Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: Michal Simek <monstr@monstr.eu>
From:   Michal Simek <michal.simek@xilinx.com>
To:     linux-kernel@vger.kernel.org, monstr@monstr.eu,
        michal.simek@xilinx.com, git@xilinx.com
Cc:     Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
        Kalyani Akula <kalyani.akula@xilinx.com>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Manish Narani <manish.narani@xilinx.com>,
        Rajan Vaja <rajan.vaja@xilinx.com>,
        Rob Herring <robh+dt@kernel.org>,
        Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/12] arm64: dts: zynqmp: DT updates to match latest drivers
Date:   Wed,  2 Dec 2020 15:05:59 +0100
Message-Id: <cover.1606917949.git.michal.simek@xilinx.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi,

I am sending this series to reflect the latest drivers which have been
merged to mainline kernel. I have boot it on zcu102-rev1.0 and also
zcu104-rev1.0. That's why I have also added DT for this newer revision.

The series is based on https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt.
And mio-bank patch requires update in dt-binding which has been posted here
https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com

Thanks,
Michal


Michal Simek (12):
  arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
  arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
  arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
  arm64: dts: zynqmp: Enable and wire reset controller
  arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
  arm64: dts: zynqmp: Add label for zynqmp_ipi
  arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
  arm64: dts: zynqmp: Wire arasan nand controller
  arm64: dts: zynqmp: Wire zynqmp qspi controller
  arm64: dts: zynqmp: Add missing lpd watchdog node
  arm64: dts: zynqmp: Add missing iommu IDs
  arm64: dts: zynqmp: Add description for zcu104 revC

 arch/arm64/boot/dts/xilinx/Makefile           |   1 +
 .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi |  12 +
 .../boot/dts/xilinx/zynqmp-zcu100-revC.dts    |   2 +
 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    |  84 +++++-
 .../boot/dts/xilinx/zynqmp-zcu104-revA.dts    |  29 ++
 .../boot/dts/xilinx/zynqmp-zcu104-revC.dts    | 282 ++++++++++++++++++
 .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    |  78 +++++
 .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    |  59 +++-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 118 +++++++-
 9 files changed, 661 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts

-- 
2.29.2