Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Douglas Anderson <dianders@chromium.org>
To:     Marc Zyngier <maz@kernel.org>,
        Thomas Gleixner <tglx@linutronix.de>,
        Jason Cooper <jason@lakedaemon.net>,
        Linus Walleij <linus.walleij@linaro.org>
Cc:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        Neeraj Upadhyay <neeraju@codeaurora.org>,
        Rajendra Nayak <rnayak@codeaurora.org>,
        Stephen Boyd <swboyd@chromium.org>,
        Maulik Shah <mkshah@codeaurora.org>,
        linux-gpio@vger.kernel.org,
        Srinivas Ramana <sramana@codeaurora.org>,
        linux-arm-msm@vger.kernel.org,
        Douglas Anderson <dianders@chromium.org>,
        Andy Gross <agross@kernel.org>, linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/4] pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0
Date:   Fri,  8 Jan 2021 09:35:13 -0800
Message-Id: <20210108093339.v5.1.I3ad184e3423d8e479bc3e86f5b393abb1704a1d1@changeid>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

There's currently a comment in the code saying function 0 is GPIO.
Instead of hardcoding it, let's add a member where an SoC can specify
it.  No known SoCs use a number other than 0, but this just makes the
code clearer.  NOTE: no SoC code needs to be updated since we can rely
on zero-initialization.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

(no changes since v1)

 drivers/pinctrl/qcom/pinctrl-msm.c | 4 ++--
 drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index e051aecf95c4..1d2a78452c2d 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -210,8 +210,8 @@ static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
 	if (!g->nfuncs)
 		return 0;
 
-	/* For now assume function 0 is GPIO because it always is */
-	return msm_pinmux_set_mux(pctldev, g->funcs[0], offset);
+	return msm_pinmux_set_mux(pctldev,
+				  g->funcs[pctrl->soc->gpio_func], offset);
 }
 
 static const struct pinmux_ops msm_pinmux_ops = {
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index 333f99243c43..e31a5167c91e 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -118,6 +118,7 @@ struct msm_gpio_wakeirq_map {
  * @wakeirq_dual_edge_errata: If true then GPIOs using the wakeirq_map need
  *                            to be aware that their parent can't handle dual
  *                            edge interrupts.
+ * @gpio_func: Which function number is GPIO (usually 0).
  */
 struct msm_pinctrl_soc_data {
 	const struct pinctrl_pin_desc *pins;
@@ -134,6 +135,7 @@ struct msm_pinctrl_soc_data {
 	const struct msm_gpio_wakeirq_map *wakeirq_map;
 	unsigned int nwakeirq_map;
 	bool wakeirq_dual_edge_errata;
+	unsigned int gpio_func;
 };
 
 extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
-- 
2.29.2.729.g45daf8777d-goog