Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   me@dylanvanassche.be
To:     pavel@ucw.cz, dmurphy@ti.com, linux-leds@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Dylan Van Assche <me@dylanvanassche.be>
Subject: [PATCH] leds: gpio: Set max brightness to 1
Date:   Sun, 27 Dec 2020 15:40:15 +0100
Message-Id: <20201227144014.6590-1-me@dylanvanassche.be>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Dylan Van Assche <me@dylanvanassche.be>

GPIO LEDs only know 2 states: ON or OFF and do not have PWM capabilities.
However, the max brightness is reported as 255.

This patch sets the max brightness value of a GPIO controlled LED to 1.

Tested on my PinePhone 1.2.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
---
 drivers/leds/leds-gpio.c | 3 ++-
 include/linux/leds.h     | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 93f5b1b60fde..0d66f19d71ba 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -96,7 +96,8 @@ static int create_gpio_led(const struct gpio_led *template,
 	} else {
 		state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
 	}
-	led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
+	led_dat->cdev.brightness = state ? LED_ON : LED_OFF;
+	led_dat->cdev.max_brightness = LED_ON;
 	if (!template->retain_state_suspended)
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 	if (template->panic_indicator)
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 6a8d6409c993..43f0cac2a87b 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -514,6 +514,7 @@ struct gpio_led {
 	const char *name;
 	const char *default_trigger;
 	unsigned 	gpio;
+	unsigned	max_brightness;
 	unsigned	active_low : 1;
 	unsigned	retain_state_suspended : 1;
 	unsigned	panic_indicator : 1;
-- 
2.26.2