Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Tue, 8 Dec 2020 16:37:47 +0900
From:   AKASHI Takahiro <takahiro.akashi@linaro.org>
To:     Adrian Hunter <adrian.hunter@intel.com>
Cc:     ulf.hansson@linaro.org, linux-mmc@vger.kernel.org,
        linux-kernel@vger.kernel.org, ben.chuang@genesyslogic.com.tw,
        greg.tu@genesyslogic.com.tw
Subject: Re: [RFC PATCH v3.1 21/27] mmc: sdhci-uhs2: add irq() and others
Message-ID: <20201208073747.GA31973@laputa>
Mail-Followup-To: AKASHI Takahiro <takahiro.akashi@linaro.org>,
        Adrian Hunter <adrian.hunter@intel.com>, ulf.hansson@linaro.org,
        linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
        ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw
References: <20201106022726.19831-1-takahiro.akashi@linaro.org>
 <20201106022726.19831-22-takahiro.akashi@linaro.org>
 <6428d694-f829-894f-fb64-47d01dac4325@intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <6428d694-f829-894f-fb64-47d01dac4325@intel.com>
Precedence: bulk

On Tue, Dec 01, 2020 at 06:46:39PM +0200, Adrian Hunter wrote:
> On 6/11/20 4:27 am, AKASHI Takahiro wrote:
> > This is a UHS-II version of sdhci's request() operation.
> > It handles UHS-II related command interrupts and errors.
> > 
> > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > ---
> >  drivers/mmc/host/sdhci-uhs2.c | 247 ++++++++++++++++++++++++++++++++++
> >  drivers/mmc/host/sdhci-uhs2.h |   3 +
> >  drivers/mmc/host/sdhci.c      | 112 ++++++++-------
> >  drivers/mmc/host/sdhci.h      |   6 +
> >  4 files changed, 319 insertions(+), 49 deletions(-)
> > 
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index 36e52553977a..d50134e912f3 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -11,6 +11,7 @@
> >   */
> >  
> >  #include <linux/delay.h>
> > +#include <linux/dmaengine.h>
> >  #include <linux/ktime.h>
> >  #include <linux/module.h>
> >  #include <linux/mmc/mmc.h>
> > @@ -670,6 +671,12 @@ static inline void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
> >  						   struct mmc_command *cmd)
> >  {
> >  }
> > +
> > +static inline struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
> > +							  struct mmc_data *data)
> > +{
> > +	return NULL;
> > +}
> >  #endif /* CONFIG_MMC_SDHCI_EXTERNAL_DMA */
> >  
> >  static void sdhci_uhs2_finish_data(struct sdhci_host *host)
> > @@ -1051,6 +1058,246 @@ static void sdhci_uhs2_finish_command(struct sdhci_host *host)
> >  	}
> >  }
> >  
> > +/*****************************************************************************\
> > + *                                                                           *
> > + * Request done                                                              *
> > + *                                                                           *
> > +\*****************************************************************************/
> > +
> > +static bool sdhci_uhs2_request_done(struct sdhci_host *host)
> > +{
> > +	unsigned long flags;
> > +	struct mmc_request *mrq;
> > +	int i;
> > +
> > +	/* FIXME: UHS2_INITIALIZED, instead? */
> > +	if (!(host->mmc->flags & MMC_UHS2_SUPPORT))
> > +		return sdhci_request_done(host);
> > +
> > +	spin_lock_irqsave(&host->lock, flags);
> > +
> > +	for (i = 0; i < SDHCI_MAX_MRQS; i++) {
> > +		mrq = host->mrqs_done[i];
> > +		if (mrq)
> > +			break;
> > +	}
> > +
> > +	if (!mrq) {
> > +		spin_unlock_irqrestore(&host->lock, flags);
> > +		return true;
> > +	}
> > +
> > +	/*
> > +	 * Always unmap the data buffers if they were mapped by
> > +	 * sdhci_prepare_data() whenever we finish with a request.
> > +	 * This avoids leaking DMA mappings on error.
> > +	 */
> > +	if (host->flags & SDHCI_REQ_USE_DMA) {
> > +		struct mmc_data *data = mrq->data;
> > +
> > +		if (host->use_external_dma && data &&
> > +		    (mrq->cmd->error || data->error)) {
> > +			struct dma_chan *chan = sdhci_external_dma_channel(host, data);
> > +
> > +			host->mrqs_done[i] = NULL;
> > +			spin_unlock_irqrestore(&host->lock, flags);
> > +			dmaengine_terminate_sync(chan);
> > +			spin_lock_irqsave(&host->lock, flags);
> > +			sdhci_set_mrq_done(host, mrq);
> > +		}
> > +
> > +		sdhci_request_done_dma(host, mrq);
> > +	}
> > +
> > +	/*
> > +	 * The controller needs a reset of internal state machines
> > +	 * upon error conditions.
> > +	 */
> > +	if (sdhci_needs_reset(host, mrq)) {
> > +		/*
> > +		 * Do not finish until command and data lines are available for
> > +		 * reset. Note there can only be one other mrq, so it cannot
> > +		 * also be in mrqs_done, otherwise host->cmd and host->data_cmd
> > +		 * would both be null.
> > +		 */
> > +		if (host->cmd || host->data_cmd) {
> > +			spin_unlock_irqrestore(&host->lock, flags);
> > +			return true;
> > +		}
> > +
> > +		/* Some controllers need this kick or reset won't work here */
> > +		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
> > +			/* This is to force an update */
> > +			host->ops->set_clock(host, host->clock);
> > +
> > +		sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD);
> 
> It should be possible to use the ->reset() callback for UHS-II also, then
> this function wouldn't be needed.

The reason that I didn't so is that the second argument is 'u8' for
legacy, and u16 for uhs-2, more importantly that the register to be
accessed here is different and hence that the same bit may have a different
meaning/semantics. I thought that this kind of dependency can be confusing
and should be avoided.

That said, if you really want to use reset hook, I'd defer to you.

> 
> > +		host->pending_reset = false;
> > +	}
> > +
> > +	host->mrqs_done[i] = NULL;
> > +
> > +	spin_unlock_irqrestore(&host->lock, flags);
> > +
> > +	if (host->ops->request_done)
> > +		host->ops->request_done(host, mrq);
> > +	else
> > +		mmc_request_done(host->mmc, mrq);
> > +
> > +	return false;
> > +}
> > +
> > +static void sdhci_uhs2_complete_work(struct work_struct *work)
> > +{
> > +	struct sdhci_host *host = container_of(work, struct sdhci_host,
> > +					       complete_work);
> > +
> > +	while (!sdhci_uhs2_request_done(host))
> > +		;
> > +}
> > +
> > +/*****************************************************************************\
> > + *                                                                           *
> > + * Interrupt handling                                                        *
> > + *                                                                           *
> > +\*****************************************************************************/
> > +
> > +static void __sdhci_uhs2_irq(struct sdhci_host *host, u32 uhs2mask)
> > +{
> > +	struct mmc_command *cmd = host->cmd;
> > +
> > +	DBG("*** %s got UHS2 error interrupt: 0x%08x\n",
> > +	    mmc_hostname(host->mmc), uhs2mask);
> > +
> > +	if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_CMD_MASK) {
> > +		if (!host->cmd) {
> > +			pr_err("%s: Got cmd interrupt 0x%08x but no cmd.\n",
> > +			       mmc_hostname(host->mmc),
> > +			       (unsigned int)uhs2mask);
> > +			sdhci_dumpregs(host);
> > +			return;
> > +		}
> > +		host->cmd->error = -EILSEQ;
> > +		if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT)
> > +			host->cmd->error = -ETIMEDOUT;
> > +	}
> > +
> > +	if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_DATA_MASK) {
> > +		if (!host->data) {
> > +			pr_err("%s: Got data interrupt 0x%08x but no data.\n",
> > +			       mmc_hostname(host->mmc),
> > +			       (unsigned int)uhs2mask);
> > +			sdhci_dumpregs(host);
> > +			return;
> > +		}
> > +
> > +		if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT) {
> > +			pr_err("%s: Got deadlock timeout interrupt 0x%08x\n",
> > +			       mmc_hostname(host->mmc),
> > +			       (unsigned int)uhs2mask);
> > +			host->data->error = -ETIMEDOUT;
> > +		} else if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_ADMA) {
> > +			pr_err("%s: ADMA error = 0x %x\n",
> > +			       mmc_hostname(host->mmc),
> > +			       sdhci_readb(host, SDHCI_ADMA_ERROR));
> > +			host->data->error = -EIO;
> > +		} else {
> > +			host->data->error = -EILSEQ;
> > +		}
> > +	}
> > +
> > +	if (host->data && host->data->error)
> > +		sdhci_uhs2_finish_data(host);
> > +	else
> > +		sdhci_finish_mrq(host, cmd->mrq);
> > +}
> > +
> > +u32 sdhci_uhs2_irq(struct sdhci_host *host, u32 intmask)
> > +{
> > +	u32 mask = intmask, uhs2mask;
> > +
> > +	if (!(host->mmc->flags & MMC_UHS2_SUPPORT))
> > +		goto out;
> > +
> > +	/*
> > +	 * TODO: We should mask Normal Error Interrupt Status Register
> > +	 * in UHS-2 mode so that we don't have to care SD mode errors.
> > +	 */
> > +	if (intmask & SDHCI_INT_ERROR) {
> > +		uhs2mask = sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS);
> > +		if (!(uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_MASK))
> > +			goto cmd_irq;
> > +
> > +		/* Clear error interrupts */
> > +		sdhci_writel(host, uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_MASK,
> > +			     SDHCI_UHS2_ERR_INT_STATUS);
> > +
> > +		/* Handle error interrupts */
> > +		__sdhci_uhs2_irq(host, uhs2mask);
> > +
> > +		/* Caller, shdci_irq(), doesn't have to care UHS-2 errors */
> > +		intmask &= ~SDHCI_INT_ERROR;
> > +		mask &= SDHCI_INT_ERROR;
> > +	}
> > +
> > +cmd_irq:
> > +	/*
> > +	 * TODO: Cleanup
> > +	 * INT_RESPONSE is enough instead of INT_CMD_MASK, assuming that
> > +	 * INT_ERROR and INT_CMD_MASK won't happen at the same time.
> > +	 */
> > +	if (intmask & SDHCI_INT_CMD_MASK) {
> > +		/* Clear command interrupt */
> > +                sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
> > +			     SDHCI_INT_STATUS);
> > +
> > +		/* Handle command interrupt */
> > +		if (intmask & SDHCI_INT_RESPONSE)
> > +			sdhci_uhs2_finish_command(host);
> > +
> > +		/* Caller, shdci_irq(), doesn't have to care UHS-2 command */
> > +		intmask &= ~SDHCI_INT_CMD_MASK;
> > +		mask &= SDHCI_INT_CMD_MASK;
> > +	}
> > +
> > +	/* Clear already-handled interrupts. */
> > +	sdhci_writel(host, mask, SDHCI_INT_STATUS);
> > +
> > +out:
> > +	return intmask;
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_uhs2_irq);
> > +
> > +static irqreturn_t sdhci_uhs2_thread_irq(int irq, void *dev_id)
> > +{
> > +	struct sdhci_host *host = dev_id;
> > +	struct mmc_command *cmd;
> > +	unsigned long flags;
> > +	u32 isr;
> > +
> > +	while (!sdhci_uhs2_request_done(host))
> > +		;
> > +
> > +	spin_lock_irqsave(&host->lock, flags);
> > +
> > +	isr = host->thread_isr;
> > +	host->thread_isr = 0;
> > +
> > +	cmd = host->deferred_cmd;
> 
> We don't need to use deferred_cmd, so then this function should not be
> needed.

I think that you meant that we should stick to sdhci_thread_irq() here.
Right?

-Takahiro Akashi

> For UHS-II we should require that the upper layer sends the abort
> command, so all the driver needs to do to handle errors, is to reset - which
> is already handled by sdhci_request_done() if you make use of the ->reset()
> callback.
> 
> > +	if (cmd && !sdhci_uhs2_send_command_retry(host, cmd, flags))
> > +		sdhci_finish_mrq(host, cmd->mrq);
> > +
> > +	spin_unlock_irqrestore(&host->lock, flags);
> > +
> > +	if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
> > +		struct mmc_host *mmc = host->mmc;
> > +
> > +		mmc->ops->card_event(mmc);
> > +		mmc_detect_change(mmc, msecs_to_jiffies(200));
> > +	}
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> >  /*****************************************************************************\
> >   *                                                                           *
> >   * Driver init/exit                                                          *
> > diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> > index c1ff4ac1ab7a..b74af641d00e 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.h
> > +++ b/drivers/mmc/host/sdhci-uhs2.h
> > @@ -215,5 +215,8 @@ void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode,
> >  			  unsigned short vdd);
> >  void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
> >  void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
> > +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq);
> > +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
> > +u32 sdhci_uhs2_irq(struct sdhci_host *host, u32 intmask);
> >  
> >  #endif /* __SDHCI_UHS2_H */
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index a9f5449bddcc..e2dfc7767bcf 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -1215,11 +1215,12 @@ static int sdhci_external_dma_init(struct sdhci_host *host)
> >  	return ret;
> >  }
> >  
> > -static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
> > -						   struct mmc_data *data)
> > +struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
> > +					    struct mmc_data *data)
> >  {
> >  	return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
> >  }
> > +EXPORT_SYMBOL_GPL(sdhci_external_dma_channel);
> >  
> >  int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd)
> >  {
> > @@ -1466,7 +1467,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
> >  	sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
> >  }
> >  
> > -static bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq)
> > +bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq)
> >  {
> >  	return (!(host->flags & SDHCI_DEVICE_DEAD) &&
> >  		((mrq->cmd && mrq->cmd->error) ||
> > @@ -1474,8 +1475,9 @@ static bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq)
> >  		 (mrq->data && mrq->data->stop && mrq->data->stop->error) ||
> >  		 (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)));
> >  }
> > +EXPORT_SYMBOL_GPL(sdhci_needs_reset);
> >  
> > -static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq)
> > +void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq)
> >  {
> >  	int i;
> >  
> > @@ -1495,6 +1497,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq)
> >  
> >  	WARN_ON(i >= SDHCI_MAX_MRQS);
> >  }
> > +EXPORT_SYMBOL_GPL(sdhci_set_mrq_done);
> >  
> >  void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> >  {
> > @@ -3029,7 +3032,56 @@ static const struct mmc_host_ops sdhci_ops = {
> >   *                                                                           *
> >  \*****************************************************************************/
> >  
> > -static bool sdhci_request_done(struct sdhci_host *host)
> > +void sdhci_request_done_dma(struct sdhci_host *host, struct mmc_request *mrq)
> > +{
> > +	struct mmc_data *data = mrq->data;
> > +
> > +	if (data && data->host_cookie == COOKIE_MAPPED) {
> > +		if (host->bounce_buffer) {
> > +			/*
> > +			 * On reads, copy the bounced data into the
> > +			 * sglist
> > +			 */
> > +			if (mmc_get_dma_dir(data) == DMA_FROM_DEVICE) {
> > +				unsigned int length = data->bytes_xfered;
> > +
> > +				if (length > host->bounce_buffer_size) {
> > +					pr_err("%s: bounce buffer is %u bytes but DMA claims to have transferred %u bytes\n",
> > +					       mmc_hostname(host->mmc),
> > +					       host->bounce_buffer_size,
> > +					       data->bytes_xfered);
> > +					/* Cap it down and continue */
> > +					length = host->bounce_buffer_size;
> > +				}
> > +				dma_sync_single_for_cpu(
> > +					host->mmc->parent,
> > +					host->bounce_addr,
> > +					host->bounce_buffer_size,
> > +					DMA_FROM_DEVICE);
> > +				sg_copy_from_buffer(data->sg,
> > +					data->sg_len,
> > +					host->bounce_buffer,
> > +					length);
> > +			} else {
> > +				/* No copying, just switch ownership */
> > +				dma_sync_single_for_cpu(
> > +					host->mmc->parent,
> > +					host->bounce_addr,
> > +					host->bounce_buffer_size,
> > +					mmc_get_dma_dir(data));
> > +			}
> > +		} else {
> > +			/* Unmap the raw data */
> > +			dma_unmap_sg(mmc_dev(host->mmc), data->sg,
> > +				     data->sg_len,
> > +				     mmc_get_dma_dir(data));
> > +		}
> > +		data->host_cookie = COOKIE_UNMAPPED;
> > +	}
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_request_done_dma);
> > +
> > +bool sdhci_request_done(struct sdhci_host *host)
> >  {
> >  	unsigned long flags;
> >  	struct mmc_request *mrq;
> > @@ -3067,48 +3119,7 @@ static bool sdhci_request_done(struct sdhci_host *host)
> >  			sdhci_set_mrq_done(host, mrq);
> >  		}
> >  
> > -		if (data && data->host_cookie == COOKIE_MAPPED) {
> > -			if (host->bounce_buffer) {
> > -				/*
> > -				 * On reads, copy the bounced data into the
> > -				 * sglist
> > -				 */
> > -				if (mmc_get_dma_dir(data) == DMA_FROM_DEVICE) {
> > -					unsigned int length = data->bytes_xfered;
> > -
> > -					if (length > host->bounce_buffer_size) {
> > -						pr_err("%s: bounce buffer is %u bytes but DMA claims to have transferred %u bytes\n",
> > -						       mmc_hostname(host->mmc),
> > -						       host->bounce_buffer_size,
> > -						       data->bytes_xfered);
> > -						/* Cap it down and continue */
> > -						length = host->bounce_buffer_size;
> > -					}
> > -					dma_sync_single_for_cpu(
> > -						host->mmc->parent,
> > -						host->bounce_addr,
> > -						host->bounce_buffer_size,
> > -						DMA_FROM_DEVICE);
> > -					sg_copy_from_buffer(data->sg,
> > -						data->sg_len,
> > -						host->bounce_buffer,
> > -						length);
> > -				} else {
> > -					/* No copying, just switch ownership */
> > -					dma_sync_single_for_cpu(
> > -						host->mmc->parent,
> > -						host->bounce_addr,
> > -						host->bounce_buffer_size,
> > -						mmc_get_dma_dir(data));
> > -				}
> > -			} else {
> > -				/* Unmap the raw data */
> > -				dma_unmap_sg(mmc_dev(host->mmc), data->sg,
> > -					     data->sg_len,
> > -					     mmc_get_dma_dir(data));
> > -			}
> > -			data->host_cookie = COOKIE_UNMAPPED;
> > -		}
> > +		sdhci_request_done_dma(host, mrq);
> >  	}
> >  
> >  	/*
> > @@ -3132,8 +3143,10 @@ static bool sdhci_request_done(struct sdhci_host *host)
> >  			/* This is to force an update */
> >  			host->ops->set_clock(host, host->clock);
> >  
> > -		/* Spec says we should do both at the same time, but Ricoh
> > -		   controllers do not like that. */
> > +		/*
> > +		 * Spec says we should do both at the same time, but
> > +		 * Ricoh controllers do not like that.
> > +		 */
> >  		sdhci_do_reset(host, SDHCI_RESET_CMD);
> >  		sdhci_do_reset(host, SDHCI_RESET_DATA);
> >  
> > @@ -3151,6 +3164,7 @@ static bool sdhci_request_done(struct sdhci_host *host)
> >  
> >  	return false;
> >  }
> > +EXPORT_SYMBOL_GPL(sdhci_request_done);
> >  
> >  static void sdhci_complete_work(struct work_struct *work)
> >  {
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index 6eeb74741da3..74572b54ec47 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -845,8 +845,12 @@ void __sdhci_external_dma_prepare_data(struct sdhci_host *host,
> >                                         struct mmc_command *cmd);
> >  void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
> >                                       struct mmc_command *cmd);
> > +struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
> > +                                            struct mmc_data *data);
> >  #endif
> >  bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq);
> > +bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq);
> > +void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq);
> >  void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
> >  void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
> >  void __sdhci_finish_data_common(struct sdhci_host *host);
> > @@ -878,6 +882,8 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
> >  int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
> >  				      struct mmc_ios *ios);
> >  void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
> > +void sdhci_request_done_dma(struct sdhci_host *host, struct mmc_request *mrq);
> > +bool sdhci_request_done(struct sdhci_host *host);
> >  void sdhci_adma_write_desc(struct sdhci_host *host, void **desc,
> >  			   dma_addr_t addr, int len, unsigned int cmd);
> >  
> > 
>