Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965357AbWH2U6h (ORCPT ); Tue, 29 Aug 2006 16:58:37 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965358AbWH2U6g (ORCPT ); Tue, 29 Aug 2006 16:58:36 -0400 Received: from nz-out-0102.google.com ([64.233.162.203]:62623 "EHLO nz-out-0102.google.com") by vger.kernel.org with ESMTP id S965356AbWH2U6b (ORCPT ); Tue, 29 Aug 2006 16:58:31 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:subject:from:to:cc:content-type:date:message-id:mime-version:x-mailer; b=pb+eb96Q+Jr+JB3BHI1m2MGTJCL4UKrHvEQOdmhwGC0dIm/atQn+YnAkrhiBCRGTuB/LaxOfz22py+zaFEzs/mxKarJNOI99psLhTsHr51ioAhO4gLOLd/0opq8mgk+RbdypEuAkT1W1reLDTBjP80VUEcJxCVSxCAL5dx0pe1w= Subject: PROBLEM: HT1000 drops network packets during disk writes From: Alex Izvorski To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org Cc: nsankar@broadcom.com, jgarzik@pobox.com, support@supermicro.com Content-Type: multipart/mixed; boundary="=-+yhAMLr1psaIxOAiBtZN" Date: Tue, 29 Aug 2006 13:59:32 -0700 Message-Id: <1156885172.1399.955.camel@farstar> Mime-Version: 1.0 X-Mailer: Evolution 2.4.2.1 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 80140 Lines: 2946 --=-+yhAMLr1psaIxOAiBtZN Content-Type: text/plain Content-Transfer-Encoding: 7bit Any ideas? I would be happy to help test any fixes and/or provide a test system, if anyone wants to tackle this. Regards, -- Alex Izvorski [1.] One line summary of the problem: HT1000 drops network packets during disk writes [2.] Full description of the problem: A lot of dropped network packets on onboard gigabit controller (tg3) if _any_ disk writes are done on onboard SATA controller (sata_svw) at the same time, on a HT1000-based system. Packet drop 0.2-1% can be caused by minimal disk writes (a few kb/s) during moderate (100mbit/s or less) network I/O. This appears to be caused by disk writes only, and affects network reads only. [3.] Keywords: HT1000 HT-1000 sata_svw BC5785 sata tg3 Serverworks Broadcom [4.] Kernel version: All tested kernel versions (2.6.9 to 2.6.18-rc4) are affected. Tested: 2.6.18-rc4 2.6.17 RHEL4 2.6.9-34.ELsmp rpm [5.] Most recent kernel version which did not have the bug: all tested versions have this problem [7.] A small shell script or example program which triggers the problem on test box, run: dd if=/dev/zero of=testfile bs=1M count=1000 & iperf -s -u on another box connected via gigabit ethernet, run: iperf -c $ip_address_of_test_box -u -b 300m -l 1316 Typical results: Interval Transfer Bandwidth Jitter Lost/Total Datagrams (with disk access) 0.0-10.0 sec 358 MBytes 300 Mbits/sec 0.002 ms 820/285716 (0.29%) (without disk access) 0.0-10.0 sec 359 MBytes 301 Mbits/sec 0.003 ms 1/285716 (note the 1 "lost" is really zero lost, iperf always reports that) [8.] Environment cpu: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ motherboard: Supermicro H8SSL-i ram: 512MB ECC disk: HDS728080PLA380 operating system: CentOS 4.3 [8.1.] Software (add the output of the ver_linux script here) Linux localhost.localdomain 2.6.9-34.ELsmp #1 SMP Thu Mar 9 06:23:23 GMT 2006 x86_64 x86_64 x86_64 GNU/Linux Gnu C 3.4.5 Gnu make 3.80 binutils 2.15.92.0.2 util-linux 2.12a mount 2.12a module-init-tools 3.1-pre5 e2fsprogs 1.35 reiserfsprogs line reiser4progs line pcmcia-cs 3.2.7 quota-tools 3.12. PPP 2.4.2 isdn4k-utils 3.3 nfs-utils 1.0.6 Linux C Library 2.3.4 Dynamic linker (ldd) 2.3.4 Procps 3.2.3 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 Modules Loaded md5 ipv6 sunrpc tg3 ext3 jbd sata_svw libata sd_mod scsi_mod [8.2.] Processor information (from /proc/cpuinfo): AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ [8.3.] Module information (from /proc/modules): md5 5697 1 - Live 0xffffffffa0181000 ipv6 282785 12 - Live 0xffffffffa0138000 sunrpc 174905 1 - Live 0xffffffffa00e9000 tg3 103621 0 - Live 0xffffffffa0077000 ext3 137809 1 - Live 0xffffffffa0054000 jbd 68977 1 ext3, Live 0xffffffffa0042000 sata_svw 9925 2 - Live 0xffffffffa003e000 libata 66057 1 sata_svw, Live 0xffffffffa002c000 sd_mod 19393 3 - Live 0xffffffffa0026000 scsi_mod 140561 2 libata,sd_mod, Live 0xffffffffa0002000 [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 03c0-03df : vga+ 0500-0503 : PM1a_EVT_BLK 0504-0505 : PM1a_CNT_BLK 0508-050b : PM_TMR 0514-051b : GPE0_BLK 0540-0543 : PM1b_EVT_BLK 0544-0545 : PM1b_CNT_BLK 0550-0557 : GPE1_BLK 0cf8-0cff : PCI conf1 5010-5015 : ACPI CPU throttle a000-bfff : PCI Bus #01 a800-a81f : 0000:01:0e.0 a800-a81f : sata_svw a880-a883 : 0000:01:0e.0 a880-a883 : sata_svw ac00-ac07 : 0000:01:0e.0 ac00-ac07 : sata_svw b000-b003 : 0000:01:0e.0 b000-b003 : sata_svw b080-b087 : 0000:01:0e.0 b080-b087 : sata_svw d400-d4ff : 0000:00:03.0 d800-d8ff : 0000:00:03.1 e000-e0ff : 0000:00:05.0 e800-e8ff : 0000:00:03.2 ffa0-ffaf : 0000:00:02.1 ffa0-ffa7 : ide0 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000ca000-000cb7ff : Adapter ROM 000cb800-000ccfff : Adapter ROM 000cd000-000cdfff : Adapter ROM 000f0000-000fffff : System ROM 00100000-1ffeffff : System RAM 00100000-003090cf : Kernel code 003090d0-00449123 : Kernel data 1fff0000-1fffdfff : ACPI Tables 1fffe000-1fffffff : ACPI Non-volatile Storage fc900000-fcafffff : PCI Bus #01 fc900000-fc9fffff : PCI Bus #02 fc9c0000-fc9cffff : 0000:02:03.0 fc9c0000-fc9cffff : tg3 fc9d0000-fc9dffff : 0000:02:03.1 fc9d0000-fc9dffff : tg3 fcafe000-fcafffff : 0000:01:0e.0 fcafe000-fcafffff : sata_svw fd000000-fdffffff : 0000:00:05.0 febfb000-febfbfff : 0000:00:03.0 febfc000-febfcfff : 0000:00:03.1 febfd000-febfdfff : 0000:00:03.2 febff000-febfffff : 0000:00:05.0 fec00000-fec02fff : reserved fee00000-fee00fff : reserved ff500000-ff5fffff : PCI Bus #01 ff500000-ff5fffff : PCI Bus #02 ff780000-ffffffff : reserved [8.5.] PCI information ('lspci -vvv' as root) (lspci -vvv output attached) 00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge 00:02.0 Host bridge: Broadcom HT1000 Legacy South Bridge 00:02.1 IDE interface: Broadcom HT1000 Legacy IDE controller 00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge 00:03.0 USB Controller: Broadcom HT1000 USB Controller (rev 01) 00:03.1 USB Controller: Broadcom HT1000 USB Controller (rev 01) 00:03.2 USB Controller: Broadcom HT1000 USB Controller (rev 01) 00:05.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:0d.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2) 01:0e.0 RAID bus controller: Broadcom BCM5785 (HT1000) SATA Native SATA Mode 02:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) 02:03.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) [8.7.] Other information that might be relevant to the problem What the problem is probably not: - it does not require high I/O load: transfering 80-100Mbit/s over the network while writing only 30-40kb/s to disk causes some dropped packets. - it is not caused by disk reading, only by writing (including swap). - it is not caused by net writing, only by reading (*maybe* - need to test this more). - it is not a bug in iperf: exact same results in tcpdump and other programs which do network I/O. - it is not due to CPU load: cpu is mostly idle while doing the test; also loading the cpu 100% with several copies of burnK7 does not cause any dropped packets by itself, and adjusting the priority of iperf +/-15 has no effect. - it is not due to anything filesystem-related: writing to a disk device directly has the same effect. - it is not affected by the mode in which the SATA controller is in: BIOS choices are "MMIO" (native SATA) and "IDE" (legacy), results are identical in either. - it is not affected by any kernel settings tested: MSI on/off, preemptible/non-preemptible/preempt big kernel lock, SMP/non-SMP, flat/sparse/discontig memory, ... - it is not affected by any ethernet settings tested with ethtool: checksum offloading on/off, rx/tx queue size, coalescing... these cause some changes to the number of dropped packets, but there's always a considerable amount of drop. ==== --=-+yhAMLr1psaIxOAiBtZN Content-Disposition: attachment; filename=ht1000-dmesg.txt Content-Type: text/plain; name=ht1000-dmesg.txt; charset=us-ascii Content-Transfer-Encoding: 7bit Bootdata ok (command line is ro root=LABEL=/) Linux version 2.6.9-34.ELsmp (buildcentos@nasha.karan.org) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Thu Mar 9 06:23:23 GMT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fffe000 (ACPI data) BIOS-e820: 000000001fffe000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f7140 ACPI: RSDT (v001 A M I OEMRSDT 0x11000517 MSFT 0x00000097) @ 0x000000001fff0000 ACPI: FADT (v002 A M I OEMFACP 0x11000517 MSFT 0x00000097) @ 0x000000001fff0200 ACPI: MADT (v001 A M I OEMAPIC 0x11000517 MSFT 0x00000097) @ 0x000000001fff0390 ACPI: OEMB (v001 A M I AMI_OEM 0x11000517 MSFT 0x00000097) @ 0x000000001fffe040 ACPI: DSDT (v001 0ABSW 0ABSW005 0x00000005 INTL 0x02002026) @ 0x0000000000000000 Enabling SRAT NUMA discovery Warning: acpi_table_parse(ACPI_SRAT) returned 0! Warning: acpi_table_parse(ACPI_SLIT) returned 0! acpi_numa_init() failed, disabling ACPI NUMA config Scanning NUMA topology in Northbridge 24 Number of nodes 1 (10000) Node 0 MemBase 0000000000000000 Limit 000000001fff0000 Using 22 for the hash shift. Max addr is 1fff0000 Using node hash shift of 22 Bootmem setup node 0 0000000000000000-000000001fff0000 No mptable found. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: PM-Timer IO Port: 0x508 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Setting APIC routing to flat ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Checking aperture... CPU 0: aperture @ 8c02000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: ro root=LABEL=/ console=tty0 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2394.124 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 509240k/524224k available (2084k kernel code, 0k reserved, 1280k data, 192k init) Calibrating delay using timer specific routine.. 4793.01 BogoMIPS (lpj=2396507) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) AMD CPU0: Physical Processor ID: 0 AMD CPU0: Processor Core ID: 0 AMD CPU0: Initial APIC ID: 0 CPU 0(2) -> Node 0 Using local APIC NMI watchdog using perfctr0 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) AMD CPU0: Physical Processor ID: 0 AMD CPU0: Processor Core ID: 0 AMD CPU0: Initial APIC ID: 0 CPU 0(2) -> Node 0 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 per-CPU timeslice cutoff: 512.02 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/1 rip 6000 rsp 1001fe25f58 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.35 BogoMIPS (lpj=2393678) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) AMD CPU1: Physical Processor ID: 0 AMD CPU1: Processor Core ID: 1 AMD CPU1: Initial APIC ID: 1 CPU 1(2) -> Node 0 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 Total of 2 processors activated (9580.37 BogoMIPS). Using local APIC timer interrupts. Detected 12.469 MHz APIC timer. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNUS] (IRQs *10) ACPI: PCI Interrupt Link [LNSA] (IRQs *11) usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:03.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:03.2[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 19 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:01:0e.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 24 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:02:03.1[B] -> GSI 25 (level, low) -> IRQ 185 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1156856734.307:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 7BBEE86DB23DA574 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1 SvrWks HT1000: chipset revision 0 SvrWks HT1000: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 16384) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.04-rh) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: init not cpu 0 ACPI: (supports S0 S1 S5) ACPI wakeup devices: P1P2 USB0 USB1 USB2 PS2K PS2M SLPB Freeing unused kernel memory: 192k freed SCSI subsystem initialized libata version 1.20 loaded. sata_svw 0000:01:0e.0: version 1.07 ACPI: PCI interrupt 0000:01:0e.0[A] -> GSI 11 (level, low) -> IRQ 11 ata1: SATA max UDMA/133 cmd 0xFFFFFF0000004000 ctl 0xFFFFFF0000004020 bmdma 0xFFFFFF0000004030 irq 11 ata2: SATA max UDMA/133 cmd 0xFFFFFF0000004100 ctl 0xFFFFFF0000004120 bmdma 0xFFFFFF0000004130 irq 11 ata3: SATA max UDMA/133 cmd 0xFFFFFF0000004200 ctl 0xFFFFFF0000004220 bmdma 0xFFFFFF0000004230 irq 11 ata4: SATA max UDMA/133 cmd 0xFFFFFF0000004300 ctl 0xFFFFFF0000004320 bmdma 0xFFFFFF0000004330 irq 11 ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3468 86:3c01 87:4763 88:207f ata1: dev 0 ATA-7, max UDMA/133, 160836480 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_svw ata2: no device found (phy stat 00000004) scsi1 : sata_svw ata3: no device found (phy stat 00000004) scsi2 : sata_svw ata4: no device found (phy stat 00000004) scsi3 : sata_svw Using cfq io scheduler Vendor: ATA Model: HDS728080PLA380 Rev: PF2O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) SCSI device sda: drive cache: write back SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 5980215 EXT3-fs: sda1: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-34.ELsmp floppy0: no floppy controllers found tg3.c:v3.43-rh (Oct 24, 2005) ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 24 (level, low) -> IRQ 177 divert: allocating divert_blk for eth0 eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:30:48:56:64:32 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[769f4000] ACPI: PCI interrupt 0000:02:03.1[B] -> GSI 25 (level, low) -> IRQ 185 divert: allocating divert_blk for eth1 eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:30:48:56:64:33 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist ACPI: PCI interrupt 0000:00:03.2[A] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: irq 10, pci mem ffffff000001a000 ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: irq 10, pci mem ffffff000001c000 ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:03.1[A] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: irq 10, pci mem ffffff000001e000 ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] EXT3 FS on sda1, internal journal device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com Adding 2409708k swap on /dev/sda2. Priority:-1 extents:1 Linux Kernel Card Services options: [pci] [cardbus] [pm] ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. lp: driver loaded but no devices found NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff803fc400(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present ip_tables: (C) 2000-2002 Netfilter core team tg3: eth1: Link is up at 1000 Mbps, full duplex. tg3: eth1: Flow control is on for TX and on for RX. eth1: no IPv6 routers present unloading Kernel Card Services ohci_hcd 0000:00:03.0: remove, state 1 usb usb2: USB disconnect, address 1 ohci_hcd 0000:00:03.0: USB bus 2 deregistered ohci_hcd 0000:00:03.1: remove, state 1 usb usb3: USB disconnect, address 1 ohci_hcd 0000:00:03.1: USB bus 3 deregistered ehci_hcd 0000:00:03.2: remove, state 1 usb usb1: USB disconnect, address 1 ehci_hcd 0000:00:03.2: USB bus 1 deregistered device-mapper: cleaned up --=-+yhAMLr1psaIxOAiBtZN Content-Disposition: attachment; filename=ht1000-config-2.6.9-34.ELsmp Content-Type: text/plain; name=ht1000-config-2.6.9-34.ELsmp; charset=us-ascii Content-Transfer-Encoding: 7bit # # Automatically generated make config: don't edit # Linux kernel version: 2.6.9-34.ELsmp # Thu Mar 9 06:18:54 2006 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_HPET_TIMER=y CONFIG_X86_PM_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y # # General setup # CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDITFILESYSTEM=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y # CONFIG_TINY_SHMEM is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SIG=y # CONFIG_MODULE_SIG_FORCE is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Processor type and features # # CONFIG_MK8 is not set # CONFIG_MPSC is not set CONFIG_GENERIC_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_MICROCODE=m CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_HT=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_PREEMPT is not set CONFIG_SCHED_SMT=y CONFIG_K8_NUMA=y CONFIG_DISCONTIGMEM=y CONFIG_NUMA=y CONFIG_HAVE_DEC_LOCK=y CONFIG_NR_CPUS=8 CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y # # Power management options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_BLACKLIST_YEAR=2001 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # # CPU Frequency scaling # CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_PROC_INTF is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=m # CONFIG_CPU_FREQ_24_API is not set CONFIG_CPU_FREQ_TABLE=y # # CPUFreq processor drivers # CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_UNORDERED_IO is not set CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_NAMES is not set # # PCMCIA/CardBus support # CONFIG_PCMCIA=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_YENTA=m CONFIG_CARDBUS=y CONFIG_PD6729=m # CONFIG_I82092 is not set CONFIG_TCIC=m # # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m # CONFIG_HOTPLUG_PCI_CPCI is not set CONFIG_HOTPLUG_PCI_PCIE=m # CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_HOTPLUG_PCI_SHPC=m # CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_UID16=y # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) # CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CONCAT=m CONFIG_MTD_REDBOOT_PARTS=m # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers # CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=m CONFIG_MTD_BLOCK_RO=m CONFIG_FTL=m CONFIG_NFTL=m CONFIG_NFTL_RW=y # CONFIG_INFTL is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=m CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_CFI_AMDSTD_RETRY=3 CONFIG_MTD_CFI_STAA=m CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=m CONFIG_MTD_ROM=m CONFIG_MTD_ABSENT=m # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_PNC2000 is not set CONFIG_MTD_SC520CDP=m CONFIG_MTD_NETSC520=m # CONFIG_MTD_SBC_GXX is not set # CONFIG_MTD_ELAN_104NC is not set CONFIG_MTD_SCx200_DOCFLASH=m # CONFIG_MTD_AMD76XROM is not set CONFIG_MTD_ICHXROM=m # CONFIG_MTD_SCB2_FLASH is not set # CONFIG_MTD_NETtel is not set # CONFIG_MTD_DILNETPC is not set # CONFIG_MTD_L440GX is not set # CONFIG_MTD_PCI is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set CONFIG_MTD_MTDRAM=m CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 # CONFIG_MTD_BLKMTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set # # NAND Flash Device Drivers # CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_PC_PCMCIA=m # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_PARIDE is not set CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m CONFIG_CISS_SCSI_TAPE=y CONFIG_BLK_DEV_DAC960=m # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_SX8=m # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y CONFIG_DISKDUMP=m # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_DELKIN=m CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDESCSI=m # CONFIG_IDE_TASK_IOCTL is not set # CONFIG_IDE_TASKFILE_IO is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_AEC62XX=y CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y CONFIG_BLK_DEV_ATIIXP=y CONFIG_BLK_DEV_CMD64X=y CONFIG_BLK_DEV_TRIFLEX=y CONFIG_BLK_DEV_CY82C693=y CONFIG_BLK_DEV_CS5520=y CONFIG_BLK_DEV_CS5530=y CONFIG_BLK_DEV_HPT34X=y # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_IT8212=y # CONFIG_BLK_DEV_NS87415 is not set CONFIG_BLK_DEV_PDC202XX_OLD=y # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_PDC202XX_FORCE=y CONFIG_BLK_DEV_SVWKS=y CONFIG_BLK_DEV_SIIMAGE=y CONFIG_BLK_DEV_SIS5513=y CONFIG_BLK_DEV_SLC90E66=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=m CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_SCSI_DUMP=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SAS_CLASS=m # CONFIG_SAS_DEBUG is not set # # SCSI low-level drivers # CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC94XX is not set CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=4 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_ENABLE_RD_STRM is not set # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m CONFIG_MEGARAID_SAS=m CONFIG_SCSI_SATA=y CONFIG_SCSI_SATA_AHCI=m CONFIG_SCSI_SATA_SVW=m CONFIG_SCSI_ATA_PIIX=m CONFIG_SCSI_SATA_NV=m CONFIG_SCSI_SATA_PROMISE=m CONFIG_SCSI_SATA_SX4=m CONFIG_SCSI_SATA_SIL=m CONFIG_SCSI_SATA_SIS=m CONFIG_SCSI_SATA_VIA=m CONFIG_SCSI_SATA_VITESSE=m # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_FUTURE_DOMAIN is not set CONFIG_SCSI_GDTH=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_ISCSI_SFNET=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA2XXX=m CONFIG_SCSI_QLA21XX=m CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m CONFIG_SCSI_QLA24XX=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # # PCMCIA SCSI adapter support # # CONFIG_PCMCIA_FDOMAIN is not set # CONFIG_PCMCIA_QLOGIC is not set # CONFIG_PCMCIA_SYM53C500 is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m # # Fusion MPT device support # CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=40 CONFIG_FUSION_CTL=m CONFIG_FUSION_LAN=m CONFIG_FUSION_OLD_MODULE_COMPAT=m # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # CONFIG_I2O=m CONFIG_I2O_CONFIG=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_TUNNEL=m # # IP: Virtual Server Configuration # CONFIG_IP_VS=m # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # # IPVS application helper # CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_CT_ACCT=y CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_PHYSDEV=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_REALM=m CONFIG_IP_NF_MATCH_SCTP=m CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m CONFIG_IP_NF_NAT_LOCAL=y CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # # IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_LIMIT=m CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_RAW=m # # Bridge: Netfilter Configuration # CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_XFRM=y CONFIG_XFRM_USER=y # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m # CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_NET_CLS_IND=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m # # Bluetooth device drivers # CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUSB_SCO=y CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_BCSP_TXCRC=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m CONFIG_TUX=m # # TUX options # CONFIG_TUX_EXTCGI=y # CONFIG_TUX_EXTENDED_LOG is not set # CONFIG_TUX_DEBUG is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m CONFIG_ETHERTAP=m # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m # # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y # CONFIG_TULIP_NAPI is not set CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_PCMCIA_XIRCOM=m # CONFIG_HP100 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m CONFIG_AMD8111E_NAPI=y CONFIG_ADAPTEC_STARFIRE=m CONFIG_ADAPTEC_STARFIRE_NAPI=y CONFIG_B44=m CONFIG_FORCEDETH=m # CONFIG_DGRS is not set CONFIG_EEPRO100=m # CONFIG_EEPRO100_PIO is not set CONFIG_E100=m CONFIG_E100_NAPI=y CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=m CONFIG_EPIC100=m # CONFIG_SUNDANCE is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000_NAPI=y CONFIG_NS83820=m # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=m CONFIG_R8169_NAPI=y CONFIG_SKY2=m CONFIG_SK98LIN=m CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m # # Ethernet (10000 Mbit) # CONFIG_IXGB=m CONFIG_IXGB_NAPI=y CONFIG_S2IO=m CONFIG_S2IO_NAPI=y # # Token Ring devices # CONFIG_TR=y CONFIG_IBMOL=m CONFIG_3C359=m CONFIG_TMS380TR=m CONFIG_TMSPCI=m CONFIG_ABYSS=m # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y # # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set CONFIG_PCMCIA_WAVELAN=m CONFIG_PCMCIA_NETWAVE=m # # Wireless 802.11 Frequency Hopping cards support # # CONFIG_PCMCIA_RAYCS is not set # # Wireless 802.11b ISA/PCI cards support # CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT=m CONFIG_IEEE80211_WPA=m CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IPW2100=m CONFIG_IPW2100_PROMISC=y # CONFIG_IPW_DEBUG is not set CONFIG_IPW2200=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_PCI_HERMES=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m # # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m CONFIG_AIRO_CS=m CONFIG_PCMCIA_ATMEL=m CONFIG_PCMCIA_WL3501=m # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m CONFIG_NET_WIRELESS=y # # PCMCIA network device support # CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_NMCLAN=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m # # Wan interfaces # # CONFIG_WAN is not set # # ATM drivers # CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m # CONFIG_ATM_ENI_DEBUG is not set # CONFIG_ATM_ENI_TUNE_BURST is not set CONFIG_ATM_FIRESTREAM=m # CONFIG_ATM_ZATM is not set CONFIG_ATM_IDT77252=m # CONFIG_ATM_IDT77252_DEBUG is not set # CONFIG_ATM_IDT77252_RCV_ALL is not set CONFIG_ATM_IDT77252_USE_SUNI=y CONFIG_ATM_AMBASSADOR=m # CONFIG_ATM_AMBASSADOR_DEBUG is not set CONFIG_ATM_HORIZON=m # CONFIG_ATM_HORIZON_DEBUG is not set CONFIG_ATM_FORE200E_MAYBE=m # CONFIG_ATM_FORE200E_PCA is not set CONFIG_ATM_HE=m # CONFIG_ATM_HE_USE_SUNI is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set # CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set CONFIG_PPPOE=m CONFIG_PPPOATM=m # CONFIG_SLIP is not set CONFIG_NET_FC=y # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=m CONFIG_NETDUMP=m # # ISDN subsystem # CONFIG_ISDN=m # # Old ISDN4Linux # CONFIG_ISDN_I4L=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y CONFIG_IPPP_FILTER=y # CONFIG_ISDN_PPP_BSDCOMP is not set CONFIG_ISDN_AUDIO=y CONFIG_ISDN_TTY_FAX=y # # ISDN feature submodules # # # ISDN4Linux hardware drivers # # # Passive cards # CONFIG_ISDN_DRV_HISAX=m # # D-channel protocol features # CONFIG_HISAX_EURO=y CONFIG_DE_AOC=y CONFIG_HISAX_NO_SENDCOMPLETE=y CONFIG_HISAX_NO_LLC=y CONFIG_HISAX_NO_KEYPAD=y CONFIG_HISAX_1TR6=y CONFIG_HISAX_NI1=y CONFIG_HISAX_MAX_CARDS=8 # # HiSax supported cards # CONFIG_HISAX_16_3=y CONFIG_HISAX_TELESPCI=y CONFIG_HISAX_S0BOX=y CONFIG_HISAX_FRITZPCI=y CONFIG_HISAX_AVM_A1_PCMCIA=y CONFIG_HISAX_ELSA=y CONFIG_HISAX_DIEHLDIVA=y CONFIG_HISAX_SEDLBAUER=y CONFIG_HISAX_NETJET=y CONFIG_HISAX_NETJET_U=y CONFIG_HISAX_NICCY=y CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_SCT_QUADRO=y CONFIG_HISAX_GAZEL=y CONFIG_HISAX_HFC_PCI=y CONFIG_HISAX_W6692=y CONFIG_HISAX_HFC_SX=y CONFIG_HISAX_ENTERNOW_PCI=y # CONFIG_HISAX_DEBUG is not set # # HiSax PCMCIA card service modules # CONFIG_HISAX_SEDLBAUER_CS=m CONFIG_HISAX_ELSA_CS=m CONFIG_HISAX_AVM_A1_CS=m CONFIG_HISAX_TELES_CS=m # # HiSax sub driver modules # CONFIG_HISAX_ST5481=m CONFIG_HISAX_HFCUSB=m CONFIG_HISAX_FRITZ_PCIPNP=m CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_ISDN_DRV_TPAM=m # # CAPI subsystem # CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_CAPIFS_BOOL=y CONFIG_ISDN_CAPI_CAPIFS=m CONFIG_ISDN_CAPI_CAPIDRV=m # # CAPI hardware drivers # # # Active AVM cards # CONFIG_CAPI_AVM=y CONFIG_ISDN_DRV_AVMB1_B1PCI=m CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m CONFIG_ISDN_DRV_AVMB1_AVM_CS=m CONFIG_ISDN_DRV_AVMB1_T1PCI=m CONFIG_ISDN_DRV_AVMB1_C4=m # # Active Eicon DIVA Server cards # # CONFIG_CAPI_EICON is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_VSXXXAA=m CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDDLER is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m CONFIG_INPUT_UINPUT=m # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set CONFIG_N_HDLC=m CONFIG_STALDRV=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CS=m # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_MULTIPORT=y CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_CRASH=m CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m # CONFIG_TIPAR is not set # # IPMI # CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m CONFIG_SC520_WDT=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m CONFIG_WAFER_WDT=m CONFIG_I8XX_TCO=m CONFIG_SC1200_WDT=m # CONFIG_SCx200_WDT is not set # CONFIG_60XX_WDT is not set CONFIG_CPU5_WDT=m CONFIG_W83627HF_WDT=m CONFIG_W83877F_WDT=m CONFIG_MACHZ_WDT=m # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set CONFIG_RTC=y CONFIG_DTLK=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL_MCH=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m # CONFIG_DRM_SIS is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set CONFIG_RAW_DRIVER=y # CONFIG_HPET is not set CONFIG_MAX_RAW_DEVS=8192 CONFIG_HANGCHECK_TIMER=m # # I2C support # CONFIG_I2C=m CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI1563=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_I810=m CONFIG_I2C_ISA=m CONFIG_I2C_NFORCE2=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_PROSAVAGE=m CONFIG_I2C_SAVAGE4=m # CONFIG_SCx200_ACB is not set CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m CONFIG_I2C_VOODOO3=m # CONFIG_I2C_PCA_ISA is not set # # Hardware Sensors Chip support # CONFIG_I2C_SENSOR=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_FSCHER=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83627HF=m # # Other I2C Chip support # CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_RTC8564=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # # # Video Adapters # # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_W9966 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set CONFIG_VIDEO_OVCAMCHIP=m # # Radio Adapters # # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_CIRRUS=m # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set CONFIG_FB_RIVA=m # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set CONFIG_FB_KYRO=m # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_BIT32_EMUL=m CONFIG_SND_RTCTIMER=m # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=m # # PCI devices # CONFIG_SND_AC97_CODEC=m CONFIG_SND_ALI5451=m CONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=m CONFIG_SND_AU8820=m CONFIG_SND_AU8830=m CONFIG_SND_AZT3328=m CONFIG_SND_AZX=m CONFIG_SND_BT87X=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m CONFIG_SND_KORG1212=m CONFIG_SND_MIXART=m CONFIG_SND_NM256=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_HDSP=m CONFIG_SND_TRIDENT=m CONFIG_SND_YMFPCI=m CONFIG_SND_ALS4000=m CONFIG_SND_CMIPCI=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_MAESTRO3=m CONFIG_SND_FM801=m CONFIG_SND_FM801_TEA575X=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_SONICVIBES=m CONFIG_SND_VIA82XX=m CONFIG_SND_VX222=m # # ALSA USB devices # CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_USX2Y=m # # PCMCIA devices # # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # # USB Bluetooth TTY can only be used with disabled Bluetooth subsystem # CONFIG_USB_MIDI=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_RW_DETECT=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_HP8200e=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y CONFIG_HID_FF=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y CONFIG_THRUSTMASTER_FF=y CONFIG_USB_HIDDEV=y CONFIG_USB_AIPTEK=m CONFIG_USB_WACOM=m CONFIG_USB_KBTAB=m CONFIG_USB_POWERMATE=m CONFIG_USB_MTOUCH=m CONFIG_USB_EGALAX=m CONFIG_USB_XPAD=m CONFIG_USB_ATI_REMOTE=m # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m CONFIG_USB_HPUSBSCSI=m # # USB Multimedia devices # CONFIG_USB_DABUSB=m CONFIG_USB_VICAM=m CONFIG_USB_DSBR=m CONFIG_USB_IBMCAM=m CONFIG_USB_KONICAWC=m CONFIG_USB_OV511=m CONFIG_USB_SE401=m CONFIG_USB_SN9C102=m CONFIG_USB_STV680=m CONFIG_USB_W9968CF=m CONFIG_USB_PWC=m # # USB Network adaptors # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m # # USB Host-to-Host Cables # CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_GENESYS=y CONFIG_USB_NET1080=y CONFIG_USB_PL2301=y # # Intelligent USB Devices/Gadgets # CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_ZAURUS=y CONFIG_USB_CDCETHER=y # # USB Network Adapters # CONFIG_USB_AX8817X=y # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KEYSPAN_MPR=y CONFIG_USB_SERIAL_KEYSPAN_USA28=y CONFIG_USB_SERIAL_KEYSPAN_USA28X=y CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y CONFIG_USB_SERIAL_KEYSPAN_USA19=y CONFIG_USB_SERIAL_KEYSPAN_USA18X=y CONFIG_USB_SERIAL_KEYSPAN_USA19W=y CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y CONFIG_USB_SERIAL_KEYSPAN_USA49W=y CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EZUSB=y # # USB Miscellaneous drivers # CONFIG_USB_EMI62=m # CONFIG_USB_EMI26 is not set # CONFIG_USB_TIGL is not set CONFIG_USB_AUERSWALD=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_LED=m # CONFIG_USB_CYTHERM is not set CONFIG_USB_PHIDGETSERVO=m CONFIG_USB_TEST=m # # USB ATM/DSL drivers # CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # InfiniBand support # CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set CONFIG_INFINIBAND_SDP=m # CONFIG_INFINIBAND_SDP_DEBUG is not set CONFIG_INFINIBAND_SRP=m # # EDAC - error detection and reporting (RAS) # CONFIG_EDAC=m # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=m CONFIG_EDAC_AMD76X=m CONFIG_EDAC_E7XXX=m CONFIG_EDAC_E752X=m CONFIG_EDAC_I82875P=m CONFIG_EDAC_I82860=m CONFIG_EDAC_R82600=m CONFIG_EDAC_POLL=y # # Firmware Drivers # CONFIG_EDD=m CONFIG_DELL_RBU=m # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y CONFIG_TMPFS_XATTR=y CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_NAND=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=m CONFIG_VXFS_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y CONFIG_EFI_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # # Profiling support # CONFIG_PROFILING=y CONFIG_OPROFILE=m # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y CONFIG_INIT_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_IOMMU_DEBUG is not set CONFIG_KPROBES=y # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y # CONFIG_SECURITY_SELINUX_MLS is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_SIGNATURE=y CONFIG_CRYPTO_SIGNATURE_DSA=y CONFIG_CRYPTO_MPILIB=y # # Library routines # CONFIG_CRC_CCITT=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m --=-+yhAMLr1psaIxOAiBtZN Content-Disposition: attachment; filename=ht1000-lspci-vvv.txt Content-Type: text/plain; name=ht1000-lspci-vvv.txt; charset=us-ascii Content-Transfer-Encoding: 7bit 00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ SERR- TAbort- Reset- FastB2B- Capabilities: [90] PCI-X bridge device. Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3 Status: Bus=0 Dev=1 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD- : Upstream: Capacity=0, Commitment Limit=0 : Downstream: Capacity=0, Commitment Limit=0 Capabilities: [a0] HyperTransport: MSI Mapping Capabilities: [b0] HyperTransport: Slave or Primary Interface Command: BaseUnitID=1 UnitCnt=3 MastHost- DefDir- Link Control 0: CFlE- CST- CFE- TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at ffa0 [size=16] 00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge Subsystem: Broadcom: Unknown device 0230 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [90] PCI-X bridge device. Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0 Status: Bus=1 Dev=13 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD- : Upstream: Capacity=8, Commitment Limit=8 : Downstream: Capacity=8, Commitment Limit=8 01:0e.0 RAID bus controller: Broadcom BCM5785 (HT1000) SATA Native SATA Mode Subsystem: Broadcom BCM5785 (HT1000) SATA Native SATA Mode Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-