Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
To:     ohad@wizery.com, bjorn.andersson@linaro.org,
        mathieu.poirier@linaro.org, robh+dt@kernel.org, s-anna@ti.com,
        ssantosh@kernel.org
Cc:     grzegorz.jaszczyk@linaro.org, linux-remoteproc@vger.kernel.org,
        lee.jones@linaro.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, praneeth@ti.com,
        rogerq@ti.com
Subject: [PATCH 5/5] remoteproc: pru: Configure firmware based on client setup
Date:   Fri, 11 Dec 2020 15:29:33 +0100
Message-Id: <20201211142933.25784-6-grzegorz.jaszczyk@linaro.org>
In-Reply-To: <20201211142933.25784-1-grzegorz.jaszczyk@linaro.org>
References: <20201211142933.25784-1-grzegorz.jaszczyk@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Tero Kristo <t-kristo@ti.com>

Client device node property firmware-name is now used to configure
firmware for the PRU instances. The default firmware is also
restored once releasing the PRU resource.

Co-developed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
---
 drivers/remoteproc/pru_rproc.c | 35 ++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index ac13e4452a57..fed7a2051ebf 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -170,6 +170,23 @@ void pru_control_set_reg(struct pru_rproc *pru, unsigned int reg,
 	spin_unlock_irqrestore(&pru->rmw_lock, flags);
 }
 
+/**
+ * pru_rproc_set_firmware() - set firmware for a pru core
+ * @rproc: the rproc instance of the PRU
+ * @fw_name: the new firmware name, or NULL if default is desired
+ *
+ * Return: 0 on success, or errno in error case.
+ */
+static int pru_rproc_set_firmware(struct rproc *rproc, const char *fw_name)
+{
+	struct pru_rproc *pru = rproc->priv;
+
+	if (!fw_name)
+		fw_name = pru->fw_name;
+
+	return rproc_set_firmware(rproc, fw_name);
+}
+
 static struct rproc *__pru_rproc_get(struct device_node *np, int index)
 {
 	struct device_node *rproc_np = NULL;
@@ -230,6 +247,8 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
 	struct rproc *rproc;
 	struct pru_rproc *pru;
 	struct device *dev;
+	const char *fw_name;
+	int ret;
 
 	rproc = __pru_rproc_get(np, index);
 	if (IS_ERR(rproc))
@@ -254,7 +273,21 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
 	if (pru_id)
 		*pru_id = pru->id;
 
+	ret = of_property_read_string_index(np, "firmware-name", index,
+					    &fw_name);
+	if (!ret) {
+		ret = pru_rproc_set_firmware(rproc, fw_name);
+		if (ret) {
+			dev_err(dev, "failed to set firmware: %d\n", ret);
+			goto err;
+		}
+	}
+
 	return rproc;
+
+err:
+	pru_rproc_put(rproc);
+	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(pru_rproc_get);
 
@@ -276,6 +309,8 @@ void pru_rproc_put(struct rproc *rproc)
 	if (!pru->client_np)
 		return;
 
+	pru_rproc_set_firmware(rproc, NULL);
+
 	mutex_lock(&pru->lock);
 	pru->client_np = NULL;
 	rproc->deny_sysfs_ops = false;
-- 
2.29.0