Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Troy Lee <troy_lee@aspeedtech.com>
To:     Stefan Schaeckeler <sschaeck@cisco.com>,
        Rob Herring <robh+dt@kernel.org>,
        Joel Stanley <joel@jms.id.au>,
        Andrew Jeffery <andrew@aj.id.au>,
        "Borislav Petkov" <bp@alien8.de>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Tony Luck <tony.luck@intel.com>,
        James Morse <james.morse@arm.com>,
        Robert Richter <rrichter@marvell.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        "moderated list:ARM/ASPEED MACHINE SUPPORT" 
        <linux-arm-kernel@lists.infradead.org>,
        "moderated list:ARM/ASPEED MACHINE SUPPORT" 
        <linux-aspeed@lists.ozlabs.org>,
        open list <linux-kernel@vger.kernel.org>,
        "open list:EDAC-CORE" <linux-edac@vger.kernel.org>
CC:     <leetroy@gmail.com>, <troy_lee@aspeedtech.com>,
        <ryan_chen@aspeedtech.com>
Subject: [PATCH v2 1/3] dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support
Date:   Wed, 2 Dec 2020 14:36:09 +0800
Message-ID: <20201202063612.21241-1-troy_lee@aspeedtech.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Adding Aspeed AST2400 and AST2600 binding for edac driver.

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
---
 .../devicetree/bindings/edac/aspeed-sdram-edac.txt       | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
index 6a0f3d90d682..8ca9e0a049d8 100644
--- a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
@@ -1,6 +1,6 @@
-Aspeed AST2500 SoC EDAC node
+Aspeed BMC SoC EDAC node
 
-The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error
+The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
 correction check).
 
 The memory controller supports SECDED (single bit error correction, double bit
@@ -11,7 +11,10 @@ Note, the bootloader must configure ECC mode in the memory controller.
 
 
 Required properties:
-- compatible: should be "aspeed,ast2500-sdram-edac"
+- compatible: should be one of
+	- "aspeed,ast2400-sdram-edac"
+	- "aspeed,ast2500-sdram-edac"
+	- "aspeed,ast2600-sdram-edac"
 - reg:        sdram controller register set should be <0x1e6e0000 0x174>
 - interrupts: should be AVIC interrupt #0
 
-- 
2.17.1