Received: by 2002:a05:6a10:f347:0:0:0:0 with SMTP id d7csp13960022pxu; Mon, 4 Jan 2021 09:02:37 -0800 (PST) X-Google-Smtp-Source: ABdhPJzY+l/6qIUM/sLCQen+cmhpbUgZDoXSjVvJgwM9lLpE+DT1ZQK0ugGeYrjKWXcQNtgU0K6u X-Received: by 2002:a17:906:9388:: with SMTP id l8mr67069776ejx.22.1609779757251; Mon, 04 Jan 2021 09:02:37 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1609779757; cv=none; d=google.com; s=arc-20160816; b=k80zCN41jyJVJ0VV+ElwR8SgPW3DgDbb+1UvTwuhDWC3iIrOYcV0iBADlWAwnl6E/K ACPOZcFycykeCUsSpR+EqbH2R/fQS/X4BahAs+8vaiLGcxk64yb9Bv6cLI7fsd6Yc7PW Yl/l/Ish4aXf4/cRcsyHjkvRn1ZKiKMnGvdXk9PWMz8BKJHq9XzdkdN6sk3liJFxsR5S bhBYRWH4gc4BZkLcDPeg50jZXdrEz5pBCY7N4cm9IgpVW9S7nEN5B0trfeBdXlVpcq2W iDqADfOjzLib2avV1Bj4ZS+ZghJJlYKSOfHzRy4ChsGe8yTifDpUhbBSxd3SJtzfrA4l 9wQw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from; bh=V6yV0L0s1xXGhJVpiCrNesCZzNxD7w9Xqd4bdXsN6nU=; b=VQLQADPDL9wWw4Xm5sX3FLKkHzOoJymbbiGEbjpX5Z9Mr79QWuoDcKrR0kx0PJcKcq KiTuoCMHNbPJmlNspU0zmCvFMhLMp/VJCHhR6aDoQ4TdujLJKFTLLpJLiorLmfmINTIu /nPsVu/A2DYauzdn7IWDsGh3InnPx4VTFuZAXPHeyu518uh6KB7c+UWwjNKCalHERmXd 0XJ16ya2MiKIv6EmNuWrIQ+l84HxpRgQf8Ow10YXcZxnCSFPkUKQz5QUAwWrLgkwloA3 sdnRq3E0hwvkrD+SnRz2cnmlngIBSGNvWxjcktiP/fgKyd/5lacpRVYW2e5Bf42gPizD 53OQ== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id u19si28899772ejj.601.2021.01.04.09.02.13; Mon, 04 Jan 2021 09:02:37 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727856AbhADQ67 (ORCPT + 99 others); Mon, 4 Jan 2021 11:58:59 -0500 Received: from mail-io1-f54.google.com ([209.85.166.54]:37040 "EHLO mail-io1-f54.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727276AbhADQ66 (ORCPT ); Mon, 4 Jan 2021 11:58:58 -0500 Received: by mail-io1-f54.google.com with SMTP id p187so25555039iod.4; Mon, 04 Jan 2021 08:58:42 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=V6yV0L0s1xXGhJVpiCrNesCZzNxD7w9Xqd4bdXsN6nU=; b=DbfKzS4UbvIAjYOk+y1HZyeCkR0nL3nhJI7YQtBHxHvdGilVrQwAS/wnvbL7/XOWL8 txXuicZG9roQPi4j6Z+3f2lf9lwzUA7zIQjWQMCGefUNHFxeoRVK5TiGIsPGfBh4qUJX sOLGB+qojRQEP7v0yi1JXKemD4Uz5iM+Zf3R97c6HEN8k1Hmb7ZGCynTe02iNXzbaRLz phBAk/0Z3HuF1yJpDaYjXkYwCD6cT4sNlVy0+FsWxOidwlX+MhrWLa8yxRpY481FEF6I T86IpQZ/eARxVsvQveEqfaj9D9FGgcNdHl7NqqhzRzGX+2ztnO0QZi5gU7+jQr2CMBmg +zYQ== X-Gm-Message-State: AOAM53322fv/dTWnrh1Wm2RmXMjmkgpoXoj/pGMpArSkxbAB3ZNOC2q3 UJktSRpfaxn3IVvbzd5LNN3u1o3UGA== X-Received: by 2002:a05:6602:1492:: with SMTP id a18mr59966646iow.124.1609779496135; Mon, 04 Jan 2021 08:58:16 -0800 (PST) Received: from xps15.herring.priv ([64.188.179.253]) by smtp.googlemail.com with ESMTPSA id a18sm42381528ilt.52.2021.01.04.08.58.10 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 04 Jan 2021 08:58:15 -0800 (PST) From: Rob Herring To: Guennadi Liakhovetski , Guennadi Liakhovetski , Sakari Ailus , Maxime Ripard , Mauro Carvalho Chehab , Jacopo Mondi , Laurent Pinchart Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, Hans Verkuil , Laurent Pinchart Subject: [PATCH v4 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas Date: Mon, 4 Jan 2021 09:58:07 -0700 Message-Id: <20210104165808.2166686-2-robh@kernel.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210104165808.2166686-1-robh@kernel.org> References: <20210104165808.2166686-1-robh@kernel.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Convert video-interfaces.txt to DT schema. As it contains a mixture of device level and endpoint properties, split it up into 2 schemas. Binding schemas will need to reference both the graph.yaml and video-interfaces.yaml schemas. The exact schema depends on how many ports and endpoints for the binding. A single port with a single endpoint looks similar to this: port: $ref: /schemas/graph.yaml#/$defs/port-base properties: endpoint: $ref: video-interfaces.yaml# unevaluatedProperties: false properties: bus-width: enum: [ 8, 10, 12, 16 ] pclk-sample: true hsync-active: true vsync-active: true required: - bus-width additionalProperties: false Acked-by: Sakari Ailus Acked-by: Jacopo Mondi Acked-by: Guennadi Liakhovetski Acked-by: Hans Verkuil Reviewed-by: Laurent Pinchart Signed-off-by: Rob Herring --- v4: - drop graph.txt ref - s/Bt.656/BT.656/ - Replace Guennadi with Laurent as maintainer v3: - Support up to 9 physical lanes - Set lane-polarities array bounds --- .../media/video-interface-devices.yaml | 406 +++++++++++ .../bindings/media/video-interfaces.txt | 640 +----------------- .../bindings/media/video-interfaces.yaml | 344 ++++++++++ 3 files changed, 751 insertions(+), 639 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml new file mode 100644 index 000000000000..4527f56a5a6e --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml @@ -0,0 +1,406 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/video-interface-devices.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common bindings for video receiver and transmitter devices + +maintainers: + - Jacopo Mondi + - Sakari Ailus + +properties: + flash-leds: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + An array of phandles, each referring to a flash LED, a sub-node of the LED + driver device node. + + lens-focus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle to the node of the focus lens controller. + + rotation: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 90, 180, 270 ] + description: | + The camera rotation is expressed as the angular difference in degrees + between two reference systems, one relative to the camera module, and one + defined on the external world scene to be captured when projected on the + image sensor pixel array. + + A camera sensor has a 2-dimensional reference system 'Rc' defined by its + pixel array read-out order. The origin is set to the first pixel being + read out, the X-axis points along the column read-out direction towards + the last columns, and the Y-axis along the row read-out direction towards + the last row. + + A typical example for a sensor with a 2592x1944 pixel array matrix + observed from the front is: + + 2591 X-axis 0 + <------------------------+ 0 + .......... ... ..........! + .......... ... ..........! Y-axis + ... ! + .......... ... ..........! + .......... ... ..........! 1943 + V + + The external world scene reference system 'Rs' is a 2-dimensional + reference system on the focal plane of the camera module. The origin is + placed on the top-left corner of the visible scene, the X-axis points + towards the right, and the Y-axis points towards the bottom of the scene. + The top, bottom, left and right directions are intentionally not defined + and depend on the environment in which the camera is used. + + A typical example of a (very common) picture of a shark swimming from left + to right, as seen from the camera, is: + + 0 X-axis + 0 +-------------------------------------> + ! + ! + ! + ! |\____)\___ + ! ) _____ __`< + ! |/ )/ + ! + ! + ! + V + Y-axis + + with the reference system 'Rs' placed on the camera focal plane: + + ¸.·˙! + ¸.·˙ ! + _ ¸.·˙ ! + +-/ \-+¸.·˙ ! + | (o) | ! Camera focal plane + +-----+˙·.¸ ! + ˙·.¸ ! + ˙·.¸ ! + ˙·.¸! + + When projected on the sensor's pixel array, the image and the associated + reference system 'Rs' are typically (but not always) inverted, due to the + camera module's lens optical inversion effect. + + Assuming the above represented scene of the swimming shark, the lens + inversion projects the scene and its reference system onto the sensor + pixel array, seen from the front of the camera sensor, as follows: + + Y-axis + ^ + ! + ! + ! + ! |\_____)\__ + ! ) ____ ___.< + ! |/ )/ + ! + ! + ! + 0 +-------------------------------------> + 0 X-axis + + Note the shark being upside-down. + + The resulting projected reference system is named 'Rp'. + + The camera rotation property is then defined as the angular difference in + the counter-clockwise direction between the camera reference system 'Rc' + and the projected scene reference system 'Rp'. It is expressed in degrees + as a number in the range [0, 360[. + + Examples + + 0 degrees camera rotation: + + + Y-Rp + ^ + Y-Rc ! + ^ ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! 0 +-------------------------------------> + ! 0 X-Rp + 0 +-------------------------------------> + 0 X-Rc + + + X-Rc 0 + <------------------------------------+ 0 + X-Rp 0 ! + <------------------------------------+ 0 ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! V + ! Y-Rc + V + Y-Rp + + 90 degrees camera rotation: + + 0 Y-Rc + 0 +--------------------> + ! Y-Rp + ! ^ + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! 0 +-------------------------------------> + ! 0 X-Rp + ! + ! + ! + ! + V + X-Rc + + 180 degrees camera rotation: + + 0 + <------------------------------------+ 0 + X-Rc ! + Y-Rp ! + ^ ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! V + ! Y-Rc + 0 +-------------------------------------> + 0 X-Rp + + 270 degrees camera rotation: + + 0 Y-Rc + 0 +--------------------> + ! 0 + ! <-----------------------------------+ 0 + ! X-Rp ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! V + ! Y-Rp + ! + ! + ! + ! + V + X-Rc + + + Example one - Webcam + + A camera module installed on the user facing part of a laptop screen + casing used for video calls. The captured images are meant to be displayed + in landscape mode (width > height) on the laptop screen. + + The camera is typically mounted upside-down to compensate the lens optical + inversion effect: + + Y-Rp + Y-Rc ^ + ^ ! + ! ! + ! ! |\_____)\__ + ! ! ) ____ ___.< + ! ! |/ )/ + ! ! + ! ! + ! ! + ! 0 +-------------------------------------> + ! 0 X-Rp + 0 +-------------------------------------> + 0 X-Rc + + The two reference systems are aligned, the resulting camera rotation is + 0 degrees, no rotation correction needs to be applied to the resulting + image once captured to memory buffers to correctly display it to users: + + +--------------------------------------+ + ! ! + ! ! + ! ! + ! |\____)\___ ! + ! ) _____ __`< ! + ! |/ )/ ! + ! ! + ! ! + ! ! + +--------------------------------------+ + + If the camera sensor is not mounted upside-down to compensate for the lens + optical inversion, the two reference systems will not be aligned, with + 'Rp' being rotated 180 degrees relatively to 'Rc': + + + X-Rc 0 + <------------------------------------+ 0 + ! + Y-Rp ! + ^ ! + ! ! + ! |\_____)\__ ! + ! ) ____ ___.< ! + ! |/ )/ ! + ! ! + ! ! + ! V + ! Y-Rc + 0 +-------------------------------------> + 0 X-Rp + + The image once captured to memory will then be rotated by 180 degrees: + + +--------------------------------------+ + ! ! + ! ! + ! ! + ! __/(_____/| ! + ! >.___ ____ ( ! + ! \( \| ! + ! ! + ! ! + ! ! + +--------------------------------------+ + + A software rotation correction of 180 degrees should be applied to + correctly display the image: + + +--------------------------------------+ + ! ! + ! ! + ! ! + ! |\____)\___ ! + ! ) _____ __`< ! + ! |/ )/ ! + ! ! + ! ! + ! ! + +--------------------------------------+ + + Example two - Phone camera + + A camera installed on the back side of a mobile device facing away from + the user. The captured images are meant to be displayed in portrait mode + (height > width) to match the device screen orientation and the device + usage orientation used when taking the picture. + + The camera sensor is typically mounted with its pixel array longer side + aligned to the device longer side, upside-down mounted to compensate for + the lens optical inversion effect: + + 0 Y-Rc + 0 +--------------------> + ! Y-Rp + ! ^ + ! ! + ! ! + ! ! + ! ! |\_____)\__ + ! ! ) ____ ___.< + ! ! |/ )/ + ! ! + ! ! + ! ! + ! 0 +-------------------------------------> + ! 0 X-Rp + ! + ! + ! + ! + V + X-Rc + + The two reference systems are not aligned and the 'Rp' reference system is + rotated by 90 degrees in the counter-clockwise direction relatively to the + 'Rc' reference system. + + The image once captured to memory will be rotated: + + +-------------------------------------+ + | _ _ | + | \ / | + | | | | + | | | | + | | > | + | < | | + | | | | + | . | + | V | + +-------------------------------------+ + + A correction of 90 degrees in counter-clockwise direction has to be + applied to correctly display the image in portrait mode on the device + screen: + + +--------------------+ + | | + | | + | | + | | + | | + | | + | |\____)\___ | + | ) _____ __`< | + | |/ )/ | + | | + | | + | | + | | + | | + +--------------------+ + + orientation: + description: + The orientation of a device (typically an image sensor or a flash LED) + describing its mounting position relative to the usage orientation of the + system where the device is installed on. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + # Front. The device is mounted on the front facing side of the system. For + # mobile devices such as smartphones, tablets and laptops the front side + # is the user facing side. + - 0 + # Back. The device is mounted on the back side of the system, which is + # defined as the opposite side of the front facing one. + - 1 + # External. The device is not attached directly to the system but is + # attached in a way that allows it to move freely. + - 2 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 3920f25a9123..8fcf5f52bf5b 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -1,639 +1 @@ -Common bindings for video receiver and transmitter interfaces - -General concept ---------------- - -Video data pipelines usually consist of external devices, e.g. camera sensors, -controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including -video DMA engines and video data processors. - -SoC internal blocks are described by DT nodes, placed similarly to other SoC -blocks. External devices are represented as child nodes of their respective -bus controller nodes, e.g. I2C. - -Data interfaces on all video devices are described by their child 'port' nodes. -Configuration of a port depends on other devices participating in the data -transfer and is described by 'endpoint' subnodes. - -device { - ... - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - ... - endpoint@0 { ... }; - endpoint@1 { ... }; - }; - port@1 { ... }; - }; -}; - -If a port can be configured to work with more than one remote device on the same -bus, an 'endpoint' child node must be provided for each of them. If more than -one port is present in a device node or there is more than one endpoint at a -port, or port node needs to be associated with a selected hardware interface, -a common scheme using '#address-cells', '#size-cells' and 'reg' properties is -used. - -All 'port' nodes can be grouped under optional 'ports' node, which allows to -specify #address-cells, #size-cells properties independently for the 'port' -and 'endpoint' nodes and any child device nodes a device might have. - -Two 'endpoint' nodes are linked with each other through their 'remote-endpoint' -phandles. An endpoint subnode of a device contains all properties needed for -configuration of this device for data exchange with other device. In most -cases properties at the peer 'endpoint' nodes will be identical, however they -might need to be different when there is any signal modifications on the bus -between two devices, e.g. there are logic signal inverters on the lines. - -It is allowed for multiple endpoints at a port to be active simultaneously, -where supported by a device. For example, in case where a data interface of -a device is partitioned into multiple data busses, e.g. 16-bit input port -divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width -and data-shift properties can be used to assign physical data lines to each -endpoint node (logical bus). - -Documenting bindings for devices --------------------------------- - -All required and optional bindings the device supports shall be explicitly -documented in device DT binding documentation. This also includes port and -endpoint nodes for the device, including unit-addresses and reg properties where -relevant. - -Please also see Documentation/devicetree/bindings/graph.txt . - -Required properties -------------------- - -If there is more than one 'port' or more than one 'endpoint' node or 'reg' -property is present in port and/or endpoint nodes the following properties -are required in a relevant parent node: - - - #address-cells : number of cells required to define port/endpoint - identifier, should be 1. - - #size-cells : should be zero. - - -Optional properties -------------------- - -- flash-leds: An array of phandles, each referring to a flash LED, a sub-node - of the LED driver device node. - -- lens-focus: A phandle to the node of the focus lens controller. - -- rotation: The camera rotation is expressed as the angular difference in - degrees between two reference systems, one relative to the camera module, and - one defined on the external world scene to be captured when projected on the - image sensor pixel array. - - A camera sensor has a 2-dimensional reference system 'Rc' defined by - its pixel array read-out order. The origin is set to the first pixel - being read out, the X-axis points along the column read-out direction - towards the last columns, and the Y-axis along the row read-out - direction towards the last row. - - A typical example for a sensor with a 2592x1944 pixel array matrix - observed from the front is: - - 2591 X-axis 0 - <------------------------+ 0 - .......... ... ..........! - .......... ... ..........! Y-axis - ... ! - .......... ... ..........! - .......... ... ..........! 1943 - V - - The external world scene reference system 'Rs' is a 2-dimensional - reference system on the focal plane of the camera module. The origin is - placed on the top-left corner of the visible scene, the X-axis points - towards the right, and the Y-axis points towards the bottom of the - scene. The top, bottom, left and right directions are intentionally not - defined and depend on the environment in which the camera is used. - - A typical example of a (very common) picture of a shark swimming from - left to right, as seen from the camera, is: - - 0 X-axis - 0 +-------------------------------------> - ! - ! - ! - ! |\____)\___ - ! ) _____ __`< - ! |/ )/ - ! - ! - ! - V - Y-axis - - with the reference system 'Rs' placed on the camera focal plane: - - ¸.·˙! - ¸.·˙ ! - _ ¸.·˙ ! - +-/ \-+¸.·˙ ! - | (o) | ! Camera focal plane - +-----+˙·.¸ ! - ˙·.¸ ! - ˙·.¸ ! - ˙·.¸! - - When projected on the sensor's pixel array, the image and the associated - reference system 'Rs' are typically (but not always) inverted, due to - the camera module's lens optical inversion effect. - - Assuming the above represented scene of the swimming shark, the lens - inversion projects the scene and its reference system onto the sensor - pixel array, seen from the front of the camera sensor, as follows: - - Y-axis - ^ - ! - ! - ! - ! |\_____)\__ - ! ) ____ ___.< - ! |/ )/ - ! - ! - ! - 0 +-------------------------------------> - 0 X-axis - - Note the shark being upside-down. - - The resulting projected reference system is named 'Rp'. - - The camera rotation property is then defined as the angular difference - in the counter-clockwise direction between the camera reference system - 'Rc' and the projected scene reference system 'Rp'. It is expressed in - degrees as a number in the range [0, 360[. - - Examples - - 0 degrees camera rotation: - - - Y-Rp - ^ - Y-Rc ! - ^ ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! 0 +-------------------------------------> - ! 0 X-Rp - 0 +-------------------------------------> - 0 X-Rc - - - X-Rc 0 - <------------------------------------+ 0 - X-Rp 0 ! - <------------------------------------+ 0 ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! V - ! Y-Rc - V - Y-Rp - - 90 degrees camera rotation: - - 0 Y-Rc - 0 +--------------------> - ! Y-Rp - ! ^ - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! 0 +-------------------------------------> - ! 0 X-Rp - ! - ! - ! - ! - V - X-Rc - - 180 degrees camera rotation: - - 0 - <------------------------------------+ 0 - X-Rc ! - Y-Rp ! - ^ ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! V - ! Y-Rc - 0 +-------------------------------------> - 0 X-Rp - - 270 degrees camera rotation: - - 0 Y-Rc - 0 +--------------------> - ! 0 - ! <-----------------------------------+ 0 - ! X-Rp ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! ! - ! V - ! Y-Rp - ! - ! - ! - ! - V - X-Rc - - - Example one - Webcam - - A camera module installed on the user facing part of a laptop screen - casing used for video calls. The captured images are meant to be - displayed in landscape mode (width > height) on the laptop screen. - - The camera is typically mounted upside-down to compensate the lens - optical inversion effect: - - Y-Rp - Y-Rc ^ - ^ ! - ! ! - ! ! |\_____)\__ - ! ! ) ____ ___.< - ! ! |/ )/ - ! ! - ! ! - ! ! - ! 0 +-------------------------------------> - ! 0 X-Rp - 0 +-------------------------------------> - 0 X-Rc - - The two reference systems are aligned, the resulting camera rotation is - 0 degrees, no rotation correction needs to be applied to the resulting - image once captured to memory buffers to correctly display it to users: - - +--------------------------------------+ - ! ! - ! ! - ! ! - ! |\____)\___ ! - ! ) _____ __`< ! - ! |/ )/ ! - ! ! - ! ! - ! ! - +--------------------------------------+ - - If the camera sensor is not mounted upside-down to compensate for the - lens optical inversion, the two reference systems will not be aligned, - with 'Rp' being rotated 180 degrees relatively to 'Rc': - - - X-Rc 0 - <------------------------------------+ 0 - ! - Y-Rp ! - ^ ! - ! ! - ! |\_____)\__ ! - ! ) ____ ___.< ! - ! |/ )/ ! - ! ! - ! ! - ! V - ! Y-Rc - 0 +-------------------------------------> - 0 X-Rp - - The image once captured to memory will then be rotated by 180 degrees: - - +--------------------------------------+ - ! ! - ! ! - ! ! - ! __/(_____/| ! - ! >.___ ____ ( ! - ! \( \| ! - ! ! - ! ! - ! ! - +--------------------------------------+ - - A software rotation correction of 180 degrees should be applied to - correctly display the image: - - +--------------------------------------+ - ! ! - ! ! - ! ! - ! |\____)\___ ! - ! ) _____ __`< ! - ! |/ )/ ! - ! ! - ! ! - ! ! - +--------------------------------------+ - - Example two - Phone camera - - A camera installed on the back side of a mobile device facing away from - the user. The captured images are meant to be displayed in portrait mode - (height > width) to match the device screen orientation and the device - usage orientation used when taking the picture. - - The camera sensor is typically mounted with its pixel array longer side - aligned to the device longer side, upside-down mounted to compensate for - the lens optical inversion effect: - - 0 Y-Rc - 0 +--------------------> - ! Y-Rp - ! ^ - ! ! - ! ! - ! ! - ! ! |\_____)\__ - ! ! ) ____ ___.< - ! ! |/ )/ - ! ! - ! ! - ! ! - ! 0 +-------------------------------------> - ! 0 X-Rp - ! - ! - ! - ! - V - X-Rc - - The two reference systems are not aligned and the 'Rp' reference - system is rotated by 90 degrees in the counter-clockwise direction - relatively to the 'Rc' reference system. - - The image once captured to memory will be rotated: - - +-------------------------------------+ - | _ _ | - | \ / | - | | | | - | | | | - | | > | - | < | | - | | | | - | . | - | V | - +-------------------------------------+ - - A correction of 90 degrees in counter-clockwise direction has to be - applied to correctly display the image in portrait mode on the device - screen: - - +--------------------+ - | | - | | - | | - | | - | | - | | - | |\____)\___ | - | ) _____ __`< | - | |/ )/ | - | | - | | - | | - | | - | | - +--------------------+ - -- orientation: The orientation of a device (typically an image sensor or a flash - LED) describing its mounting position relative to the usage orientation of the - system where the device is installed on. - Possible values are: - 0 - Front. The device is mounted on the front facing side of the system. - For mobile devices such as smartphones, tablets and laptops the front side is - the user facing side. - 1 - Back. The device is mounted on the back side of the system, which is - defined as the opposite side of the front facing one. - 2 - External. The device is not attached directly to the system but is - attached in a way that allows it to move freely. - -Optional endpoint properties ----------------------------- - -- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node. -- slave-mode: a boolean property indicating that the link is run in slave mode. - The default when this property is not specified is master mode. In the slave - mode horizontal and vertical synchronization signals are provided to the - slave device (data source) by the master device (data sink). In the master - mode the data source device is also the source of the synchronization signals. -- bus-type: data bus type. Possible values are: - 1 - MIPI CSI-2 C-PHY - 2 - MIPI CSI1 - 3 - CCP2 - 4 - MIPI CSI-2 D-PHY - 5 - Parallel - 6 - Bt.656 -- bus-width: number of data lines actively used, valid for the parallel busses. -- data-shift: on the parallel data busses, if bus-width is used to specify the - number of data lines, data-shift can be used to specify which data lines are - used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used. -- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. -- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. - Note, that if HSYNC and VSYNC polarities are not specified, embedded - synchronization may be required, where supported. -- data-active: similar to HSYNC and VSYNC, specifies data line polarity. -- data-enable-active: similar to HSYNC and VSYNC, specifies the data enable - signal polarity. -- field-even-active: field signal level during the even field data transmission. -- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock - signal. -- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for - LOW/HIGH respectively. -- data-lanes: an array of physical data lane indexes. Position of an entry - determines the logical lane number, while the value of an entry indicates - physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have - "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0. - If the hardware does not support lane reordering, monotonically - incremented values shall be used from 0 or 1 onwards, depending on - whether or not there is also a clock lane. This property is valid for - serial busses only (e.g. MIPI CSI-2). -- clock-lanes: an array of physical clock lane indexes. Position of an entry - determines the logical lane number, while the value of an entry indicates - physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", - which places the clock lane on hardware lane 0. This property is valid for - serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this - array contains only one entry. -- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous - clock mode. -- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for - instance, this is the actual frequency of the bus, not bits per clock per - lane value. An array of 64-bit unsigned integers. -- lane-polarities: an array of polarities of the lanes starting from the clock - lane and followed by the data lanes in the same order as in data-lanes. - Valid values are 0 (normal) and 1 (inverted). The length of the array - should be the combined length of data-lanes and clock-lanes properties. - If the lane-polarities property is omitted, the value must be interpreted - as 0 (normal). This property is valid for serial busses only. -- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used - with CCP2, for instance. - -Example -------- - -The example snippet below describes two data pipelines. ov772x and imx074 are -camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively. -Both sensors are on the I2C control bus corresponding to the i2c0 controller -node. ov772x sensor is linked directly to the ceu0 video host interface. -imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a -(single) DMA engine writing captured data to memory. ceu0 node has a single -'port' node which may indicate that at any time only one of the following data -pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. - - ceu0: ceu@fe910000 { - compatible = "renesas,sh-mobile-ceu"; - reg = <0xfe910000 0xa0>; - interrupts = <0x880>; - - mclk: master_clock { - compatible = "renesas,ceu-clock"; - #clock-cells = <1>; - clock-frequency = <50000000>; /* Max clock frequency */ - clock-output-names = "mclk"; - }; - - port { - #address-cells = <1>; - #size-cells = <0>; - - /* Parallel bus endpoint */ - ceu0_1: endpoint@1 { - reg = <1>; /* Local endpoint # */ - remote = <&ov772x_1_1>; /* Remote phandle */ - bus-width = <8>; /* Used data lines */ - data-shift = <2>; /* Lines 9:2 are used */ - - /* If hsync-active/vsync-active are missing, - embedded BT.656 sync is used */ - hsync-active = <0>; /* Active low */ - vsync-active = <0>; /* Active low */ - data-active = <1>; /* Active high */ - pclk-sample = <1>; /* Rising */ - }; - - /* MIPI CSI-2 bus endpoint */ - ceu0_0: endpoint@0 { - reg = <0>; - remote = <&csi2_2>; - }; - }; - }; - - i2c0: i2c@fff20000 { - ... - ov772x_1: camera@21 { - compatible = "ovti,ov772x"; - reg = <0x21>; - vddio-supply = <®ulator1>; - vddcore-supply = <®ulator2>; - - clock-frequency = <20000000>; - clocks = <&mclk 0>; - clock-names = "xclk"; - - port { - /* With 1 endpoint per port no need for addresses. */ - ov772x_1_1: endpoint { - bus-width = <8>; - remote-endpoint = <&ceu0_1>; - hsync-active = <1>; - vsync-active = <0>; /* Who came up with an - inverter here ?... */ - data-active = <1>; - pclk-sample = <1>; - }; - }; - }; - - imx074: camera@1a { - compatible = "sony,imx074"; - reg = <0x1a>; - vddio-supply = <®ulator1>; - vddcore-supply = <®ulator2>; - - clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ - clocks = <&mclk 0>; - clock-names = "sysclk"; /* Assuming this is the - name in the datasheet */ - port { - imx074_1: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&csi2_1>; - }; - }; - }; - }; - - csi2: csi2@ffc90000 { - compatible = "renesas,sh-mobile-csi2"; - reg = <0xffc90000 0x1000>; - interrupts = <0x17a0>; - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */ - reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S, - PHY_M has port address 0, - is unused. */ - csi2_1: endpoint { - clock-lanes = <0>; - data-lanes = <2 1>; - remote-endpoint = <&imx074_1>; - }; - }; - port@2 { - reg = <2>; /* port 2: link to the CEU */ - - csi2_2: endpoint { - remote-endpoint = <&ceu0_0>; - }; - }; - }; +This file has moved to video-interfaces.yaml and video-interface-devices.yaml. diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml new file mode 100644 index 000000000000..0a7a73fd59f2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -0,0 +1,344 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/video-interfaces.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common bindings for video receiver and transmitter interface endpoints + +maintainers: + - Sakari Ailus + - Laurent Pinchart + +description: | + Video data pipelines usually consist of external devices, e.g. camera sensors, + controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including + video DMA engines and video data processors. + + SoC internal blocks are described by DT nodes, placed similarly to other SoC + blocks. External devices are represented as child nodes of their respective + bus controller nodes, e.g. I2C. + + Data interfaces on all video devices are described by their child 'port' nodes. + Configuration of a port depends on other devices participating in the data + transfer and is described by 'endpoint' subnodes. + + device { + ... + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + ... + endpoint@0 { ... }; + endpoint@1 { ... }; + }; + port@1 { ... }; + }; + }; + + If a port can be configured to work with more than one remote device on the same + bus, an 'endpoint' child node must be provided for each of them. If more than + one port is present in a device node or there is more than one endpoint at a + port, or port node needs to be associated with a selected hardware interface, + a common scheme using '#address-cells', '#size-cells' and 'reg' properties is + used. + + All 'port' nodes can be grouped under optional 'ports' node, which allows to + specify #address-cells, #size-cells properties independently for the 'port' + and 'endpoint' nodes and any child device nodes a device might have. + + Two 'endpoint' nodes are linked with each other through their 'remote-endpoint' + phandles. An endpoint subnode of a device contains all properties needed for + configuration of this device for data exchange with other device. In most + cases properties at the peer 'endpoint' nodes will be identical, however they + might need to be different when there is any signal modifications on the bus + between two devices, e.g. there are logic signal inverters on the lines. + + It is allowed for multiple endpoints at a port to be active simultaneously, + where supported by a device. For example, in case where a data interface of + a device is partitioned into multiple data busses, e.g. 16-bit input port + divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width + and data-shift properties can be used to assign physical data lines to each + endpoint node (logical bus). + + Documenting bindings for devices + -------------------------------- + + All required and optional bindings the device supports shall be explicitly + documented in device DT binding documentation. This also includes port and + endpoint nodes for the device, including unit-addresses and reg properties + where relevant. + +allOf: + - $ref: /schemas/graph.yaml#/$defs/endpoint-base + +properties: + slave-mode: + type: boolean + description: + Indicates that the link is run in slave mode. The default when this + property is not specified is master mode. In the slave mode horizontal and + vertical synchronization signals are provided to the slave device (data + source) by the master device (data sink). In the master mode the data + source device is also the source of the synchronization signals. + + bus-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 # MIPI CSI-2 C-PHY + - 2 # MIPI CSI1 + - 3 # CCP2 + - 4 # MIPI CSI-2 D-PHY + - 5 # Parallel + - 6 # BT.656 + description: + Data bus type. + + bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 64 + description: + Number of data lines actively used, valid for the parallel busses. + + data-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 64 + description: + On the parallel data busses, if bus-width is used to specify the number of + data lines, data-shift can be used to specify which data lines are used, + e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used. + + hsync-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. + + vsync-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. Note, + that if HSYNC and VSYNC polarities are not specified, embedded + synchronization may be required, where supported. + + data-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Similar to HSYNC and VSYNC, specifies data line polarity. + + data-enable-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Similar to HSYNC and VSYNC, specifies the data enable signal polarity. + + field-even-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Field signal level during the even field data transmission. + + pclk-sample: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Sample data on rising (1) or falling (0) edge of the pixel clock signal. + + sync-on-green-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. + + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + # Assume up to 9 physical lane indices + maximum: 8 + description: + An array of physical data lane indexes. Position of an entry determines + the logical lane number, while the value of an entry indicates physical + lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;", + assuming the clock lane is on hardware lane 0. If the hardware does not + support lane reordering, monotonically incremented values shall be used + from 0 or 1 onwards, depending on whether or not there is also a clock + lane. This property is valid for serial busses only (e.g. MIPI CSI-2). + + clock-lanes: + $ref: /schemas/types.yaml#/definitions/uint32 + # Assume up to 9 physical lane indices + maximum: 8 + description: + Physical clock lane index. Position of an entry determines the logical + lane number, while the value of an entry indicates physical lane, e.g. for + a MIPI CSI-2 bus we could have "clock-lanes = <0>;", which places the + clock lane on hardware lane 0. This property is valid for serial busses + only (e.g. MIPI CSI-2). + + clock-noncontinuous: + type: boolean + description: + Allow MIPI CSI-2 non-continuous clock mode. + + link-frequencies: + $ref: /schemas/types.yaml#/definitions/uint64-array + description: + Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the + actual frequency of the bus, not bits per clock per lane value. An array + of 64-bit unsigned integers. + + lane-polarities: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 9 + items: + enum: [ 0, 1 ] + description: + An array of polarities of the lanes starting from the clock lane and + followed by the data lanes in the same order as in data-lanes. Valid + values are 0 (normal) and 1 (inverted). The length of the array should be + the combined length of data-lanes and clock-lanes properties. If the + lane-polarities property is omitted, the value must be interpreted as 0 + (normal). This property is valid for serial busses only. + + strobe: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Whether the clock signal is used as clock (0) or strobe (1). Used with + CCP2, for instance. + +additionalProperties: true + +examples: + # The example snippet below describes two data pipelines. ov772x and imx074 + # are camera sensors with a parallel and serial (MIPI CSI-2) video bus + # respectively. Both sensors are on the I2C control bus corresponding to the + # i2c0 controller node. ov772x sensor is linked directly to the ceu0 video + # host interface. imx074 is linked to ceu0 through the MIPI CSI-2 receiver + # (csi2). ceu0 has a (single) DMA engine writing captured data to memory. + # ceu0 node has a single 'port' node which may indicate that at any time + # only one of the following data pipelines can be active: + # ov772x -> ceu0 or imx074 -> csi2 -> ceu0. + - | + ceu@fe910000 { + compatible = "renesas,sh-mobile-ceu"; + reg = <0xfe910000 0xa0>; + interrupts = <0x880>; + + mclk: master_clock { + compatible = "renesas,ceu-clock"; + #clock-cells = <1>; + clock-frequency = <50000000>; /* Max clock frequency */ + clock-output-names = "mclk"; + }; + + port { + #address-cells = <1>; + #size-cells = <0>; + + /* Parallel bus endpoint */ + ceu0_1: endpoint@1 { + reg = <1>; /* Local endpoint # */ + remote-endpoint = <&ov772x_1_1>; /* Remote phandle */ + bus-width = <8>; /* Used data lines */ + data-shift = <2>; /* Lines 9:2 are used */ + + /* If hsync-active/vsync-active are missing, + embedded BT.656 sync is used */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + + /* MIPI CSI-2 bus endpoint */ + ceu0_0: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2_2>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@21 { + compatible = "ovti,ov772x"; + reg = <0x21>; + vddio-supply = <®ulator1>; + vddcore-supply = <®ulator2>; + + clock-frequency = <20000000>; + clocks = <&mclk 0>; + clock-names = "xclk"; + + port { + /* With 1 endpoint per port no need for addresses. */ + ov772x_1_1: endpoint { + bus-width = <8>; + remote-endpoint = <&ceu0_1>; + hsync-active = <1>; + vsync-active = <0>; /* Who came up with an + inverter here ?... */ + data-active = <1>; + pclk-sample = <1>; + }; + }; + }; + + camera@1a { + compatible = "sony,imx074"; + reg = <0x1a>; + vddio-supply = <®ulator1>; + vddcore-supply = <®ulator2>; + + clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ + clocks = <&mclk 0>; + clock-names = "sysclk"; /* Assuming this is the + name in the datasheet */ + port { + imx074_1: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2_1>; + }; + }; + }; + }; + + csi2: csi2@ffc90000 { + compatible = "renesas,sh-mobile-csi2"; + reg = <0xffc90000 0x1000>; + interrupts = <0x17a0>; + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */ + reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S, + PHY_M has port address 0, + is unused. */ + csi2_1: endpoint { + clock-lanes = <0>; + data-lanes = <2 1>; + remote-endpoint = <&imx074_1>; + }; + }; + port@2 { + reg = <2>; /* port 2: link to the CEU */ + + csi2_2: endpoint { + remote-endpoint = <&ceu0_0>; + }; + }; + }; + +... -- 2.27.0