Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20210106092740.5808-1-reniuschengl@gmail.com>
In-Reply-To: <20210106092740.5808-1-reniuschengl@gmail.com>
From:   Ulf Hansson <ulf.hansson@linaro.org>
Date:   Wed, 13 Jan 2021 11:52:39 +0100
Message-ID: <CAPDyKFq1EVVfU4HU_=-7TmSRinkTCA41pKWtrMD4C+yCUPYECg@mail.gmail.com>
Subject: Re: [PATCH] mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL9763E
To:     Renius Chen <reniuschengl@gmail.com>
Cc:     Adrian Hunter <adrian.hunter@intel.com>,
        "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Ben Chuang <ben.chuang@genesyslogic.com.tw>,
        greg.tu@genesyslogic.com.tw
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Wed, 6 Jan 2021 at 10:27, Renius Chen <reniuschengl@gmail.com> wrote:
>
> The R/W performance of GL9763E is low with some platforms, which
> support ASPM mechanism, due to entering L1 state very frequently
> in R/W process. Enlarge its ASPM L1 entry delay to improve the
> R/W performance of GL9763E.

What do you mean by frequently? In between a burst of request or
during a burst of request?

I am thinking that this could have an effect on energy instead, but I
guess it's not always straightforward to decide what's most important.

Anyway, what does it mean when you change to use 0x3FF? Are you
increasing the idle period? Then for how long?

Kind regards
Uffe

>
> Signed-off-by: Renius Chen <reniuschengl@gmail.com>
> ---
>  drivers/mmc/host/sdhci-pci-gli.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index c6a107d7c742..2d13bfcbcacf 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -88,6 +88,10 @@
>  #define PCIE_GLI_9763E_SCR      0x8E0
>  #define   GLI_9763E_SCR_AXI_REQ           BIT(9)
>
> +#define PCIE_GLI_9763E_CFG2      0x8A4
> +#define   GLI_9763E_CFG2_L1DLY    GENMASK(28, 19)
> +#define   GLI_9763E_CFG2_L1DLY_MAX 0x3FF
> +
>  #define PCIE_GLI_9763E_MMC_CTRL  0x960
>  #define   GLI_9763E_HS400_SLOW     BIT(3)
>
> @@ -792,6 +796,11 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
>         value &= ~GLI_9763E_HS400_SLOW;
>         pci_write_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, value);
>
> +       pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG2, &value);
> +       value &= ~GLI_9763E_CFG2_L1DLY;
> +       value |= FIELD_PREP(GLI_9763E_CFG2_L1DLY, GLI_9763E_CFG2_L1DLY_MAX);
> +       pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG2, value);
> +
>         pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>         value &= ~GLI_9763E_VHS_REV;
>         value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
> --
> 2.27.0
>