Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To:     srinivas.kandagatla@linaro.org,
        Saenz Julienne <nsaenzjulienne@suse.de>,
        devicetree@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com,
        linux-rpi-kernel@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org,
        Rob Herring <robh+dt@kernel.org>
Cc:     linux-kernel@vger.kernel.org, linux@armlinux.org.uk,
        catalin.marinas@arm.com, will@kernel.org,
        tim.gover@raspberrypi.com, phil@raspberrypi.com
Subject: [PATCH 3/6] ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration
Date:   Tue, 15 Dec 2020 16:56:23 +0100
Message-Id: <20201215155627.2513-4-nsaenzjulienne@suse.de>
In-Reply-To: <20201215155627.2513-1-nsaenzjulienne@suse.de>
References: <20201215155627.2513-1-nsaenzjulienne@suse.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

RPi4's co-processor will copy the board's bootloader configuration into
memory for the OS to consume. Introduce a reserved-memory area template
for the co-processor to edit before booting the system so as for Linux
not to overwrite that memory.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 403bacf986eb..c58e58e8ce39 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -25,6 +25,7 @@ aliases {
 		emmc2bus = &emmc2bus;
 		ethernet0 = &genet;
 		pcie0 = &pcie0;
+		eeprom = &eeprom;
 	};
 
 	leds {
@@ -218,6 +219,19 @@ &pwm1 {
 	status = "okay";
 };
 
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	eeprom: eeprom@0 {
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
 /* SDHCI is used to control the SDIO for wireless */
 &sdhci {
 	#address-cells = <1>;
-- 
2.29.2