Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v2 04/17] ibmvfc: add alloc/dealloc routines for SCSI
 Sub-CRQ Channels
To:     Tyrel Datwyler <tyreld@linux.ibm.com>,
        james.bottomley@hansenpartnership.com
Cc:     martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
        linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
        brking@linux.ibm.com
References: <20201202005329.4538-1-tyreld@linux.ibm.com>
 <20201202005329.4538-5-tyreld@linux.ibm.com>
From:   Brian King <brking@linux.vnet.ibm.com>
Message-ID: <f0b848d3-0a39-dd95-e4a2-b303c12ed0dd@linux.vnet.ibm.com>
Date:   Wed, 2 Dec 2020 09:25:17 -0600
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.4.0
MIME-Version: 1.0
In-Reply-To: <20201202005329.4538-5-tyreld@linux.ibm.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 12/1/20 6:53 PM, Tyrel Datwyler wrote:
> +static int ibmvfc_register_scsi_channel(struct ibmvfc_host *vhost,
> +				  int index)
> +{
> +	struct device *dev = vhost->dev;
> +	struct vio_dev *vdev = to_vio_dev(dev);
> +	struct ibmvfc_sub_queue *scrq = &vhost->scsi_scrqs.scrqs[index];
> +	int rc = -ENOMEM;
> +
> +	ENTER;
> +
> +	scrq->msgs = (struct ibmvfc_sub_crq *)get_zeroed_page(GFP_KERNEL);
> +	if (!scrq->msgs)
> +		return rc;
> +
> +	scrq->size = PAGE_SIZE / sizeof(*scrq->msgs);
> +	scrq->msg_token = dma_map_single(dev, scrq->msgs, PAGE_SIZE,
> +					 DMA_BIDIRECTIONAL);
> +
> +	if (dma_mapping_error(dev, scrq->msg_token))
> +		goto dma_map_failed;
> +
> +	rc = h_reg_sub_crq(vdev->unit_address, scrq->msg_token, PAGE_SIZE,
> +			   &scrq->cookie, &scrq->hw_irq);
> +
> +	if (rc) {
> +		dev_warn(dev, "Error registering sub-crq: %d\n", rc);
> +		dev_warn(dev, "Firmware may not support MQ\n");

Will this now get logged everywhere this new driver runs if the firmware
does not support sub CRQs? Is there something better that could be done
here to only log this for a true error and not just because a new driver
is running with an older firmware release?

> +		goto reg_failed;
> +	}
> +
> +	scrq->hwq_id = index;
> +	scrq->vhost = vhost;
> +
> +	LEAVE;
> +	return 0;
> +
> +reg_failed:
> +	dma_unmap_single(dev, scrq->msg_token, PAGE_SIZE, DMA_BIDIRECTIONAL);
> +dma_map_failed:
> +	free_page((unsigned long)scrq->msgs);
> +	LEAVE;
> +	return rc;
> +}
> +


-- 
Brian King
Power Linux I/O
IBM Linux Technology Center