Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 30 Nov 2020 15:49:15 +0100
From:   Wilken Gottwalt <wilken.gottwalt@posteo.net>
To:     Thomas Backlund <tmb@iki.fi>
Cc:     Jonas Malaco <jonas@protocubo.io>, linux-kernel@vger.kernel.org,
        Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>,
        Jonathan Corbet <corbet@lwn.net>, linux-hwmon@vger.kernel.org
Subject: Re: [PATCH] hwmon: corsair-psu: update supported devices
Message-ID: <20201130154915.760923fd@monster.powergraphx.local>
In-Reply-To: <4917cc59-aa35-7fb1-d2d0-75039523816f@iki.fi>
References: <X7+T4aZSUuzfsf7H@monster.powergraphx.local>
        <CANS_-EN8rgFEyE5rDw3=JLUYNwLQexafn7efvMC_=+4s2h1R6Q@mail.gmail.com>
        <20201128113524.24f4f56f@monster.powergraphx.local>
        <4917cc59-aa35-7fb1-d2d0-75039523816f@iki.fi>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Mon, 30 Nov 2020 14:43:44 +0200
Thomas Backlund <tmb@iki.fi> wrote:

> Den 28.11.2020 kl. 12:35, skrev Wilken Gottwalt:
> > On Sat, 28 Nov 2020 02:37:38 -0300
> > Jonas Malaco <jonas@protocubo.io> wrote:
> > 
> >> On Thu, Nov 26, 2020 at 8:43 AM Wilken Gottwalt
> >> <wilken.gottwalt@posteo.net> wrote:
> >>>
> >>> Adds support for another Corsair PSUs series: AX760i, AX860i, AX1200i,
> >>> AX1500i and AX1600i. The first 3 power supplies are supported through
> >>> the Corsair Link USB Dongle which is some kind of USB/Serial/TTL
> >>> converter especially made for the COM ports of these power supplies.
> >>> There are 3 known revisions of these adapters. The AX1500i power supply
> >>> has revision 3 built into the case and AX1600i is the only one in that
> >>> series, which has an unique usb hid id like the RM/RX series.
> >>
> >> Can I ask what AXi power supplies were tested?
> >>
> >> I ask because, based on the user-space implementations I am aware of,
> >> the AXi dongle protocol appears to be different from the RMi/HXi series.
> > 
> > I was not able to test this against the AX power supplies, they are really
> > hard to find (and are far to expensive). But I went through all these tools
> > and stuck to the most common commands, which all 3 series support. Not every
> > series supports all commands (there also seem to be different firmwares in
> > the micro-conrollers). But this is fine, some sensors will show up as N/A.
> > Even my HX850i does not support all commands covered in this driver.
> > 
> 
> What kind of tests do you want / need ?
> 
> I have an AX860i here.

Oh nice. Lets start with an usb info dump. Can you give me the full dump of
lsusb -vd <device> of the Corsair USB dongle?

greetings,
Wilken

> --
> Regards
> 
> Thomas Backlund
>