Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751757AbWIFWK5 (ORCPT ); Wed, 6 Sep 2006 18:10:57 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751759AbWIFWK5 (ORCPT ); Wed, 6 Sep 2006 18:10:57 -0400 Received: from omx2-ext.sgi.com ([192.48.171.19]:40653 "EHLO omx2.sgi.com") by vger.kernel.org with ESMTP id S1751757AbWIFWKz (ORCPT ); Wed, 6 Sep 2006 18:10:55 -0400 Date: Wed, 6 Sep 2006 15:10:08 -0700 From: Paul Jackson To: mel@skynet.ie (Mel Gorman) Cc: linux-kernel@vger.kernel.org, akpm@osdl.org, haveblue@us.ibm.com, apw@shadowen.org, ak@muc.de, benh@kernel.crashing.org, paulus@samba.org, kmannth@gmail.com, tony.luck@intel.com, kamezawa.hiroyu@jp.fujitsu.com, y-goto@jp.fujitsu.com Subject: Re: x86_64 account-for-memmap patch in 2.6.18-rc4-mm3 doesn't boot. Message-Id: <20060906151008.e84ffdd1.pj@sgi.com> In-Reply-To: <20060904094503.GA4475@skynet.ie> References: <20060831034638.4bfa7b46.pj@sgi.com> <20060831100156.24fc0521.pj@sgi.com> <20060901202430.0681f5c5.pj@sgi.com> <20060904094503.GA4475@skynet.ie> Organization: SGI X-Mailer: Sylpheed version 2.2.4 (GTK+ 2.8.3; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 27123 Lines: 590 Mel Gorman wrote: > I could do with those lines, but I believe there was enough information > printed to determine why it failed to boot. I've attached a patch that > should boot the machine and assuming it works, I just need the output of > dmesg. Yup - that patch booted it, and produced the output you asked for. Here's the dmesg output from booting your patch: Linux version 2.6.18-rc4-mm3 (pj@spandau) (gcc version 4.1.0 (SUSE Linux)) #60 SMP Wed Sep 6 16:34:36 CDT 2006 Command line: root=/dev/sda3 console=ttyS1,115200 showopts pj1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f932000 (usable) BIOS-e820: 000000007f932000 - 000000007f9d0000 (ACPI NVS) BIOS-e820: 000000007f9d0000 - 000000007fa42000 (usable) BIOS-e820: 000000007fa42000 - 000000007fa9a000 (reserved) BIOS-e820: 000000007fa9a000 - 000000007fad6000 (usable) BIOS-e820: 000000007fad6000 - 000000007fb1a000 (ACPI NVS) BIOS-e820: 000000007fb1a000 - 000000007fb2b000 (usable) BIOS-e820: 000000007fb2b000 - 000000007fb3a000 (ACPI data) BIOS-e820: 000000007fb3a000 - 000000007fc00000 (usable) BIOS-e820: 00000000ffc00000 - 00000000ffc0c000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 522546) 1 entries of 3200 used Entering add_active_range(0, 522704, 522818) 2 entries of 3200 used Entering add_active_range(0, 522906, 522966) 3 entries of 3200 used Entering add_active_range(0, 523034, 523051) 4 entries of 3200 used Entering add_active_range(0, 523066, 523264) 5 entries of 3200 used end_pfn_map = 1047564 DMI 2.4 present. ACPI: RSDP (v002 INTEL ) @ 0x00000000000f0350 ACPI: XSDT (v001 INTEL S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000007fb39120 ACPI: FADT (v003 INTEL S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000007fb36000 ACPI: MADT (v001 INTEL S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000007fb35000 ACPI: SPCR (v001 INTEL S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000007fb2e000 ACPI: HPET (v001 INTEL S5000PAL 0x00000001 INTL 0x01000013) @ 0x000000007fb2d000 ACPI: MCFG (v001 INTEL S5000PAL 0x00000001 INTL 0x01000013) @ 0x000000007fb2c000 ACPI: SSDT (v002 INTEL S5000PAL 0x00004000 INTL 0x01000013) @ 0x000000007fb2b000 ACPI: DSDT (v002 INTEL S5000PAL 0x00000008 INTL 0x01000013) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007fc00000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 522546) 1 entries of 3200 used Entering add_active_range(0, 522704, 522818) 2 entries of 3200 used Entering add_active_range(0, 522906, 522966) 3 entries of 3200 used Entering add_active_range(0, 523034, 523051) 4 entries of 3200 used Entering add_active_range(0, 523066, 523264) 5 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007fc00000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[6] active PFN ranges 0: 0 -> 159 0: 256 -> 522546 0: 522704 -> 522818 0: 522906 -> 522966 0: 523034 -> 523051 0: 523066 -> 523264 On node 0 totalpages: 522838 DMA zone: 7154 pages used for memmap memmap_size of 7154 exceeds 3999 DMA zone: 1732 pages reserved DMA zone: 2267 pages, LIFO batch:0 DMA32 zone: 518839 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec84000] gsi_base[48]) IOAPIC[2]: apic_id 10, address 0xfec84000, GSI 48-71 ACPI: IOAPIC (id[0x0b] address[0xfec84400] gsi_base[72]) IOAPIC[3]: apic_id 11, address 0xfec84400, GSI 72-95 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7fc00000:80000000) SMP: Allowing 8 CPUs, 4 hotplug CPUs PERCPU: Allocating 32000 bytes of per cpu data Built 1 zonelists. Total pages: 521106 Kernel command line: root=/dev/sda3 console=ttyS1,115200 showopts pj1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2052128k/2093056k available (3520k kernel code, 39224k reserved, 2327k data, 280k init) Calibrating delay using timer specific routine.. 5324.65 BogoMIPS (lpj=10649309) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 20781307 Detected 20.781 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 5320.18 BogoMIPS (lpj=10640368) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Genuine Intel(R) CPU @ 2.66GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 5320.13 BogoMIPS (lpj=10640272) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Genuine Intel(R) CPU @ 2.66GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 5320.15 BogoMIPS (lpj=10640316) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM2) Genuine Intel(R) CPU @ 2.66GHz stepping 04 Brought up 4 CPUs testing NMI watchdog ... OK. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2660.008 MHz processor. migration_cost=24,8015 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at a0000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Losing some ticks... checking if CPU frequency changed. PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:10:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO.PCIA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT] Intel 82802 RNG detected SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. PCI: Bridge: 0000:03:00.0 IO window: disabled. MEM window: b8900000-b89fffff PREFETCH window: b8b00000-b8bfffff PCI: Bridge: 0000:03:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: b8900000-b89fffff PREFETCH window: b8b00000-b8bfffff PCI: Bridge: 0000:02:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:02.0 IO window: 2000-2fff MEM window: b8000000-b88fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: 2000-2fff MEM window: b8000000-b89fffff PREFETCH window: b8b00000-b8bfffff PCI: Bridge: 0000:01:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: 2000-2fff MEM window: b8000000-b8afffff PREFETCH window: b8b00000-b8bfffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0c:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0c:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: b8c00000-b8cfffff PREFETCH window: b0000000-b7ffffff GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:03:00.0 to 64 PCI: Setting latency timer of device 0000:03:00.2 to 64 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:01.0 to 64 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:0c:00.0 to 64 PCI: Setting latency timer of device 0000:0c:00.2 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with large block/inode numbers, no debug enabled io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] Allocate Port Service[0000:00:04.0:pcie02] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] Allocate Port Service[0000:00:05.0:pcie02] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] Allocate Port Service[0000:00:06.0:pcie02] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] PCI: Setting latency timer of device 0000:01:00.0 to 64 Allocate Port Service[0000:01:00.0:pcie10] Allocate Port Service[0000:01:00.0:pcie11] PCI: Setting latency timer of device 0000:02:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:00.0:pcie20] Allocate Port Service[0000:02:00.0:pcie21] Allocate Port Service[0000:02:00.0:pcie22] PCI: Setting latency timer of device 0000:02:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:01.0:pcie20] Allocate Port Service[0000:02:01.0:pcie21] PCI: Setting latency timer of device 0000:02:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:02.0:pcie20] Allocate Port Service[0000:02:02.0:pcie21] Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:02.0:pcie01 failed with error 2 aer_init: AER service init fails - No ACPI _OSC support aer: probe of 0000:00:03.0:pcie01 failed with error 1 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:04.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:05.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:06.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:07.0:pcie01 failed with error 2 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Invalid PBLK length [5] ACPI: Invalid PBLK length [5] ACPI: Invalid PBLK length [5] ACPI: Invalid PBLK length [5] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x6 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x7 Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.1.9-k6 Copyright (c) 1999-2006 Intel Corporation. GSI 17 sharing vector 0x42 and IRQ 17 ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:07:00.0 to 64 e1000: 0000:07:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:04:23:cf:2d:d2 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection GSI 18 sharing vector 0x4A and IRQ 18 ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 19 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:07:00.1 to 64 e1000: 0000:07:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:04:23:cf:2d:d3 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection e100: Intel(R) PRO/100 Network Driver, 3.5.10-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ESB2: IDE controller at PCI slot 0000:00:1f.1 GSI 19 sharing vector 0x52 and IRQ 19 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 82 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: DV-28E-N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006 megasas: 0x1000:0x0411:0x8086:0x3501: bus 4:slot 14:func 0 ACPI: PCI Interrupt 0000:04:0e.0[A] -> GSI 18 (level, low) -> IRQ 66 scsi0 : LSI Logic SAS based MegaRAID driver scsi 0:0:0:0: Direct-Access ATA HDT722525DLA380 A80A PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA HDS725050KLA360 AB0A PQ: 0 ANSI: 5 scsi 0:0:2:0: Direct-Access ATA HDS725050KLA360 AB0A PQ: 0 ANSI: 5 scsi 0:0:3:0: Direct-Access ATA HDS725050KLA360 AB0A PQ: 0 ANSI: 5 scsi 0:0:4:0: Direct-Access ATA HDS725050KLA360 AB0A PQ: 0 ANSI: 5 scsi 0:2:0:0: Direct-Access INTEL SROMBSAS18E 1.00 PQ: 0 ANSI: 5 scsi 0:2:1:0: Direct-Access INTEL SROMBSAS18E 1.00 PQ: 0 ANSI: 5 SCSI device sda: 486326272 512-byte hdwr sectors (248999 MB) sda: test WP failed, assume Write Enabled sda: asking for cache data failed sda: assuming drive cache: write through SCSI device sda: 486326272 512-byte hdwr sectors (248999 MB) sda: test WP failed, assume Write Enabled sda: asking for cache data failed sda: assuming drive cache: write through sda: sda1 sda2 sda3 sd 0:2:0:0: Attached scsi disk sda SCSI device sdb: 2923825152 512-byte hdwr sectors (1496998 MB) sdb: test WP failed, assume Write Enabled sdb: asking for cache data failed sdb: assuming drive cache: write through SCSI device sdb: 2923825152 512-byte hdwr sectors (1496998 MB) sdb: test WP failed, assume Write Enabled sdb: asking for cache data failed sdb: assuming drive cache: write through sdb: sdb1 sd 0:2:1:0: Attached scsi disk sdb sd 0:2:0:0: Attached scsi generic sg0 type 0 sd 0:2:1:0: Attached scsi generic sg1 type 0 Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.01 Fusion MPT SAS Host driver 3.04.01 ieee1394: raw1394: /dev/raw1394 device initialized GSI 20 sharing vector 0x5A and IRQ 20 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 90 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 90, io mem 0xb8d00000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18-rc4-mm3 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 90 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 90, io base 0x00003080 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18-rc4-mm3 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 21 sharing vector 0x62 and IRQ 21 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 98 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 98, io base 0x00003060 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18-rc4-mm3 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 90 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 90, io base 0x00003040 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.18-rc4-mm3 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 98 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 98, io base 0x00003020 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.18-rc4-mm3 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Intel 810 + AC97 Audio, version 1.01, 16:33:05 Sep 6 2006 oprofile: using timer interrupt. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: (supports S0 S1 S4 S5) logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse as /class/input/input1 XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 280k freed Adding 9438176k swap on /dev/disk/by-id/scsi-3600062b0000011200c86316cf30a2b4c-part2. Priority:-1 extents:1 across:9438176k ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present -- I won't rest till it's the best ... Programmer, Linux Scalability Paul Jackson 1.925.600.0401 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/