Received: by 2002:a05:6a10:f347:0:0:0:0 with SMTP id d7csp5162417pxu; Tue, 22 Dec 2020 09:45:12 -0800 (PST) X-Google-Smtp-Source: ABdhPJwV+wzA3V846lVV7Ubk5IgNABeNng4kCAcoIXUuYY+YHME21nGwy8OwendwDlOhlw79i+qZ X-Received: by 2002:a17:906:c2ca:: with SMTP id ch10mr14182623ejb.157.1608659112526; Tue, 22 Dec 2020 09:45:12 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1608659112; cv=none; d=google.com; s=arc-20160816; b=floRV5g/aH3EK/M4mYow1qHeL5uUXdWfqRlPBXaKK//n1vXtK5M2YWCcIKJmzpN3lW 33iHTJuF6MmYt5Hic1VGVodL+oQIDyHmAb2uKCP3eNt3cQzBDCvNGHi+XDFyvacL8EBj 0uVIDgQ+solKTINWvsqnqFXemY2FBNY3CaJPHZybQOksfs5sTc3FQrOSfOPD9rVYwgxt weavZDktemRO8kIwl+KPL3c1snw1Lbkn1jt3nWH7VHtJI1fopcULPTfSswtUBiIGFZyw hM+tUphFXxdE2T01rpJ2hq3dWKgyHZuEHg5z6V8DDGuwPG0iXRrXljK/Lqq5rCpJqJ6U MNJA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:organization:references:in-reply-to :message-id:subject:cc:to:from:date; bh=v5wd46BYV7z9myON2OhgLAO3V7UG/71qnh7zlwSdlQM=; b=uO2dvx6fQkwfq98hxmoR3rJEuYoxD9CCFNDsDgKD3kp+stkiU398/nKPr8IW/7SPp3 ZqiATkdtI800Hd9L6MH+CEhOXTVZ/R8b+346d/rgg25MJbtw66sSbXTxHowt60UsWxbj rxmsEcYkwa0j6MAlgN2pKYzatU/zLnVlDDbuUm8AvgVtDHdlrLUX1SH0WaLaHjx7Kyku zxIemdppRBZUwJoy8C0t9tHu/7H+WOOwLT0pv++dE++jqSk4kgsN/g63byRW76lBIpog +lceZOxJcVO9MgcOWbrh+ULWK1KDiLHKY9yCfFgRZuqVASUbmUh3uPWZJgxRtcLp/n2K MoPw== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id s11si12233190edw.280.2020.12.22.09.44.50; Tue, 22 Dec 2020 09:45:12 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727432AbgLVRnd (ORCPT + 99 others); Tue, 22 Dec 2020 12:43:33 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41316 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726889AbgLVRnc (ORCPT ); Tue, 22 Dec 2020 12:43:32 -0500 Received: from mail-out.m-online.net (mail-out.m-online.net [IPv6:2001:a60:0:28:0:1:25:1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 356C8C0613D6; Tue, 22 Dec 2020 09:42:52 -0800 (PST) Received: from frontend01.mail.m-online.net (unknown [192.168.8.182]) by mail-out.m-online.net (Postfix) with ESMTP id 4D0kFR0BpQz1s1KJ; Tue, 22 Dec 2020 18:42:51 +0100 (CET) Received: from localhost (dynscan1.mnet-online.de [192.168.6.70]) by mail.m-online.net (Postfix) with ESMTP id 4D0kFQ60Qsz1tSQV; Tue, 22 Dec 2020 18:42:50 +0100 (CET) X-Virus-Scanned: amavisd-new at mnet-online.de Received: from mail.mnet-online.de ([192.168.8.182]) by localhost (dynscan1.mail.m-online.net [192.168.6.70]) (amavisd-new, port 10024) with ESMTP id 5MH4ge1mi0Ri; Tue, 22 Dec 2020 18:42:48 +0100 (CET) X-Auth-Info: 7DsCkGSKO1Lcwkx1bMVcPZ/VBMyUaUGXcuhKawToJn8= Received: from jawa (89-64-25-12.dynamic.chello.pl [89.64.25.12]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.mnet-online.de (Postfix) with ESMTPSA; Tue, 22 Dec 2020 18:42:48 +0100 (CET) Date: Tue, 22 Dec 2020 18:42:48 +0100 From: Lukasz Majewski To: Rob Herring , Shawn Guo , Fabio Estevam Cc: Sascha Hauer , Pengutronix Kernel Team , NXP Linux Team , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 3/3] ARM: dts: imx28: Add DTS description of imx28 based XEA board Message-ID: <20201222184248.1d79c2a3@jawa> In-Reply-To: <20201209231141.377af967@jawa> References: <20201125161815.2361-1-lukma@denx.de> <20201125161815.2361-3-lukma@denx.de> <20201209231141.377af967@jawa> Organization: denx.de X-Mailer: Claws Mail 3.17.8 (GTK+ 2.24.32; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha512; boundary="Sig_/V7FuaNgqB+vX/Npg4EOHPPf"; protocol="application/pgp-signature" Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org --Sig_/V7FuaNgqB+vX/Npg4EOHPPf Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Hi Shawn, > Dear Community, >=20 > > This patch adds DTS definition of the imx278 based XEA board. > >=20 > > Signed-off-by: Lukasz Majewski > > --- > > arch/arm/boot/dts/Makefile | 3 +- > > arch/arm/boot/dts/imx28-lwe.dtsi | 185 > > +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx28-xea.dts | > > 99 +++++++++++++++++ 3 files changed, 286 insertions(+), 1 > > deletion(-) create mode 100644 arch/arm/boot/dts/imx28-lwe.dtsi > > create mode 100644 arch/arm/boot/dts/imx28-xea.dts > >=20 > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index 4572db3fa5ae..c7c95ddc648b 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -702,7 +702,8 @@ dtb-$(CONFIG_ARCH_MXS) +=3D \ > > imx28-m28evk.dtb \ > > imx28-sps1.dtb \ > > imx28-ts4600.dtb \ > > - imx28-tx28.dtb > > + imx28-tx28.dtb \ > > + imx28-xea.dtb > > dtb-$(CONFIG_ARCH_NOMADIK) +=3D \ > > ste-nomadik-s8815.dtb \ > > ste-nomadik-nhk15.dtb > > diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi > > b/arch/arm/boot/dts/imx28-lwe.dtsi new file mode 100644 > > index 000000000000..cb2eb4377d9c > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx28-lwe.dtsi > > @@ -0,0 +1,185 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > > +/* > > + * Copyright 2020 > > + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de > > + */ > > + > > +/dts-v1/; > > +#include "imx28.dtsi" > > + > > +/ { > > + compatible =3D "fsl,imx28"; > > + > > + aliases { > > + spi2 =3D &ssp3; > > + }; > > + > > + chosen { > > + bootargs =3D "root=3D/dev/mmcblk0p2 rootfstype=3Dext4 ro > > rootwait console=3DttyAMA0,115200 panic=3D1"; > > + }; > > + > > + memory { > > + reg =3D <0x40000000 0x08000000>; > > + }; > > + > > + regulators { > > + compatible =3D "simple-bus"; > > + #address-cells =3D <1>; > > + #size-cells =3D <0>; > > + > > + reg_3v3: regulator@0 { > > + compatible =3D "regulator-fixed"; > > + reg =3D <0>; > > + regulator-name =3D "3V3"; > > + regulator-min-microvolt =3D <3300000>; > > + regulator-max-microvolt =3D <3300000>; > > + regulator-always-on; > > + }; > > + > > + reg_usb_5v: regulator@1 { > > + compatible =3D "regulator-fixed"; > > + reg =3D <1>; > > + regulator-name =3D "usb_vbus"; > > + regulator-min-microvolt =3D <5000000>; > > + regulator-max-microvolt =3D <5000000>; > > + enable-active-high; > > + }; > > + > > + reg_fec_3v3: regulator@2 { > > + compatible =3D "regulator-fixed"; > > + reg =3D <2>; > > + regulator-name =3D "fec-phy"; > > + regulator-min-microvolt =3D <3300000>; > > + regulator-max-microvolt =3D <3300000>; > > + enable-active-high; > > + regulator-boot-on; > > + }; > > + }; > > +}; > > + > > +&duart { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&duart_pins_a>; > > + status =3D "okay"; > > +}; > > + > > +&i2c0 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&i2c0_pins_a>; > > + status =3D "okay"; > > +}; > > + > > +&saif0 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&saif0_pins_a>; > > + #sound-dai-cells =3D <0>; > > + assigned-clocks =3D <&clks 53>; > > + assigned-clock-rates =3D <12000000>; > > + status =3D "okay"; > > +}; > > + > > +&saif1 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&saif1_pins_a>; > > + fsl,saif-master =3D <&saif0>; > > + #sound-dai-cells =3D <0>; > > + status =3D "okay"; > > +}; > > + > > +&spi3_pins_a { > > + fsl,pinmux-ids =3D < > > + MX28_PAD_AUART2_RX__SSP3_D4 > > + MX28_PAD_AUART2_TX__SSP3_D5 > > + MX28_PAD_SSP3_SCK__SSP3_SCK > > + MX28_PAD_SSP3_MOSI__SSP3_CMD > > + MX28_PAD_SSP3_MISO__SSP3_D0 > > + MX28_PAD_SSP3_SS0__SSP3_D3 > > + MX28_PAD_AUART2_TX__GPIO_3_9 > > + >; > > +}; > > + > > +&ssp3 { > > + compatible =3D "fsl,imx28-spi"; > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&spi3_pins_a>; > > + status =3D "okay"; > > + > > + flash0: s25fl256s0@0 { > > + compatible =3D "s25fl256s1", "jedec,spi-nor"; > > + spi-max-frequency =3D <40000000>; > > + reg =3D <0>; > > + > > + partitions { > > + compatible =3D "fixed-partitions"; > > + #address-cells =3D <1>; > > + #size-cells =3D <1>; > > + > > + partition@0 { > > + label =3D "u-boot"; > > + reg =3D <0 0x80000>; > > + read-only; > > + }; > > + > > + partition@80000 { > > + label =3D "env0"; > > + reg =3D <0x80000 0x10000>; > > + }; > > + > > + partition@90000 { > > + label =3D "env1"; > > + reg =3D <0x90000 0x10000>; > > + }; > > + > > + partition@100000 { > > + label =3D "kernel"; > > + reg =3D <0x100000 0x400000>; > > + }; > > + > > + partition@500000 { > > + label =3D "swupdate"; > > + reg =3D <0x500000 0x800000>; > > + }; > > + }; > > + }; > > +}; > > + > > +&ssp2 { > > + compatible =3D "fsl,imx28-spi"; > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&spi2_pins_a>; > > + status =3D "okay"; > > +}; > > + > > +&ssp0 { > > + compatible =3D "fsl,imx28-mmc"; > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&mmc0_8bit_pins_a>; > > + bus-width =3D <8>; > > + vmmc-supply =3D <®_3v3>; > > + non-removable; > > + status =3D "okay"; > > +}; > > + > > +&usb0 { > > + vbus-supply =3D <®_usb_5v>; > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&usb0_pins_b>, <&usb0_id_pins_a>; > > + dr_mode =3D "host"; > > + status =3D "okay"; > > +}; > > + > > +&usbphy0 { > > + status =3D "okay"; > > +}; > > + > > +&usb1 { > > + vbus-supply =3D <®_usb_5v>; > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&usb1_pins_b>; > > + dr_mode =3D "host"; > > + status =3D "okay"; > > +}; > > + > > +&usbphy1 { > > + status =3D "okay"; > > +}; > > diff --git a/arch/arm/boot/dts/imx28-xea.dts > > b/arch/arm/boot/dts/imx28-xea.dts new file mode 100644 > > index 000000000000..672080485b78 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx28-xea.dts > > @@ -0,0 +1,99 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > > +/* > > + * Copyright 2020 > > + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de > > + */ > > + > > +/dts-v1/; > > +#include "imx28-lwe.dtsi" > > + > > +/ { > > + model =3D "XEA"; > > +}; > > + > > +&can0 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&can1_pins_a>; > > + status =3D "okay"; > > +}; > > + > > +&i2c1 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&i2c1_pins_b>; > > + status =3D "okay"; > > +}; > > + > > +&pinctrl { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&hog_pins_a &hog_pins_tiva>; > > + > > + hog_pins_a: hog@0 { > > + reg =3D <0>; > > + fsl,pinmux-ids =3D < > > + MX28_PAD_GPMI_D00__GPIO_0_0 > > + MX28_PAD_GPMI_D02__GPIO_0_2 > > + MX28_PAD_GPMI_D05__GPIO_0_5 > > + MX28_PAD_GPMI_CE1N__GPIO_0_17 > > + MX28_PAD_GPMI_RDY0__GPIO_0_20 > > + MX28_PAD_GPMI_RDY1__GPIO_0_21 > > + MX28_PAD_GPMI_RDY2__GPIO_0_22 > > + MX28_PAD_GPMI_RDN__GPIO_0_24 > > + MX28_PAD_GPMI_CLE__GPIO_0_27 > > + MX28_PAD_LCD_VSYNC__GPIO_1_28 > > + MX28_PAD_SSP1_SCK__GPIO_2_12 > > + MX28_PAD_SSP1_CMD__GPIO_2_13 > > + MX28_PAD_SSP2_SS1__GPIO_2_20 > > + MX28_PAD_SSP2_SS2__GPIO_2_21 > > + MX28_PAD_LCD_D00__GPIO_1_0 > > + MX28_PAD_LCD_D01__GPIO_1_1 > > + MX28_PAD_LCD_D02__GPIO_1_2 > > + MX28_PAD_LCD_D03__GPIO_1_3 > > + MX28_PAD_LCD_D04__GPIO_1_4 > > + MX28_PAD_LCD_D05__GPIO_1_5 > > + MX28_PAD_LCD_D06__GPIO_1_6 > > + >; > > + fsl,drive-strength =3D ; > > + fsl,voltage =3D ; > > + fsl,pull-up =3D ; > > + }; > > + > > + hog_pins_tiva: hog@1 { > > + reg =3D <1>; > > + fsl,pinmux-ids =3D < > > + MX28_PAD_GPMI_RDY3__GPIO_0_23 > > + MX28_PAD_GPMI_WRN__GPIO_0_25 > > + >; > > + fsl,voltage =3D ; > > + fsl,pull-up =3D ; > > + }; > > + > > + hog_pins_coding: hog@2 { > > + reg =3D <2>; > > + fsl,pinmux-ids =3D < > > + MX28_PAD_GPMI_D01__GPIO_0_1 > > + MX28_PAD_GPMI_D03__GPIO_0_3 > > + MX28_PAD_GPMI_D04__GPIO_0_4 > > + MX28_PAD_GPMI_D06__GPIO_0_6 > > + MX28_PAD_GPMI_D07__GPIO_0_7 > > + >; > > + fsl,voltage =3D ; > > + fsl,pull-up =3D ; > > + }; > > +}; > > + > > +®_fec_3v3 { > > + gpio =3D <&gpio0 0 0>; > > +}; > > + > > +®_usb_5v { > > + gpio =3D <&gpio0 2 0>; > > +}; > > + > > +&spi2_pins_a { > > + fsl,pinmux-ids =3D < > > + MX28_PAD_SSP2_SCK__SSP2_SCK > > + MX28_PAD_SSP2_MOSI__SSP2_CMD > > + MX28_PAD_SSP2_MISO__SSP2_D0 > > + MX28_PAD_SSP2_SS0__GPIO_2_19 > > + >; > > +}; =20 >=20 > Gentle ping on this patch. Gentle ping on this patch. Are there any comments regarding it? >=20 >=20 > Best regards, >=20 > Lukasz Majewski >=20 > -- >=20 > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > lukma@denx.de Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de --Sig_/V7FuaNgqB+vX/Npg4EOHPPf Content-Type: application/pgp-signature Content-Description: OpenPGP digital signature -----BEGIN PGP SIGNATURE----- iQEzBAEBCgAdFiEEgAyFJ+N6uu6+XupJAR8vZIA0zr0FAl/iMBgACgkQAR8vZIA0 zr0qAgf/VzXnTx95PnMYmCy6X0HBmwKgcR9LcWJ933Et/SsjrW97LIr9a/4WeZHn r3OvqPCkUIwLq4FIPUw4/yyTFTnaEiJqzl1mm9MLYRHAWwt98159pKE9XFJ4wp1j vr1UwwfLnR0geAAxAnQy7clWPT0iq42V/rSTrreBPSu4a8V9UU7Vs4/QailJVO+L NOarmGUsupkys2Rm2vhgm2VEbAs9o2NI/iKzuF6JQEN6GrQ6e8d4egKc8gYbnUbk TNbJZTb27c1wX8+UpIEHIbqYrfCqzvCFO2mhSqh6vSmjtj/fv0JPJ111VLjPeZ2t x1WioZYUD6zoY3gf0cMegn/n/ySCJQ== =z7E+ -----END PGP SIGNATURE----- --Sig_/V7FuaNgqB+vX/Npg4EOHPPf--