Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Sun, 20 Dec 2020 10:05:55 +0200
From:   Vladimir Oltean <olteanv@gmail.com>
To:     Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc:     "David S . Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>, netdev@vger.kernel.org,
        Zhao Qiang <qiang.zhao@nxp.com>, Li Yang <leoyang.li@nxp.com>,
        Andrew Lunn <andrew@lunn.ch>, linux-kernel@vger.kernel.org,
        Vladimir Oltean <vladimir.oltean@nxp.com>
Subject: Re: [PATCH net v2 1/3] ethernet: ucc_geth: set dev->max_mtu to 1518
Message-ID: <20201220080555.tgv3ndlkhzbvcpx7@skbuf>
References: <20201218105538.30563-1-rasmus.villemoes@prevas.dk>
 <20201218105538.30563-2-rasmus.villemoes@prevas.dk>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20201218105538.30563-2-rasmus.villemoes@prevas.dk>
Precedence: bulk

On Fri, Dec 18, 2020 at 11:55:36AM +0100, Rasmus Villemoes wrote:
> All the buffers and registers are already set up appropriately for an
> MTU slightly above 1500, so we just need to expose this to the
> networking stack. AFAICT, there's no need to implement .ndo_change_mtu
> when the receive buffers are always set up to support the max_mtu.
> 
> This fixes several warnings during boot on our mpc8309-board with an
> embedded mv88e6250 switch:
> 
> mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0
> ...
> mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4
> ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead
> 
> The last line explains what the DSA stack tries to do: achieving an MTU
> of 1500 on-the-wire requires that the master netdevice connected to
> the CPU port supports an MTU of 1500+the tagging overhead.
> 
> Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
> Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>