Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750989AbWIDNwA (ORCPT ); Mon, 4 Sep 2006 09:52:00 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750873AbWIDNwA (ORCPT ); Mon, 4 Sep 2006 09:52:00 -0400 Received: from imf19aec.mail.bellsouth.net ([205.152.59.67]:40547 "EHLO imf19aec.mail.bellsouth.net") by vger.kernel.org with ESMTP id S1750985AbWIDNv6 (ORCPT ); Mon, 4 Sep 2006 09:51:58 -0400 Message-ID: <44FC2F7C.6040301@bellsouth.net> Date: Mon, 04 Sep 2006 08:51:56 -0500 From: Jay Cliburn User-Agent: Thunderbird 1.5.0.5 (X11/20060803) MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: 2.6.18-rc5-mm1 unusual IRQ number for VIA device Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3833 Lines: 78 Running 2.6.18-rc5.mm1 on an Asus M2V mainboard with dual-core Athlon cpu, the onboard audio device gets assigned and IRQ of 8410. Under 2.6.18-rc4-mm3, the same device gets assigned IRQ 17. Is this a way to get around this? /proc/interrupts: CPU0 CPU1 0: 525177 0 IO-APIC-edge timer 1: 3016 0 IO-APIC-edge i8042 6: 5 0 IO-APIC-edge floppy 7: 0 0 IO-APIC-edge parport0 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 4 0 IO-APIC-edge i8042 14: 18433 0 IO-APIC-edge ide0 20: 16017 0 IO-APIC-fasteoi uhci_hcd:usb1 21: 66080 0 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb5, libata 22: 0 0 IO-APIC-fasteoi uhci_hcd:usb2 23: 0 0 IO-APIC-fasteoi uhci_hcd:usb4 36: 4600 0 IO-APIC-fasteoi eth0 8410: 193 0 PCI-MSI- HDA Intel NMI: 180 91 LOC: 525078 525029 ERR: 0 And here's the lspci output for the audio device: 08:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10) Subsystem: ASUSTeK Computer Inc. Unknown device 81e7 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-