Received: by 2002:a05:6a10:f347:0:0:0:0 with SMTP id d7csp1006072pxu; Wed, 2 Dec 2020 08:44:41 -0800 (PST) X-Google-Smtp-Source: ABdhPJzBDSQiiivylWIwb6WQKMHM9tCRl0nYV4Yc4KVJ389/35pOV+K53yd9vnt7AlfZgKtKWHqQ X-Received: by 2002:a17:906:4e50:: with SMTP id g16mr618303ejw.191.1606927481595; Wed, 02 Dec 2020 08:44:41 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1606927481; cv=none; d=google.com; s=arc-20160816; b=Fu7ndihxKDpGwtIkaaoQNF2B1mgZOWyQondGm5jJhmWzxf1yrVgk2okllaXk1zhRdf cCjzbNHLFHYumUAvswgOdYMUYwNC9nkCNUgrSm2n13WYjtTTKP4w0nz4R8NosUmLPcWN CDXCOEGhGIedHfd85Mm+xE4DSr+2nPXj7RdAiEDG7i0XL2lIr8XeIrS2ngwZdaSjOt+9 iawYMw1QwYssG6nfhd83hlmlLjrhGQCFtVXhtQQSOx29XOxaRb2r3TZ9jHSYrkNbLhyp OuNyHXzsF8Xh9XqKPcIxzKCtF7Onc9lOmkcaVIzFAGVxtGAxAh4/G4Py6ELRQkVwAGz8 8hMQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:references:in-reply-to:message-id:date:subject :cc:to:from; bh=rzwqgHTexlp+C4JNXmPicUEFwn2xQm7QG22KcLl2xvQ=; b=lCMQ4yY/ZaxwRzIEw1YSMiK7cE1d7BB9cs/H+ahqBkIbQnIVCzn1mXKmGzHHHzFBlo r6SVcGdjC7boMa19S2t7WZjL8D5eJf4Rl/3nSBOlgolJD/PXHwFriVi6zidp8GsWKcSE 2YfRoXmQffys2Q8ua9+zYL6gm9jFchxCqaJWTwYo45/tRUXpcdSwXuhSNYPa44wp1ptF gAk64NkAX+GYQwQUolvgk8fRV4vGsky9yxN3RluZGAIPi5Oz0lZjUHOMyekhvW4M4MLP Vtcb1rgf3xZaW3vc/q+RHio3vrpaWv1NLUbLgOWS8zMDF35ht+IVV93iMysGmW3YsNIR d3Cg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=arm.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id ha13si277340ejb.379.2020.12.02.08.44.16; Wed, 02 Dec 2020 08:44:41 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=arm.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2388899AbgLBN4M (ORCPT + 99 others); Wed, 2 Dec 2020 08:56:12 -0500 Received: from foss.arm.com ([217.140.110.172]:40466 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726048AbgLBN4L (ORCPT ); Wed, 2 Dec 2020 08:56:11 -0500 Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 797721396; Wed, 2 Dec 2020 05:54:47 -0800 (PST) Received: from localhost.localdomain (unknown [172.31.20.19]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 5DD103F718; Wed, 2 Dec 2020 05:54:45 -0800 (PST) From: Andre Przywara To: Maxime Ripard , Chen-Yu Tsai , Jernej Skrabec Cc: Icenowy Zheng , linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, Linus Walleij , Rob Herring , Yangtao Li , linux-kernel@vger.kernel.org, Michael Turquette , Stephen Boyd , Philipp Zabel , linux-clk@vger.kernel.org, Andre Przywara Subject: [PATCH 5/8] clk: sunxi-ng: Add support for the Allwinner H616 CCU Date: Wed, 2 Dec 2020 13:54:06 +0000 Message-Id: <20201202135409.13683-6-andre.przywara@arm.com> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20201202135409.13683-1-andre.przywara@arm.com> References: <20201202135409.13683-1-andre.przywara@arm.com> Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org While the clocks are fairly similar to the H6, many differ in tiny details, so a separate clock driver seems indicated. Derived from the H6 clock driver, and adjusted according to the manual. Signed-off-by: Andre Przywara --- drivers/clk/sunxi-ng/Kconfig | 7 +- drivers/clk/sunxi-ng/Makefile | 1 + drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 1134 +++++++++++++++++++ drivers/clk/sunxi-ng/ccu-sun50i-h616.h | 58 + include/dt-bindings/clock/sun50i-h616-ccu.h | 110 ++ include/dt-bindings/reset/sun50i-h616-ccu.h | 67 ++ 6 files changed, 1376 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.h create mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index ce5f5847d5d3..cd46d8853876 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -32,8 +32,13 @@ config SUN50I_H6_CCU default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST +config SUN50I_H616_CCU + bool "Support for the Allwinner H616 CCU" + default ARM64 && ARCH_SUNXI + depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST + config SUN50I_H6_R_CCU - bool "Support for the Allwinner H6 PRCM CCU" + bool "Support for the Allwinner H6 and H616 PRCM CCU" default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 3eb5cff40eac..96c324306d97 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o obj-$(CONFIG_SUN50I_A100_CCU) += ccu-sun50i-a100.o obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-sun50i-a100-r.o obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o +obj-$(CONFIG_SUN50I_H616_CCU) += ccu-sun50i-h616.o obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c new file mode 100644 index 000000000000..3fbb258f0354 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c @@ -0,0 +1,1134 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Arm Ltd. + * Based on the H6 CCU driver, which is: + * Copyright (c) 2017 Icenowy Zheng + */ + +#include +#include +#include +#include + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_mult.h" +#include "ccu_nk.h" +#include "ccu_nkm.h" +#include "ccu_nkmp.h" +#include "ccu_nm.h" + +#include "ccu-sun50i-h616.h" + +/* + * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However + * P should only be used for output frequencies lower than 288 MHz. + * + * For now we can just model it as a multiplier clock, and force P to /1. + * + * The M factor is present in the register's description, but not in the + * frequency formula, and it's documented as "M is only used for backdoor + * testing", so it's not modelled and then force to 0. + */ +#define SUN50I_H616_PLL_CPUX_REG 0x000 +static struct ccu_mult pll_cpux_clk = { + .enable = BIT(31), + .lock = BIT(28), + .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .common = { + .reg = 0x000, + .hw.init = CLK_HW_INIT("pll-cpux", "osc24M", + &ccu_mult_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */ +#define SUN50I_H616_PLL_DDR0_REG 0x010 +static struct ccu_nkmp pll_ddr0_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x010, + .hw.init = CLK_HW_INIT("pll-ddr0", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_DDR1_REG 0x018 +static struct ccu_nkmp pll_ddr1_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x018, + .hw.init = CLK_HW_INIT("pll-ddr1", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_PERIPH0_REG 0x020 +static struct ccu_nkmp pll_periph0_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .fixed_post_div = 4, + .common = { + .reg = 0x020, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-periph0", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_PERIPH1_REG 0x028 +static struct ccu_nkmp pll_periph1_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .fixed_post_div = 4, + .common = { + .reg = 0x028, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-periph1", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_GPU_REG 0x030 +static struct ccu_nkmp pll_gpu_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x030, + .hw.init = CLK_HW_INIT("pll-gpu", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* + * For Video PLLs, the output divider is described as "used for testing" + * in the user manual. So it's not modelled and forced to 0. + */ +#define SUN50I_H616_PLL_VIDEO0_REG 0x040 +static struct ccu_nm pll_video0_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .min_rate = 288000000, + .max_rate = 2400000000UL, + .common = { + .reg = 0x040, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video0", "osc24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_VIDEO1_REG 0x048 +static struct ccu_nm pll_video1_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .min_rate = 288000000, + .max_rate = 2400000000UL, + .common = { + .reg = 0x048, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video1", "osc24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_VIDEO2_REG 0x050 +static struct ccu_nm pll_video2_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .min_rate = 288000000, + .max_rate = 2400000000UL, + .common = { + .reg = 0x050, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video2", "osc24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_VE_REG 0x058 +static struct ccu_nkmp pll_ve_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x058, + .hw.init = CLK_HW_INIT("pll-ve", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_DE_REG 0x060 +static struct ccu_nkmp pll_de_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x060, + .hw.init = CLK_HW_INIT("pll-de", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* + * TODO: Determine SDM settings for the audio PLL. The manual suggests + * PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2, pattern=0xe000c49b + * for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3, OUTPUT_DIV=2, + * pattern=0xe001288c for 22.5792 MHz. + * This clashes with our fixed PLL_POST_DIV_P. + */ +#define SUN50I_H616_PLL_AUDIO_REG 0x078 +static struct ccu_nm pll_audio_hs_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .common = { + .reg = 0x078, + .hw.init = CLK_HW_INIT("pll-audio-hs", "osc24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +static const char * const cpux_parents[] = { "osc24M", "osc32k", + "iosc", "pll-cpux", "pll-periph0" }; +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents, + 0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL); +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0); +static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0); + +static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k", + "iosc", "pll-periph0" }; +static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2", + psi_ahb1_ahb2_parents, + 0x510, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + 0); + +static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k", + "psi-ahb1-ahb2", + "pll-periph0" }; +static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + 0); + +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + 0); + +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + 0); + +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", + "pll-ddr0", "pll-ddr1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540, + 0, 3, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + CLK_IS_CRITICAL); + +static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" }; +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600, + 0, 4, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2", + 0x60c, BIT(0), 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", + de_parents, + 0x620, + 0, 4, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2", + 0x62c, BIT(0), 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d", de_parents, 0x630, + 0, 4, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2", + 0x63c, BIT(0), 0); + +static const char * const gpu0_parents[] = { "pll-gpu", "gpu1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(gpu0_clk, "gpu0", gpu0_parents, 0x670, + 0, 2, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); +static SUNXI_CCU_M_WITH_GATE(gpu1_clk, "gpu1", "pll-periph0-2x", 0x674, + 0, 3, /* M */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2", + 0x67c, BIT(0), 0); + +static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 1, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2", + 0x68c, BIT(0), 0); + +static const char * const ve_parents[] = { "pll-ve" }; +static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690, + 0, 3, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2", + 0x69c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2", + 0x70c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2", + 0x73c, BIT(0), 0); + +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0); + +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2", + 0x78c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2", + 0x79c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0); + +static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" }; +static struct ccu_div dram_clk = { + .div = _SUNXI_CCU_DIV(0, 2), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0x800, + .hw.init = CLK_HW_INIT_PARENTS("dram", + dram_parents, + &ccu_div_ops, + CLK_IS_CRITICAL), + }, +}; + +static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus", + 0x804, BIT(0), 0); +static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus", + 0x804, BIT(1), 0); +static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus", + 0x804, BIT(2), 0); +static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus", + 0x804, BIT(3), 0); +static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus", + 0x804, BIT(5), 0); +static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus", + 0x804, BIT(10), 0); + +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2", + 0x80c, BIT(0), CLK_IS_CRITICAL); + +static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0", + "pll-periph1", "pll-periph0-2x", + "pll-periph1-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 3, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 3, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0); + +static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x", + "pll-periph1-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + 0); + +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0); + +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0); +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0); +static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2", 0x90c, BIT(5), 0); + +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0); +static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2", 0x91c, BIT(4), 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 3, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 3, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0); + +static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970, + BIT(31) | BIT(30), 0); + +static SUNXI_CCU_GATE(bus_emac0_clk, "bus-emac0", "ahb3", 0x97c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_emac1_clk, "bus-emac1", "ahb3", 0x97c, BIT(1), 0); + +static const char * const ts_parents[] = { "osc24M", "pll-periph0" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 1, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0); + +static const char * const audio_parents[] = { "pll-audio-1x", "pll-audio-2x", + "pll-audio-4x", "pll-audio-hs" }; +static struct ccu_div spdif_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa20, + .hw.init = CLK_HW_INIT_PARENTS("spdif", + audio_parents, + &ccu_div_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0); + +static struct ccu_div dmic_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa40, + .hw.init = CLK_HW_INIT_PARENTS("dmic", + audio_parents, + &ccu_div_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_1x_clk, "audio-codec-1x", + audio_parents, 0xa50, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x", + audio_parents, 0xa54, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c, + BIT(0), 0); + +static struct ccu_div audio_hub_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa60, + .hw.init = CLK_HW_INIT_PARENTS("audio-hub", + audio_parents, + &ccu_div_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0); + +/* + * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports. + * We will force them to 0 (12M divided from 48M). + */ +#define SUN50I_H616_USB0_CLK_REG 0xa70 +#define SUN50I_H616_USB1_CLK_REG 0xa74 +#define SUN50I_H616_USB2_CLK_REG 0xa78 +#define SUN50I_H616_USB3_CLK_REG 0xa7c + +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0); + +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0); + +static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc12M", 0xa78, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M", 0xa78, BIT(29), 0); + +static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc12M", 0xa7c, BIT(29), 0); + +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb3", 0xa8c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0); +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0); +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0); +static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb3", 0xa8c, BIT(6), 0); +static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0); +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0); + +static SUNXI_CCU_GATE(bus_keyadc_clk, "bus-keyadc", "apb1", 0xa9c, BIT(0), 0); + +static struct clk_fixed_factor pll_periph0_4x_clk; + +static const char * const hdmi_parents[] = { "pll-video0", "pll-video0-4x", + "pll-video2", "pll-video2-4x" }; +static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04, BIT(31), 0); + +static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" }; +static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = { + { .index = 1, .div = 36621 }, +}; + +#define SUN50I_H616_HDMI_CEC_CLK_REG 0xb10 +static struct ccu_mux hdmi_cec_clk = { + .enable = BIT(31), + + .mux = { + .shift = 24, + .width = 2, + + .fixed_predivs = hdmi_cec_predivs, + .n_predivs = ARRAY_SIZE(hdmi_cec_predivs), + }, + + .common = { + .reg = 0xb10, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("hdmi-cec", + hdmi_cec_parents, + &ccu_mux_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3", + 0xb5c, BIT(0), 0); + +static const char * const tcon_tv0_parents[] = { "pll-video0", + "pll-video0-4x", + "pll-video1", + "pll-video1-4x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0", + tcon_tv0_parents, 0xb80, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3", + 0xb9c, BIT(0), 0); + +static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0); + +/* Fixed factor clocks */ +static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0); + +static const struct clk_hw *clk_parent_pll_audio[] = { + &pll_audio_hs_clk.common.hw +}; + +/* + * The divider of pll-audio is fixed to 24 for now, so 24576000 and 22579200 + * rates can be set exactly in conjunction with sigma-delta modulation. + */ +static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x", + clk_parent_pll_audio, + 96, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x", + clk_parent_pll_audio, + 48, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x", + clk_parent_pll_audio, + 24, 1, CLK_SET_RATE_PARENT); + +static const struct clk_hw *pll_periph0_parents[] = { + &pll_periph0_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_periph0_4x_clk, "pll-periph0-4x", + pll_periph0_parents, + 1, 4, 0); +static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x", + pll_periph0_parents, + 1, 2, 0); + +static const struct clk_hw *pll_periph1_parents[] = { + &pll_periph1_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_periph1_4x_clk, "pll-periph1-4x", + pll_periph1_parents, + 1, 4, 0); +static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x", + pll_periph1_parents, + 1, 2, 0); + +static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x", + &pll_video0_clk.common.hw, + 1, 4, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x", + &pll_video1_clk.common.hw, + 1, 4, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HW(pll_video2_4x_clk, "pll-video2-4x", + &pll_video2_clk.common.hw, + 1, 4, CLK_SET_RATE_PARENT); + +static struct ccu_common *sun50i_h616_ccu_clks[] = { + &pll_cpux_clk.common, + &pll_ddr0_clk.common, + &pll_ddr1_clk.common, + &pll_periph0_clk.common, + &pll_periph1_clk.common, + &pll_gpu_clk.common, + &pll_video0_clk.common, + &pll_video1_clk.common, + &pll_video2_clk.common, + &pll_ve_clk.common, + &pll_de_clk.common, + &pll_audio_hs_clk.common, + &cpux_clk.common, + &axi_clk.common, + &cpux_apb_clk.common, + &psi_ahb1_ahb2_clk.common, + &ahb3_clk.common, + &apb1_clk.common, + &apb2_clk.common, + &mbus_clk.common, + &de_clk.common, + &bus_de_clk.common, + &deinterlace_clk.common, + &bus_deinterlace_clk.common, + &g2d_clk.common, + &bus_g2d_clk.common, + &gpu0_clk.common, + &bus_gpu_clk.common, + &gpu1_clk.common, + &ce_clk.common, + &bus_ce_clk.common, + &ve_clk.common, + &bus_ve_clk.common, + &bus_dma_clk.common, + &bus_hstimer_clk.common, + &avs_clk.common, + &bus_dbg_clk.common, + &bus_psi_clk.common, + &bus_pwm_clk.common, + &bus_iommu_clk.common, + &dram_clk.common, + &mbus_dma_clk.common, + &mbus_ve_clk.common, + &mbus_ce_clk.common, + &mbus_ts_clk.common, + &mbus_nand_clk.common, + &mbus_g2d_clk.common, + &bus_dram_clk.common, + &nand0_clk.common, + &nand1_clk.common, + &bus_nand_clk.common, + &mmc0_clk.common, + &mmc1_clk.common, + &mmc2_clk.common, + &bus_mmc0_clk.common, + &bus_mmc1_clk.common, + &bus_mmc2_clk.common, + &bus_uart0_clk.common, + &bus_uart1_clk.common, + &bus_uart2_clk.common, + &bus_uart3_clk.common, + &bus_uart4_clk.common, + &bus_uart5_clk.common, + &bus_i2c0_clk.common, + &bus_i2c1_clk.common, + &bus_i2c2_clk.common, + &bus_i2c3_clk.common, + &bus_i2c4_clk.common, + &spi0_clk.common, + &spi1_clk.common, + &bus_spi0_clk.common, + &bus_spi1_clk.common, + &emac_25m_clk.common, + &bus_emac0_clk.common, + &bus_emac1_clk.common, + &ts_clk.common, + &bus_ts_clk.common, + &bus_ths_clk.common, + &spdif_clk.common, + &bus_spdif_clk.common, + &dmic_clk.common, + &bus_dmic_clk.common, + &audio_codec_1x_clk.common, + &audio_codec_4x_clk.common, + &bus_audio_codec_clk.common, + &audio_hub_clk.common, + &bus_audio_hub_clk.common, + &usb_ohci0_clk.common, + &usb_phy0_clk.common, + &usb_ohci1_clk.common, + &usb_phy1_clk.common, + &usb_ohci2_clk.common, + &usb_phy2_clk.common, + &usb_ohci3_clk.common, + &usb_phy3_clk.common, + &bus_ohci0_clk.common, + &bus_ohci1_clk.common, + &bus_ohci2_clk.common, + &bus_ohci3_clk.common, + &bus_ehci0_clk.common, + &bus_ehci1_clk.common, + &bus_ehci2_clk.common, + &bus_ehci3_clk.common, + &bus_otg_clk.common, + &bus_keyadc_clk.common, + &hdmi_clk.common, + &hdmi_slow_clk.common, + &hdmi_cec_clk.common, + &bus_hdmi_clk.common, + &bus_tcon_top_clk.common, + &tcon_tv0_clk.common, + &bus_tcon_tv0_clk.common, + &hdcp_clk.common, + &bus_hdcp_clk.common, +}; + +static struct clk_hw_onecell_data sun50i_h616_hw_clks = { + .hws = { + [CLK_OSC12M] = &osc12M_clk.hw, + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw, + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw, + [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw, + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw, + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw, + [CLK_PLL_PERIPH0_4X] = &pll_periph0_4x_clk.hw, + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw, + [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw, + [CLK_PLL_PERIPH1_4X] = &pll_periph1_4x_clk.hw, + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw, + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw, + [CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw, + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw, + [CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw, + [CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw, + [CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw, + [CLK_PLL_VE] = &pll_ve_clk.common.hw, + [CLK_PLL_DE] = &pll_de_clk.common.hw, + [CLK_PLL_AUDIO_HS] = &pll_audio_hs_clk.common.hw, + [CLK_PLL_AUDIO_1X] = &pll_audio_1x_clk.hw, + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw, + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw, + [CLK_CPUX] = &cpux_clk.common.hw, + [CLK_AXI] = &axi_clk.common.hw, + [CLK_CPUX_APB] = &cpux_apb_clk.common.hw, + [CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw, + [CLK_AHB3] = &ahb3_clk.common.hw, + [CLK_APB1] = &apb1_clk.common.hw, + [CLK_APB2] = &apb2_clk.common.hw, + [CLK_MBUS] = &mbus_clk.common.hw, + [CLK_DE] = &de_clk.common.hw, + [CLK_BUS_DE] = &bus_de_clk.common.hw, + [CLK_DEINTERLACE] = &deinterlace_clk.common.hw, + [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw, + [CLK_G2D] = &g2d_clk.common.hw, + [CLK_BUS_G2D] = &bus_g2d_clk.common.hw, + [CLK_GPU0] = &gpu0_clk.common.hw, + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw, + [CLK_GPU1] = &gpu1_clk.common.hw, + [CLK_CE] = &ce_clk.common.hw, + [CLK_BUS_CE] = &bus_ce_clk.common.hw, + [CLK_VE] = &ve_clk.common.hw, + [CLK_BUS_VE] = &bus_ve_clk.common.hw, + [CLK_BUS_DMA] = &bus_dma_clk.common.hw, + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw, + [CLK_AVS] = &avs_clk.common.hw, + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw, + [CLK_BUS_PSI] = &bus_psi_clk.common.hw, + [CLK_BUS_PWM] = &bus_pwm_clk.common.hw, + [CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw, + [CLK_DRAM] = &dram_clk.common.hw, + [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw, + [CLK_MBUS_VE] = &mbus_ve_clk.common.hw, + [CLK_MBUS_CE] = &mbus_ce_clk.common.hw, + [CLK_MBUS_TS] = &mbus_ts_clk.common.hw, + [CLK_MBUS_NAND] = &mbus_nand_clk.common.hw, + [CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw, + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw, + [CLK_NAND0] = &nand0_clk.common.hw, + [CLK_NAND1] = &nand1_clk.common.hw, + [CLK_BUS_NAND] = &bus_nand_clk.common.hw, + [CLK_MMC0] = &mmc0_clk.common.hw, + [CLK_MMC1] = &mmc1_clk.common.hw, + [CLK_MMC2] = &mmc2_clk.common.hw, + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw, + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw, + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw, + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw, + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw, + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw, + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw, + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw, + [CLK_BUS_UART5] = &bus_uart5_clk.common.hw, + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw, + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw, + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw, + [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw, + [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw, + [CLK_SPI0] = &spi0_clk.common.hw, + [CLK_SPI1] = &spi1_clk.common.hw, + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw, + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw, + [CLK_EMAC_25M] = &emac_25m_clk.common.hw, + [CLK_BUS_EMAC0] = &bus_emac0_clk.common.hw, + [CLK_BUS_EMAC1] = &bus_emac1_clk.common.hw, + [CLK_TS] = &ts_clk.common.hw, + [CLK_BUS_TS] = &bus_ts_clk.common.hw, + [CLK_BUS_THS] = &bus_ths_clk.common.hw, + [CLK_SPDIF] = &spdif_clk.common.hw, + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw, + [CLK_DMIC] = &dmic_clk.common.hw, + [CLK_BUS_DMIC] = &bus_dmic_clk.common.hw, + [CLK_AUDIO_CODEC_1X] = &audio_codec_1x_clk.common.hw, + [CLK_AUDIO_CODEC_4X] = &audio_codec_4x_clk.common.hw, + [CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw, + [CLK_AUDIO_HUB] = &audio_hub_clk.common.hw, + [CLK_BUS_AUDIO_HUB] = &bus_audio_hub_clk.common.hw, + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw, + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw, + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw, + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw, + [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw, + [CLK_USB_PHY2] = &usb_phy2_clk.common.hw, + [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw, + [CLK_USB_PHY3] = &usb_phy3_clk.common.hw, + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw, + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw, + [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw, + [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw, + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw, + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw, + [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw, + [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw, + [CLK_BUS_OTG] = &bus_otg_clk.common.hw, + [CLK_BUS_KEYADC] = &bus_keyadc_clk.common.hw, + [CLK_HDMI] = &hdmi_clk.common.hw, + [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw, + [CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw, + [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw, + [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw, + [CLK_TCON_TV0] = &tcon_tv0_clk.common.hw, + [CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw, + [CLK_HDCP] = &hdcp_clk.common.hw, + [CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sun50i_h616_ccu_resets[] = { + [RST_MBUS] = { 0x540, BIT(30) }, + + [RST_BUS_DE] = { 0x60c, BIT(16) }, + [RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) }, + [RST_BUS_GPU] = { 0x67c, BIT(16) }, + [RST_BUS_CE] = { 0x68c, BIT(16) }, + [RST_BUS_VE] = { 0x69c, BIT(16) }, + [RST_BUS_DMA] = { 0x70c, BIT(16) }, + [RST_BUS_HSTIMER] = { 0x73c, BIT(16) }, + [RST_BUS_DBG] = { 0x78c, BIT(16) }, + [RST_BUS_PSI] = { 0x79c, BIT(16) }, + [RST_BUS_PWM] = { 0x7ac, BIT(16) }, + [RST_BUS_IOMMU] = { 0x7bc, BIT(16) }, + [RST_BUS_DRAM] = { 0x80c, BIT(16) }, + [RST_BUS_NAND] = { 0x82c, BIT(16) }, + [RST_BUS_MMC0] = { 0x84c, BIT(16) }, + [RST_BUS_MMC1] = { 0x84c, BIT(17) }, + [RST_BUS_MMC2] = { 0x84c, BIT(18) }, + [RST_BUS_UART0] = { 0x90c, BIT(16) }, + [RST_BUS_UART1] = { 0x90c, BIT(17) }, + [RST_BUS_UART2] = { 0x90c, BIT(18) }, + [RST_BUS_UART3] = { 0x90c, BIT(19) }, + [RST_BUS_UART4] = { 0x90c, BIT(20) }, + [RST_BUS_UART5] = { 0x90c, BIT(21) }, + [RST_BUS_I2C0] = { 0x91c, BIT(16) }, + [RST_BUS_I2C1] = { 0x91c, BIT(17) }, + [RST_BUS_I2C2] = { 0x91c, BIT(18) }, + [RST_BUS_I2C3] = { 0x91c, BIT(19) }, + [RST_BUS_I2C4] = { 0x91c, BIT(20) }, + [RST_BUS_SPI0] = { 0x96c, BIT(16) }, + [RST_BUS_SPI1] = { 0x96c, BIT(17) }, + [RST_BUS_EMAC0] = { 0x97c, BIT(16) }, + [RST_BUS_EMAC1] = { 0x97c, BIT(17) }, + [RST_BUS_TS] = { 0x9bc, BIT(16) }, + [RST_BUS_THS] = { 0x9fc, BIT(16) }, + [RST_BUS_SPDIF] = { 0xa2c, BIT(16) }, + [RST_BUS_DMIC] = { 0xa4c, BIT(16) }, + [RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) }, + [RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) }, + + [RST_USB_PHY0] = { 0xa70, BIT(30) }, + [RST_USB_PHY1] = { 0xa74, BIT(30) }, + [RST_USB_PHY2] = { 0xa78, BIT(30) }, + [RST_USB_PHY3] = { 0xa7c, BIT(30) }, + + [RST_BUS_OHCI0] = { 0xa8c, BIT(16) }, + [RST_BUS_OHCI1] = { 0xa8c, BIT(17) }, + [RST_BUS_OHCI2] = { 0xa8c, BIT(18) }, + [RST_BUS_OHCI3] = { 0xa8c, BIT(19) }, + [RST_BUS_EHCI0] = { 0xa8c, BIT(20) }, + [RST_BUS_EHCI1] = { 0xa8c, BIT(21) }, + [RST_BUS_EHCI2] = { 0xa8c, BIT(22) }, + [RST_BUS_EHCI3] = { 0xa8c, BIT(23) }, + [RST_BUS_OTG] = { 0xa8c, BIT(24) }, + [RST_BUS_KEYADC] = { 0xa9c, BIT(16) }, + + [RST_BUS_HDMI] = { 0xb1c, BIT(16) }, + [RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) }, + [RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) }, + [RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) }, + [RST_BUS_HDCP] = { 0xc4c, BIT(16) }, +}; + +static const struct sunxi_ccu_desc sun50i_h616_ccu_desc = { + .ccu_clks = sun50i_h616_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_h616_ccu_clks), + + .hw_clks = &sun50i_h616_hw_clks, + + .resets = sun50i_h616_ccu_resets, + .num_resets = ARRAY_SIZE(sun50i_h616_ccu_resets), +}; + +static const u32 pll_regs[] = { + SUN50I_H616_PLL_CPUX_REG, + SUN50I_H616_PLL_DDR0_REG, + SUN50I_H616_PLL_DDR1_REG, + SUN50I_H616_PLL_PERIPH0_REG, + SUN50I_H616_PLL_PERIPH1_REG, + SUN50I_H616_PLL_GPU_REG, + SUN50I_H616_PLL_VIDEO0_REG, + SUN50I_H616_PLL_VIDEO1_REG, + SUN50I_H616_PLL_VIDEO2_REG, + SUN50I_H616_PLL_VE_REG, + SUN50I_H616_PLL_DE_REG, + SUN50I_H616_PLL_AUDIO_REG, +}; + +static const u32 pll_video_regs[] = { + SUN50I_H616_PLL_VIDEO0_REG, + SUN50I_H616_PLL_VIDEO1_REG, + SUN50I_H616_PLL_VIDEO2_REG, +}; + +static const u32 usb2_clk_regs[] = { + SUN50I_H616_USB0_CLK_REG, + SUN50I_H616_USB1_CLK_REG, + SUN50I_H616_USB2_CLK_REG, + SUN50I_H616_USB3_CLK_REG, +}; + +static int sun50i_h616_ccu_probe(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *reg; + u32 val; + int i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + /* Enable the lock bits on all PLLs */ + for (i = 0; i < ARRAY_SIZE(pll_regs); i++) { + val = readl(reg + pll_regs[i]); + val |= BIT(29); + writel(val, reg + pll_regs[i]); + } + + /* + * Force the output divider of video PLLs to 0. + * + * See the comment before pll-video0 definition for the reason. + */ + for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) { + val = readl(reg + pll_video_regs[i]); + val &= ~BIT(0); + writel(val, reg + pll_video_regs[i]); + } + + /* + * Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz) + * + * This clock mux is still mysterious, and the code just enforces + * it to have a valid clock parent. + */ + for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) { + val = readl(reg + usb2_clk_regs[i]); + val &= ~GENMASK(25, 24); + writel (val, reg + usb2_clk_regs[i]); + } + + /* + * Force the post-divider of pll-audio to 12 and the output divider + * of it to 2, so 24576000 and 22579200 rates can be set exactly. + */ + val = readl(reg + SUN50I_H616_PLL_AUDIO_REG); + val &= ~(GENMASK(21, 16) | BIT(0)); + writel(val | (11 << 16) | BIT(0), reg + SUN50I_H616_PLL_AUDIO_REG); + + /* + * First clock parent (osc32K) is unusable for CEC. But since there + * is no good way to force parent switch (both run with same frequency), + * just set second clock parent here. + */ + val = readl(reg + SUN50I_H616_HDMI_CEC_CLK_REG); + val |= BIT(24); + writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG); + + return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_h616_ccu_desc); +} + +static const struct of_device_id sun50i_h616_ccu_ids[] = { + { .compatible = "allwinner,sun50i-h616-ccu", + .data = &sun50i_h616_ccu_desc }, + { } +}; + +static struct platform_driver sun50i_h616_ccu_driver = { + .probe = sun50i_h616_ccu_probe, + .driver = { + .name = "sun50i-h616-ccu", + .of_match_table = sun50i_h616_ccu_ids, + }, +}; +builtin_platform_driver(sun50i_h616_ccu_driver); diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.h b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h new file mode 100644 index 000000000000..da8f0b1206f9 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2020 Arm Ltd. + */ + +#ifndef _CCU_SUN50I_H616_H_ +#define _CCU_SUN50I_H616_H_ + +#include +#include + +#define CLK_OSC12M 0 +#define CLK_PLL_CPUX 1 +#define CLK_PLL_DDR0 2 +#define CLK_PLL_DDR1 3 + +/* PLL_PERIPH0 exported for PRCM */ + +#define CLK_PLL_PERIPH0_2X 5 +#define CLK_PLL_PERIPH0_4X 6 +#define CLK_PLL_PERIPH1 7 +#define CLK_PLL_PERIPH1_2X 8 +#define CLK_PLL_PERIPH1_4X 9 +#define CLK_PLL_GPU 10 +#define CLK_PLL_VIDEO0 11 +#define CLK_PLL_VIDEO0_4X 12 +#define CLK_PLL_VIDEO1 13 +#define CLK_PLL_VIDEO1_4X 14 +#define CLK_PLL_VIDEO2 15 +#define CLK_PLL_VIDEO2_4X 16 +#define CLK_PLL_VE 17 +#define CLK_PLL_DE 18 +#define CLK_PLL_AUDIO_HS 19 +#define CLK_PLL_AUDIO_1X 20 +#define CLK_PLL_AUDIO_2X 21 +#define CLK_PLL_AUDIO_4X 22 + +/* CPUX clock exported for DVFS */ + +#define CLK_AXI 24 +#define CLK_CPUX_APB 25 +#define CLK_PSI_AHB1_AHB2 26 +#define CLK_AHB3 27 + +/* APB1 clock exported for PIO */ + +#define CLK_APB2 29 +#define CLK_MBUS 30 + +/* All module clocks and bus gates are exported except DRAM */ + +#define CLK_DRAM 51 + +#define CLK_BUS_DRAM 58 + +#define CLK_NUMBER (CLK_BUS_HDCP + 1) + +#endif /* _CCU_SUN50I_H616_H_ */ diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h b/include/dt-bindings/clock/sun50i-h616-ccu.h new file mode 100644 index 000000000000..a9cc8844e3a9 --- /dev/null +++ b/include/dt-bindings/clock/sun50i-h616-ccu.h @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2020 Arm Ltd. + */ + +#ifndef _DT_BINDINGS_CLK_SUN50I_H616_H_ +#define _DT_BINDINGS_CLK_SUN50I_H616_H_ + +#define CLK_PLL_PERIPH0 4 + +#define CLK_CPUX 23 + +#define CLK_APB1 28 + +#define CLK_DE 31 +#define CLK_BUS_DE 32 +#define CLK_DEINTERLACE 33 +#define CLK_BUS_DEINTERLACE 34 +#define CLK_G2D 35 +#define CLK_BUS_G2D 36 +#define CLK_GPU0 37 +#define CLK_BUS_GPU 38 +#define CLK_GPU1 39 +#define CLK_CE 40 +#define CLK_BUS_CE 41 +#define CLK_VE 42 +#define CLK_BUS_VE 43 +#define CLK_BUS_DMA 44 +#define CLK_BUS_HSTIMER 45 +#define CLK_AVS 46 +#define CLK_BUS_DBG 47 +#define CLK_BUS_PSI 48 +#define CLK_BUS_PWM 49 +#define CLK_BUS_IOMMU 50 + +#define CLK_MBUS_DMA 52 +#define CLK_MBUS_VE 53 +#define CLK_MBUS_CE 54 +#define CLK_MBUS_TS 55 +#define CLK_MBUS_NAND 56 +#define CLK_MBUS_G2D 57 + +#define CLK_NAND0 59 +#define CLK_NAND1 60 +#define CLK_BUS_NAND 61 +#define CLK_MMC0 62 +#define CLK_MMC1 63 +#define CLK_MMC2 64 +#define CLK_BUS_MMC0 65 +#define CLK_BUS_MMC1 66 +#define CLK_BUS_MMC2 67 +#define CLK_BUS_UART0 68 +#define CLK_BUS_UART1 69 +#define CLK_BUS_UART2 70 +#define CLK_BUS_UART3 71 +#define CLK_BUS_UART4 72 +#define CLK_BUS_UART5 73 +#define CLK_BUS_I2C0 74 +#define CLK_BUS_I2C1 75 +#define CLK_BUS_I2C2 76 +#define CLK_BUS_I2C3 77 +#define CLK_BUS_I2C4 78 +#define CLK_SPI0 79 +#define CLK_SPI1 80 +#define CLK_BUS_SPI0 81 +#define CLK_BUS_SPI1 82 +#define CLK_EMAC_25M 83 +#define CLK_BUS_EMAC0 84 +#define CLK_BUS_EMAC1 85 +#define CLK_TS 86 +#define CLK_BUS_TS 87 +#define CLK_BUS_THS 88 +#define CLK_SPDIF 89 +#define CLK_BUS_SPDIF 90 +#define CLK_DMIC 91 +#define CLK_BUS_DMIC 92 +#define CLK_AUDIO_CODEC_1X 93 +#define CLK_AUDIO_CODEC_4X 94 +#define CLK_BUS_AUDIO_CODEC 95 +#define CLK_AUDIO_HUB 96 +#define CLK_BUS_AUDIO_HUB 97 +#define CLK_USB_OHCI0 98 +#define CLK_USB_PHY0 99 +#define CLK_USB_OHCI1 100 +#define CLK_USB_PHY1 101 +#define CLK_USB_OHCI2 102 +#define CLK_USB_PHY2 103 +#define CLK_USB_OHCI3 104 +#define CLK_USB_PHY3 105 +#define CLK_BUS_OHCI0 106 +#define CLK_BUS_OHCI1 107 +#define CLK_BUS_OHCI2 108 +#define CLK_BUS_OHCI3 109 +#define CLK_BUS_EHCI0 110 +#define CLK_BUS_EHCI1 111 +#define CLK_BUS_EHCI2 112 +#define CLK_BUS_EHCI3 113 +#define CLK_BUS_OTG 114 +#define CLK_BUS_KEYADC 115 +#define CLK_HDMI 116 +#define CLK_HDMI_SLOW 117 +#define CLK_HDMI_CEC 118 +#define CLK_BUS_HDMI 119 +#define CLK_BUS_TCON_TOP 120 +#define CLK_TCON_TV0 121 +#define CLK_BUS_TCON_TV0 122 +#define CLK_HDCP 123 +#define CLK_BUS_HDCP 124 + +#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */ diff --git a/include/dt-bindings/reset/sun50i-h616-ccu.h b/include/dt-bindings/reset/sun50i-h616-ccu.h new file mode 100644 index 000000000000..1c992cfbbbab --- /dev/null +++ b/include/dt-bindings/reset/sun50i-h616-ccu.h @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2017 Icenowy Zheng + */ + +#ifndef _DT_BINDINGS_RESET_SUN50I_H616_H_ +#define _DT_BINDINGS_RESET_SUN50I_H616_H_ + +#define RST_MBUS 0 +#define RST_BUS_DE 1 +#define RST_BUS_DEINTERLACE 2 +#define RST_BUS_GPU 3 +#define RST_BUS_CE 4 +#define RST_BUS_VE 5 +#define RST_BUS_DMA 6 +#define RST_BUS_HSTIMER 7 +#define RST_BUS_DBG 8 +#define RST_BUS_PSI 9 +#define RST_BUS_PWM 10 +#define RST_BUS_IOMMU 11 +#define RST_BUS_DRAM 12 +#define RST_BUS_NAND 13 +#define RST_BUS_MMC0 14 +#define RST_BUS_MMC1 15 +#define RST_BUS_MMC2 16 +#define RST_BUS_UART0 17 +#define RST_BUS_UART1 18 +#define RST_BUS_UART2 19 +#define RST_BUS_UART3 20 +#define RST_BUS_UART4 21 +#define RST_BUS_UART5 22 +#define RST_BUS_I2C0 23 +#define RST_BUS_I2C1 24 +#define RST_BUS_I2C2 25 +#define RST_BUS_I2C3 26 +#define RST_BUS_I2C4 27 +#define RST_BUS_SPI0 28 +#define RST_BUS_SPI1 29 +#define RST_BUS_EMAC0 30 +#define RST_BUS_EMAC1 31 +#define RST_BUS_TS 32 +#define RST_BUS_THS 33 +#define RST_BUS_SPDIF 34 +#define RST_BUS_DMIC 35 +#define RST_BUS_AUDIO_CODEC 36 +#define RST_BUS_AUDIO_HUB 37 +#define RST_USB_PHY0 38 +#define RST_USB_PHY1 39 +#define RST_USB_PHY2 40 +#define RST_USB_PHY3 41 +#define RST_BUS_OHCI0 42 +#define RST_BUS_OHCI1 43 +#define RST_BUS_OHCI2 44 +#define RST_BUS_OHCI3 45 +#define RST_BUS_EHCI0 46 +#define RST_BUS_EHCI1 47 +#define RST_BUS_EHCI2 48 +#define RST_BUS_EHCI3 49 +#define RST_BUS_OTG 50 +#define RST_BUS_HDMI 51 +#define RST_BUS_HDMI_SUB 52 +#define RST_BUS_TCON_TOP 53 +#define RST_BUS_TCON_TV0 54 +#define RST_BUS_HDCP 55 +#define RST_BUS_KEYADC 56 + +#endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */ -- 2.17.5