Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 4 Nov 2001 08:51:41 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 4 Nov 2001 08:51:33 -0500 Received: from ulima.unil.ch ([130.223.144.143]:29824 "HELO ulima.unil.ch") by vger.kernel.org with SMTP id ; Sun, 4 Nov 2001 08:51:19 -0500 Date: Sun, 4 Nov 2001 14:51:15 +0100 From: Gregoire Favre To: linux-kernel@vger.kernel.org Subject: Kernel panic: Loop 1 (aic7xxx under 2.4.13-ac[246]) Message-ID: <20011104145115.B19746@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=unknown-8bit Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.3.22.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, With 2.4.10-ac7 no problems at all, but with 2.4.13-ac[246] (not tested the other ones), compiled either with gcc-2.96 from Mandrake or gcc-3.02 also from Mandrake, on the first power on of my computer, ends so: scsi0:A:0:0: Tagged Queuing enabled. Depth 64 scsi1: brkadrint, Scratch or SCB Memory Parity Error at seqaddr = 0x1 scsi1: Dumping Card State while idle, at SEQADDR 0x1 ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0 HCNT = 0x0 SCSIEQ = 0x12, SBLKCTL = 0x0 DFCNTRL = 0x4, DFSTATUS = 0x6d LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80 SSTAT0 = 0x5, SSTAT1 = 0x0 STACK == 0x17, 0x186, 0x0, 0x0 SCB count =4 Kernel NEXTQSCB =2 Card NEXTQSCB =2 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Pending list: Kernel Free SCB list: 3 1 0 scsi1:0:1:0: Attempting to queue an ABORT message scsi1: Dumping Card State while idle, at SEQADDR 0x18 ACCUM = 0x0, SINDEX = 0x0, DINDEX = 0x0, ARG_2 = 0x0 HCNT = 0x0 SCSIEQ = 0x0, SBLKCTL = 0xc0 DFCNTRL = 0x0, DFSTATUS = 0x29 LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x0 SSTAT0 = 0x0, SSTAT1 = 0x8 STACK == 0x17, 0x0, 0x0, 0x0 SCB count = 4 Kernel NEXTQSCB = 3 Card NEXTQSCB = 0 QINFIFO entries: 3 2 Waiting Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255 Disconnected Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255 QOUTFIFO entries: Sequencer Free SCB list: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Pending list: 2 Kernel Free SCB list: 1 0 Untagged Q(1): 2 DevQ(0:1:0): 0 waiting qinpos =0, SCB index +3 Kernel panic: Loop 1 And if I reboot, no more problem: v 4 13:53:38 localhost syslogd 1.4-0: restart (remote reception). Nov 4 13:53:38 localhost kernel: klogd 1.4-0, log source = /proc/kmsg started. Nov 4 13:53:38 localhost kernel: Inspecting /boot/System.map-2.4.13-ac6 Nov 4 13:53:39 localhost random: Initializing random number generator: succeeded Nov 4 13:53:39 localhost kernel: Loaded 16503 symbols from /boot/System.map-2.4.13-ac6. Nov 4 13:53:39 localhost kernel: Symbols match kernel version 2.4.13. Nov 4 13:53:39 localhost kernel: Loaded 6 symbols from 1 module. Nov 4 13:53:39 localhost kernel: Linux version 2.4.13-ac6 (greg@localhost.localdomain) (gcc version 3.0.2) #1 Fri Nov 2 20:42:36 CET 2001 Nov 4 13:53:39 localhost kernel: BIOS-provided physical RAM map: Nov 4 13:53:39 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Nov 4 13:53:39 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Nov 4 13:53:39 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Nov 4 13:53:39 localhost kernel: BIOS-e820: 0000000000100000 - 000000001fffd000 (usable) Nov 4 13:53:39 localhost kernel: BIOS-e820: 000000001fffd000 - 000000001ffff000 (ACPI data) Nov 4 13:53:39 localhost kernel: BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) Nov 4 13:53:39 localhost kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Nov 4 13:53:39 localhost kernel: On node 0 totalpages: 131069 Nov 4 13:53:39 localhost kernel: zone(0): 4096 pages. Nov 4 13:53:39 localhost kernel: zone(1): 126973 pages. Nov 4 13:53:39 localhost kernel: zone(2): 0 pages. Nov 4 13:53:39 localhost kernel: Local APIC disabled by BIOS -- reenabling. Nov 4 13:53:39 localhost kernel: Found and enabled local APIC! Nov 4 13:53:39 localhost kernel: Kernel command line: BOOT_IMAGE=2.4.13-ac6 root=306 video=matrox:1280x1024-16@85 Nov 4 13:53:39 localhost kernel: Initializing CPU#0 Nov 4 13:53:39 localhost kernel: Detected 451.031 MHz processor. Nov 4 13:53:39 localhost kernel: Console: colour VGA+ 80x25 Nov 4 13:53:39 localhost kernel: Calibrating delay loop... 897.84 BogoMIPS Nov 4 13:53:39 localhost kernel: Memory: 513312k/524276k available (1481k kernel code, 10576k reserved, 374k data, 232k init, 0k highmem) Nov 4 13:53:39 localhost kernel: Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Nov 4 13:53:39 localhost kernel: Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Nov 4 13:53:39 localhost kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Nov 4 13:53:39 localhost kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Nov 4 13:53:39 localhost kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Nov 4 13:53:39 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Nov 4 13:53:39 localhost kernel: CPU: L2 cache: 512K Nov 4 13:53:39 localhost kernel: Intel machine check architecture supported. Nov 4 13:53:39 localhost kernel: Intel machine check reporting enabled on CPU#0. Nov 4 13:53:39 localhost kernel: CPU: Intel Pentium III (Katmai) stepping 02 Nov 4 13:53:39 localhost kernel: Enabling fast FPU save and restore... done. Nov 4 13:53:39 localhost kernel: Enabling unmasked SIMD FPU exception support... done. Nov 4 13:53:39 localhost kernel: Checking 'hlt' instruction... OK. Nov 4 13:53:39 localhost kernel: POSIX conformance testing by UNIFIX Nov 4 13:53:39 localhost kernel: enabled ExtINT on CPU#0 Nov 4 13:53:39 localhost kernel: ESR value before enabling vector: 00000040 Nov 4 13:53:39 localhost kernel: ESR value after enabling vector: 00000000 Nov 4 13:53:39 localhost kernel: Using local APIC timer interrupts. Nov 4 13:53:39 localhost kernel: calibrating APIC timer ... Nov 4 13:53:39 localhost kernel: ..... CPU clock speed is 451.0216 MHz. Nov 4 13:53:39 localhost kernel: ..... host bus clock speed is 100.2268 MHz. Nov 4 13:53:39 localhost kernel: cpu: 0, clocks: 1002268, slice: 501134 Nov 4 13:53:39 localhost kernel: CPU0 Nov 4 13:53:39 localhost kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Nov 4 13:53:39 localhost kernel: mtrr: detected mtrr type: Intel Nov 4 13:53:39 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1 Nov 4 13:53:39 localhost kernel: PCI: Using configuration type 1 Nov 4 13:53:39 localhost kernel: PCI: Probing PCI hardware Nov 4 13:53:39 localhost kernel: Unknown bridge resource 0: assuming transparent Nov 4 13:53:39 localhost kernel: PCI: Using IRQ router PIIX [8086/7110] at 00:04.0 Nov 4 13:53:39 localhost kernel: Limiting direct PCI/PCI transfers. Nov 4 13:53:39 localhost kernel: Linux NET4.0 for Linux 2.4 Nov 4 13:53:39 localhost kernel: Based upon Swansea University Computer Society NET3.039 Nov 4 13:53:39 localhost kernel: Initializing RT netlink socket Nov 4 13:53:39 localhost kernel: SBF: Simple Boot Flag extension found and enabled. Nov 4 13:53:39 localhost kernel: SBF: Setting boot flags 0x1 Nov 4 13:53:39 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15) Nov 4 13:53:39 localhost kernel: Starting kswapd v1.8 Nov 4 13:53:39 localhost kernel: Journalled Block Device driver loaded Nov 4 13:53:39 localhost kernel: NTFS driver v1.1.20 [Flags: R/O] Nov 4 13:53:39 localhost kernel: udf: registering filesystem Nov 4 13:53:39 localhost kernel: i2c-core.o: i2c core module Nov 4 13:53:39 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module Nov 4 13:53:39 localhost kernel: matroxfb: Matrox Millennium G400 MAX (AGP) detected Nov 4 13:53:39 localhost kernel: matroxfb: MTRR's turned on Nov 4 13:53:39 localhost kernel: matroxfb: 1280x1024x16bpp (virtual: 1280x6552) Nov 4 13:53:39 localhost kernel: matroxfb: framebuffer at 0xE4000000, mapped to 0xe0812000, size 33554432 Nov 4 13:53:39 localhost kernel: Console: switching to colour frame buffer device 160x64 Nov 4 13:53:39 localhost kernel: fb0: MATROX VGA frame buffer device Nov 4 13:53:39 localhost kernel: pty: 256 Unix98 ptys configured Nov 4 13:53:39 localhost kernel: Real Time Clock Driver v1.10e Nov 4 13:53:39 localhost kernel: block: queued sectors max/low 341008kB/209936kB, 1024 slots per queue Nov 4 13:53:39 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 Nov 4 13:53:39 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Nov 4 13:53:39 localhost kernel: PIIX4: IDE controller on PCI bus 00 dev 21 Nov 4 13:53:39 localhost kernel: PIIX4: chipset revision 1 Nov 4 13:53:39 localhost kernel: PIIX4: not 100%% native mode: will probe irqs later Nov 4 13:53:39 localhost kernel: hda: IBM-DTTA-371440, ATA DISK drive Nov 4 13:53:39 localhost kernel: hdc: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive Nov 4 13:53:39 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Nov 4 13:53:39 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 Nov 4 13:53:39 localhost kernel: hda: 28229040 sectors (14453 MB) w/462KiB Cache, CHS=1757/255/63 Nov 4 13:53:39 localhost kernel: ide-floppy driver 0.97.sv Nov 4 13:53:39 localhost kernel: hdc: 244766kB, 489532 blocks, 512 sector size Nov 4 13:53:39 localhost kernel: hdc: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm Nov 4 13:53:39 localhost kernel: hdc: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664 Nov 4 13:53:39 localhost kernel: Partition check: Nov 4 13:53:39 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 > Nov 4 13:53:39 localhost kernel: hdc: unknown partition table Nov 4 13:53:39 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html Nov 4 13:53:39 localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others Nov 4 13:53:39 localhost kernel: PCI: Found IRQ 10 for device 00:07.0 Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 10 with 00:0a.0 Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 10 with 00:0a.1 Nov 4 13:53:39 localhost kernel: eth0: Intel Corporation 82557 [Ethernet Pro 100], 00:E0:18:90:14:C5, IRQ 10. Nov 4 13:53:39 localhost kernel: Receiver lock-up bug exists -- enabling work-around. Nov 4 13:53:39 localhost kernel: Board assembly 668081-002, Physical connectors present: RJ45 Nov 4 13:53:39 localhost kernel: Primary interface chip i82555 PHY #1. Nov 4 13:53:39 localhost kernel: General self-test: passed. Nov 4 13:53:39 localhost kernel: Serial sub-system self-test: passed. Nov 4 13:53:39 localhost kernel: Internal registers self-test: passed. Nov 4 13:53:39 localhost kernel: ROM checksum self-test: passed (0x24c9f043). Nov 4 13:53:39 localhost kernel: Receiver lock-up workaround activated. Nov 4 13:53:39 localhost kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann Nov 4 13:53:39 localhost kernel: agpgart: Maximum main memory to use for agp memory: 439M Nov 4 13:53:39 localhost kernel: agpgart: Detected Intel 440BX chipset Nov 4 13:53:39 localhost kernel: agpgart: AGP aperture is 32M @ 0xe6000000 Nov 4 13:53:39 localhost kernel: [drm] AGP 0.99 on Intel 440BX @ 0xe6000000 32MB Nov 4 13:53:39 localhost kernel: [drm] Initialized mga 3.0.2 20010321 on minor 0 Nov 4 13:53:39 localhost kernel: ide-floppy driver 0.97.sv Nov 4 13:53:39 localhost kernel: SCSI subsystem driver Revision: 1.00 Nov 4 13:53:39 localhost kernel: PCI: Found IRQ 5 for device 00:06.0 Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 5 with 00:04.2 Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 5 with 00:09.0 Nov 4 13:53:39 localhost kernel: PCI: Found IRQ 11 for device 00:0b.0 Nov 4 13:53:39 localhost kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 Nov 4 13:53:39 localhost kernel: Nov 4 13:53:39 localhost kernel: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs Nov 4 13:53:39 localhost kernel: Nov 4 13:53:39 localhost kernel: scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 Nov 4 13:53:39 localhost kernel: Nov 4 13:53:39 localhost kernel: aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs Nov 4 13:53:39 localhost kernel: Nov 4 13:53:39 localhost kernel: Vendor: IBM Model: DDRS-39130D Rev: DC1B Nov 4 13:53:39 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Nov 4 13:53:39 localhost kernel: Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04 Nov 4 13:53:39 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02 Nov 4 13:53:39 localhost kernel: Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.07 Nov 4 13:53:39 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02 Nov 4 13:53:39 localhost kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 64 Nov 4 13:53:39 localhost kernel: (scsi1:A:2): 10.000MB/s transfers (10.000MHz, offset 15) Nov 4 13:53:39 localhost kernel: Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05 Nov 4 13:53:39 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02 Nov 4 13:53:39 localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Nov 4 13:53:39 localhost kernel: (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit) Nov 4 13:53:39 localhost kernel: SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB) Nov 4 13:53:39 localhost kernel: sda: sda1 sda2 Nov 4 13:53:39 localhost kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 Nov 4 13:53:39 localhost kernel: Attached scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0 Nov 4 13:53:39 localhost kernel: Attached scsi CD-ROM sr2 at scsi1, channel 0, id 2, lun 0 Nov 4 13:53:39 localhost kernel: (scsi0:A:1): 20.000MB/s transfers (20.000MHz, offset 16) Nov 4 13:53:39 localhost kernel: sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Nov 4 13:53:39 localhost kernel: Uniform CD-ROM driver Revision: 3.12 Nov 4 13:53:39 localhost kernel: (scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 8) Nov 4 13:53:39 localhost kernel: sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray Nov 4 13:53:39 localhost kernel: sr2: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Nov 4 13:53:39 localhost kernel: usb.c: registered new driver usbdevfs Nov 4 13:53:39 localhost kernel: usb.c: registered new driver hub Nov 4 13:53:39 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Nov 4 13:53:39 localhost kernel: IP Protocols: ICMP, UDP, TCP Nov 4 13:53:39 localhost kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes Nov 4 13:53:39 localhost kernel: TCP: Hash tables configured (established 32768 bind 65536) Nov 4 13:53:39 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Nov 4 13:53:39 localhost kernel: kjournald starting. Commit interval 5 seconds Nov 4 13:53:39 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Nov 4 13:53:39 localhost kernel: VFS: Mounted root (ext3 filesystem) readonly. Nov 4 13:53:39 localhost kernel: Freeing unused kernel memory: 232k freed Nov 4 13:53:39 localhost kernel: Adding Swap: 136512k swap-space (priority -1) Nov 4 13:53:39 localhost kernel: Adding Swap: 130748k swap-space (priority -2) Nov 4 13:53:39 localhost kernel: EXT3 FS 2.4-0.9.13, 21 Oct 2001 on ide0(3,6), internal journal Nov 4 13:53:39 localhost kernel: hdc: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664 Nov 4 13:53:39 localhost kernel: hdc: unknown partition table Nov 4 13:53:39 localhost kernel: reiserfs: checking transaction log (device 08:02) ... Nov 4 13:53:39 localhost kernel: Using r5 hash to sort names Nov 4 13:53:39 localhost kernel: ReiserFS version 3.6.25 Nov 4 13:53:39 localhost kernel: kjournald starting. Commit interval 5 seconds Nov 4 13:53:39 localhost kernel: EXT3 FS 2.4-0.9.13, 21 Oct 2001 on ide0(3,3), internal journal Nov 4 13:53:39 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Nov 4 13:53:39 localhost kernel: hdc: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664 Nov 4 13:53:39 localhost kernel: hdc: unknown partition table Nov 4 13:53:39 localhost kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 Nov 4 13:53:39 localhost kernel: PCI: Found IRQ 5 for device 00:04.2 Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 5 with 00:06.0 Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 5 with 00:09.0 Nov 4 13:53:39 localhost kernel: uhci.c: USB UHCI at I/O 0xd400, IRQ 5 Nov 4 13:53:39 localhost kernel: usb.c: new USB bus registered, assigned bus number 1 Nov 4 13:53:39 localhost kernel: hub.c: USB hub found Nov 4 13:53:39 localhost kernel: hub.c: 2 ports detected ... lspci -v gives: 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 02) Flags: bus master, medium devsel, latency 64 Memory at e6000000 (32-bit, prefetchable) [size=32M] Capabilities: [a0] AGP version 1.0 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: e0000000-e16fffff Prefetchable memory behind bridge: e3f00000-e5ffffff 00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 32 I/O ports at d800 [size=16] 00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at d400 [size=32] 00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) Flags: medium devsel, IRQ 9 00:06.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890 Subsystem: Adaptec 2940U2W SCSI Controller Flags: bus master, medium devsel, latency 32, IRQ 5 BIST result: 00 I/O ports at d000 [disabled] [size=256] Memory at df800000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at [disabled] [size=128K] Capabilities: [dc] Power Management version 1 00:07.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05) Subsystem: Intel Corporation 82558 10/100 with Wake on LAN Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at e3000000 (32-bit, prefetchable) [size=4K] I/O ports at b800 [size=32] Memory at df000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] [size=1M] Capabilities: [dc] Power Management version 1 00:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH: Unknown device 0000 Flags: bus master, medium devsel, latency 32, IRQ 5 Memory at de800000 (32-bit, non-prefetchable) [size=512] 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) Subsystem: Hauppauge computer works Inc.: Unknown device 13eb Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at e2000000 (32-bit, prefetchable) [size=4K] 00:0a.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02) Subsystem: Hauppauge computer works Inc.: Unknown device 13eb Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at e1800000 (32-bit, prefetchable) [size=4K] 00:0b.0 SCSI storage controller: Adaptec AHA-294x / AIC-7871 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at b400 [disabled] [size=256] Memory at de000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at [disabled] [size=32K] 00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 06) Subsystem: Creative Labs CT4832 SBLive! Value Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at b000 [size=32] Capabilities: [dc] Power Management version 1 00:0c.1 Input device controller: Creative Labs SB Live! (rev 06) Subsystem: Creative Labs Gameport Joystick Flags: bus master, medium devsel, latency 32 I/O ports at a800 [size=8] Capabilities: [dc] Power Management version 1 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb Flags: bus master, medium devsel, latency 64, IRQ 9 Memory at e4000000 (32-bit, prefetchable) [size=32M] Memory at e0800000 (32-bit, non-prefetchable) [size=16K] Memory at e0000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at e3ff0000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Capabilities: [f0] AGP version 2.0 I don't know if I should say anything more? Please CC to me as I am not on the mailing list, thanks you very much, Gr?goire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/