Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20210108120429.895046-1-robert.foss@linaro.org>
 <20210108120429.895046-17-robert.foss@linaro.org> <X/kLNCOjvTmANYbr@pendragon.ideasonboard.com>
In-Reply-To: <X/kLNCOjvTmANYbr@pendragon.ideasonboard.com>
From:   Robert Foss <robert.foss@linaro.org>
Date:   Wed, 13 Jan 2021 11:03:39 +0100
Message-ID: <CAG3jFysaGbXWtZNY=6s++NjNhimEANJZOoMXtN3udV-n3bOE=w@mail.gmail.com>
Subject: Re: [PATCH v1 16/17] arm64: dts: sdm845-db845c: Add CAMSS ISP node
To:     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Todor Tomov <todor.too@gmail.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Rob Herring <robh+dt@kernel.org>, catalin.marinas@arm.com,
        will@kernel.org, shawnguo@kernel.org, leoyang.li@nxp.com,
        geert+renesas@glider.be, arnd@arndb.de, Anson.Huang@nxp.com,
        michael@walle.cc, agx@sigxcpu.org, max.oss.09@gmail.com,
        linux-arm-msm@vger.kernel.org,
        linux-media <linux-media@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@lists.infradead.org>,
        AngeloGioacchino Del Regno <kholk11@gmail.com>,
        Andrey Konovalov <andrey.konovalov@linaro.org>,
        Tomasz Figa <tfiga@chromium.org>,
        Azam Sadiq Pasha Kapatrala Syed <akapatra@quicinc.com>,
        Sarvesh Sridutt <Sarvesh.Sridutt@smartwirelesscompute.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Thanks Laurent!

On Sat, 9 Jan 2021 at 02:47, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Rob,
>
> Thank you for the patch.
>
> The subject line doesn't match the patch.
>
> On Fri, Jan 08, 2021 at 01:04:28PM +0100, Robert Foss wrote:
> > Add regulators and camss DT node.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > index a943b3f353ce..7bad0515345e 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > @@ -294,6 +294,9 @@ vreg_s7a_1p025: smps7 {
> >                       regulator-max-microvolt = <1028000>;
> >               };
> >
> > +             vdda_mipi_csi0_0p9:
> > +             vdda_mipi_csi1_0p9:
> > +             vdda_mipi_csi2_0p9:
>
> No need for new labels, you can simply use vreg_l1a_0p875 below.

Ack

>
> >               vreg_l1a_0p875: ldo1 {
> >                       regulator-min-microvolt = <880000>;
> >                       regulator-max-microvolt = <880000>;
> > @@ -1106,6 +1109,15 @@ &cci {
> >       status = "okay";
> >  };
> >
> > +&camss {
> > +     vdda-csi0-supply = <&vdda_mipi_csi0_0p9>;
> > +     vdda-csi1-supply = <&vdda_mipi_csi1_0p9>;
> > +     vdda-csi2-supply = <&vdda_mipi_csi2_0p9>;
> > +
> > +     status = "disabled";
>
> This isn't needed.

Ack

>
> > +
>
> Extra blank line.

Ack

>
> > +};
> > +
> >  &cci_i2c0 {
> >       camera@10 {
> >               compatible = "ovti,ov8856";
>
> --
> Regards,
>
> Laurent Pinchart