Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: vbadigan=codeaurora.org@mg.codeaurora.org
DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org CB67CC433C6
Subject: Re: [PATCH v4 2/2] mmc: sdhci-msm: Actually set the actual clock
To:     Douglas Anderson <dianders@chromium.org>,
        Ulf Hansson <ulf.hansson@linaro.org>,
        Adrian Hunter <adrian.hunter@intel.com>
Cc:     Stephen Boyd <swboyd@chromium.org>,
        Taniya Das <tdas@codeaurora.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-mmc@vger.kernel.org
References: <20201211091150.v4.1.Iec3430c7d3c2a29262695edef7b82a14aaa567e5@changeid>
 <20201211091150.v4.2.I7564620993acd4baa63fa0e3925ca879a86d3ee3@changeid>
From:   Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Message-ID: <e817284c-1ae9-7d3f-5195-7313651ef9da@codeaurora.org>
Date:   Mon, 14 Dec 2020 18:13:51 +0530
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:78.0) Gecko/20100101
 Thunderbird/78.5.1
MIME-Version: 1.0
In-Reply-To: <20201211091150.v4.2.I7564620993acd4baa63fa0e3925ca879a86d3ee3@changeid>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Content-Language: en-US
Precedence: bulk


On 12/11/2020 10:42 PM, Douglas Anderson wrote:
> The MSM SDHCI driver always set the "actual_clock" field to 0.  It had
> a comment about it not being needed because we weren't using the
> standard SDHCI divider mechanism and we'd just fallback to
> "host->clock".  However, it's still better to provide the actual
> clock.  Why?
>
> 1. It will make timeout calculations slightly better.  On one system I
>     have, the eMMC requets 200 MHz (for HS400-ES) but actually gets 192
>     MHz.  These are close, but why not get the more accurate one.
>
> 2. If things are seriously off in the clock driver and it's missing
>     rates or picking the wrong rate (maybe it's rounding up instead of
>     down), this will make it much more obvious what's going on.
>
> NOTE: we have to be a little careful here because the "actual_clock"
> field shouldn't include the multiplier that sdhci-msm needs
> internally.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> Changes in v4:
> - ("mmc: sdhci-msm: Actually set the actual clock") new for v4.
>
>   drivers/mmc/host/sdhci-msm.c | 32 ++++++++++++++------------------
>   1 file changed, 14 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 50beb407dbe9..08a3960001ad 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -328,7 +328,7 @@ static void sdhci_msm_v5_variant_writel_relaxed(u32 val,
>   	writel_relaxed(val, host->ioaddr + offset);
>   }
>   
> -static unsigned int msm_get_clock_rate_for_bus_mode(struct sdhci_host *host,
> +static unsigned int msm_get_clock_mult_for_bus_mode(struct sdhci_host *host,
>   						    unsigned int clock)

nit: clock variable not being used anymore. We can drop it.

>   {
>   	struct mmc_ios ios = host->mmc->ios;
> @@ -342,8 +342,8 @@ static unsigned int msm_get_clock_rate_for_bus_mode(struct sdhci_host *host,
>   	    ios.timing == MMC_TIMING_MMC_DDR52 ||
>   	    ios.timing == MMC_TIMING_MMC_HS400 ||
>   	    host->flags & SDHCI_HS400_TUNING)
> -		clock *= 2;
> -	return clock;
> +		return 2;
> +	return 1;
>   }
>   
>   static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host,
> @@ -354,14 +354,16 @@ static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host,
>   	struct mmc_ios curr_ios = host->mmc->ios;
>   	struct clk *core_clk = msm_host->bulk_clks[0].clk;
>   	unsigned long achieved_rate;
> +	unsigned int desired_rate;
> +	unsigned int mult;
>   	int rc;
>   
> -	clock = msm_get_clock_rate_for_bus_mode(host, clock);
> -	rc = dev_pm_opp_set_rate(mmc_dev(host->mmc), clock);
> +	mult = msm_get_clock_mult_for_bus_mode(host, clock);
> +	desired_rate = clock * mult;
> +	rc = dev_pm_opp_set_rate(mmc_dev(host->mmc), desired_rate);
>   	if (rc) {
>   		pr_err("%s: Failed to set clock at rate %u at timing %d\n",
> -		       mmc_hostname(host->mmc), clock,
> -		       curr_ios.timing);
> +		       mmc_hostname(host->mmc), desired_rate, curr_ios.timing);
>   		return;
>   	}
>   
> @@ -371,11 +373,12 @@ static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host,
>   	 * encounter it.
>   	 */
>   	achieved_rate = clk_get_rate(core_clk);
> -	if (achieved_rate > clock)
> +	if (achieved_rate > desired_rate)
>   		pr_warn("%s: Card appears overclocked; req %u Hz, actual %lu Hz\n",
> -			mmc_hostname(host->mmc), clock, achieved_rate);
> +			mmc_hostname(host->mmc), desired_rate, achieved_rate);
> +	host->mmc->actual_clock = achieved_rate / mult;
>   
> -	msm_host->clk_rate = clock;
> +	msm_host->clk_rate = desired_rate;


Can you set msm_host->clk_rate also to achieved_rate?

At few places in this driver, host->clock is being used where 
achieved_rate should be used ideally.
I will replace those instances with 'msm_host->clk_rate' in a separate 
patch once this change merged.


>   	pr_debug("%s: Setting clock at rate %lu at timing %d\n",
>   		 mmc_hostname(host->mmc), achieved_rate, curr_ios.timing);
>   }
> @@ -1756,13 +1759,6 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
>   static void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
>   {
>   	u16 clk;
> -	/*
> -	 * Keep actual_clock as zero -
> -	 * - since there is no divider used so no need of having actual_clock.
> -	 * - MSM controller uses SDCLK for data timeout calculation. If
> -	 *   actual_clock is zero, host->clock is taken for calculation.
> -	 */
> -	host->mmc->actual_clock = 0;
>   
>   	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
>   
> @@ -1785,7 +1781,7 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
>   	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
>   
>   	if (!clock) {
> -		msm_host->clk_rate = clock;
> +		host->mmc->actual_clock = msm_host->clk_rate = 0;
>   		goto out;
>   	}
>