/RX series.
>>
>> Can I ask what AXi power supplies were tested?
>>
>> I ask because, based on the user-space implementations I am aware of,
>> the AXi dongle protocol appears to be different from the RMi/HXi series.
> 
> I was not able to test this against the AX power supplies, they are really
> hard to find (and are far to expensive). But I went through all these tools
> and stuck to the most common commands, which all 3 series support. Not every
> series supports all commands (there also seem to be different firmwares in
> the micro-conrollers). But this is fine, some sensors will show up as N/A.
> Even my HX850i does not support all commands covered in this driver.
> 

What kind of tests do you want / need ?

I have an AX860i here.

--
Regards

Thomas Backlund