Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 7/8] arm64: dts: allwinner: Add Allwinner H616 .dtsi file
To:     Andre Przywara <andre.przywara@arm.com>,
        Maxime Ripard <mripard@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@siol.net>
Cc:     devicetree@vger.kernel.org,
        Linus Walleij <linus.walleij@linaro.org>,
        linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
        Rob Herring <robh+dt@kernel.org>,
        Icenowy Zheng <icenowy@aosc.xyz>,
        Yangtao Li <frank@allwinnertech.com>,
        linux-arm-kernel@lists.infradead.org
References: <20201202135409.13683-1-andre.przywara@arm.com>
 <20201202135409.13683-8-andre.przywara@arm.com>
From:   Samuel Holland <samuel@sholland.org>
Message-ID: <3b4f4bf6-2fba-5d35-bdf5-74b8ced10357@sholland.org>
Date:   Wed, 2 Dec 2020 21:16:49 -0600
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.6.0
MIME-Version: 1.0
In-Reply-To: <20201202135409.13683-8-andre.przywara@arm.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

Andre,

On 12/2/20 7:54 AM, Andre Przywara wrote:
...
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0x0 0x40000000>;
> +
> +		syscon: syscon@3000000 {
> +			compatible = "allwinner,sun50i-h616-system-control",
> +				     "allwinner,sun50i-a64-system-control";
> +			reg = <0x03000000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			sram_c: sram@28000 {
> +				compatible = "mmio-sram";
> +				reg = <0x00028000 0x30000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x00028000 0x30000>;
> +			};
> +
> +			sram_c1: sram@1a00000 {
> +				compatible = "mmio-sram";
> +				reg = <0x01a00000 0x200000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x01a00000 0x200000>;
> +
> +				ve_sram: sram-section@0 {
> +					compatible = "allwinner,sun50i-h616-sram-c1",
> +						     "allwinner,sun4i-a10-sram-c1";
> +					reg = <0x000000 0x200000>;
> +				};
> +			};
> +		};

You mentioned that you could not find a SRAM A2. How were these SRAM ranges
verified? If you can load eGON.BT0 larger than 32 KiB, then presumably NBROM
uses SRAM C, and it is in the manual, but I see no mention of SRAM C1.

Cheers,
Samuel