Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Shradha Todi <shradha.t@samsung.com>
To:     linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
        linux-pci@vger.kernel.org
Cc:     pankaj.dubey@samsung.com, sriram.dash@samsung.com,
        niyas.ahmed@samsung.com, p.rajanbabu@samsung.com,
        l.mehra@samsung.com, hari.tv@samsung.com,
        Shradha Todi <shradha.t@samsung.com>,
        Anvesh Salveru <anvesh.salveru@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Vidya Sagar <vidyas@nvidia.com>
Subject: [PATCH v7 3/5] dt-bindings: PHY: P2U: Add binding for ZRX-DC PHY
 property
Date:   Thu,  7 Jan 2021 20:58:41 +0530
Message-Id: <1610033323-10560-4-git-send-email-shradha.t@samsung.com>
In-Reply-To: <1610033323-10560-1-git-send-email-shradha.t@samsung.com>
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 105P
References: <1610033323-10560-1-git-send-email-shradha.t@samsung.com>
        <CGME20210107153051epcas5p4f54210f89f8b8d2e18be016521657be0@epcas5p4.samsung.com>
Precedence: bulk

Add support for ZRX-DC compliant PHYs. If PHY is not compliant to ZRX-DC
specification, then after every 100ms link should transition to recovery
state during the low power states which increases power consumption.

Platforms with ZRX-DC compliant PHY can use "phy-zrxdc-compliant" property
in PCIe PHY DT node.

Signed-off-by: Anvesh Salveru <anvesh.salveru@gmail.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
---
 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
index d23ff90..73f2fa0 100644
--- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
+++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
@@ -15,6 +15,10 @@ Required properties:
 Required properties for PHY port node:
 - #phy-cells: Defined by generic PHY bindings.  Must be 0.
 
+Optional properties for other PHY features:
+- phy-zrxdc-compliant: This property is needed if phy complies with the
+		       ZRX-DC specification.
+
 Refer to phy/phy-bindings.txt for the generic PHY binding properties.
 
 Example:
-- 
2.7.4