Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 25 Dec 2020 11:33:21 +0000
To:     Krzysztof Kozlowski <krzk@kernel.org>
From:   Timon Baetz <timon.baetz@protonmail.com>
Cc:     Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        MyungJoo Ham <myungjoo.ham@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Lee Jones <lee.jones@linaro.org>,
        Sebastian Reichel <sre@kernel.org>,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht,
        Marek Szyprowski <m.szyprowski@samsung.com>
Reply-To: Timon Baetz <timon.baetz@protonmail.com>
Subject: Re: [PATCH v4 4/7] power: supply: max8997_charger: Set CHARGER current limit
Message-ID: <20201225123300.07c84dd8.timon.baetz@protonmail.com>
In-Reply-To: <20201224140038.GA48009@kozik-lap>
References: <20201223134221.804943-1-timon.baetz@protonmail.com> <20201223134221.804943-4-timon.baetz@protonmail.com> <20201224095559.GB10937@kozik-lap> <20201224141246.7ad0ffc4.timon.baetz@protonmail.com> <20201224133706.GA22856@kozik-lap> <20201224140038.GA48009@kozik-lap>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

On Thu, 24 Dec 2020 15:00:38 +0100, Krzysztof Kozlowski wrote:
> On Thu, Dec 24, 2020 at 02:37:06PM +0100, Krzysztof Kozlowski wrote:
> > On Thu, Dec 24, 2020 at 01:13:02PM +0000, Timon Baetz wrote: =20
> > > On Thu, 24 Dec 2020 10:55:59 +0100, Krzysztof Kozlowski wrote: =20
> > > > > @@ -170,6 +237,28 @@ static int max8997_battery_probe(struct plat=
form_device *pdev)
> > > > >  =09=09return PTR_ERR(charger->battery);
> > > > >  =09}
> > > > >
> > > > > +=09charger->reg =3D devm_regulator_get(&pdev->dev, "charger"); =
=20
> > > >
> > > > Since you do not use get_optional, you will always get a dummy
> > > > regulator. In case of error, you should either print it or entirely=
 fail
> > > > the probe. Silently continuing makes it difficult to spot errors.
> > > >
> > > > Since the driver could operate in case of extcon/regulator error, j=
ust
> > > > dev_err() so failure will be spotted with dmesg. =20
> > >
> > > I will switch to devm_regulator_get_optional() and print an error on
> > > failure, thanks.
> > > =20
> > > > It will complain on older DTBs because you are introducing incompat=
ible
> > > > change, but that's expected. Just correct all other in-tree DTS. =
=20
> > >
> > > The other 2 in-tree DTS don't have CHARGER regulators. Not sure
> > > how to correct those. Should I add muic and charger nodes without a
> > > charger-supply? It will still complain in that case. =20
> >
> > +Cc Marek,
> >
> > This is why leaving the code as is - devm_regulator_get(), not optional
> > - makes sense. Core would provide dummy regulator, so you only have to
> > provide MUIC node.
> >
> > If you change the code to devm_regulator_get_optional(), you need to ad=
d
> > everything: the charger regulator, the charger node and MUIC node.
> >
> > For Trats, the configuration should be similar as i9100, although I
> > don't know the exact values of chargign voltage.
> >
> > For Origen, there is no battery, so the power supply should not bind.
> > Maybe this could be achieved with "status disabled" for charger node? I=
t
> > depends whether MFD will respect such field... If it disables the
> > charger, you're done. =20
>=20
> I just looked at the MFD code and tested it - it nicely skips disabled
> devices. Therefore, for Origen I propose to add disabled nodes for
> charger and MUIC because these pins are not connected. No need to add
> regulators in such case.

With a dummy regulator regulator_set_current_limit() fails with -EINVAL.
Isn't it better to just skip charging control (and dev_info()) when there=
=20
is no extcon or regulator? The charger driver would still probe
without those 2 properties and work as before.

Adding disabled nodes for Origen would probably still makes sense.

I also noticed that adding nodes for those MFD cells prints "DMA mask
not set" which seems to be related to https://lkml.org/lkml/2020/4/23/873.
Any suggestions on how to handle that?

Thanks,
Timon