Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 13 Jan 2021 14:36:33 +0000
From:   Sean Young <sean@mess.org>
To:     Samuel Holland <samuel@sholland.org>
Cc:     Mauro Carvalho Chehab <mchehab@kernel.org>,
        Maxime Ripard <mripard@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@siol.net>,
        linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-sunxi@googlegroups.com
Subject: Re: [PATCH 3/4] media: sunxi-cir: Factor out hardware initialization
Message-ID: <20210113143633.GB8430@gofer.mess.org>
References: <20210113045132.31430-1-samuel@sholland.org>
 <20210113045132.31430-4-samuel@sholland.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20210113045132.31430-4-samuel@sholland.org>
User-Agent: Mutt/1.10.1 (2018-07-13)
Precedence: bulk

On Tue, Jan 12, 2021 at 10:51:31PM -0600, Samuel Holland wrote:
> In preparation for adding suspend/resume hooks, factor out the hardware
> initialization from the driver probe/remove functions.
> 
> The timeout programmed during init is taken from the `struct rc_dev` so
> it is maintained across an exit/init cycle.
> 
> This resolves some trivial issues with the probe function: throwing away
> the error from clk_prepare_enable and using the wrong type for the
> temporary register value.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
>  drivers/media/rc/sunxi-cir.c | 128 ++++++++++++++++++++---------------
>  1 file changed, 74 insertions(+), 54 deletions(-)
> 
> diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
> index 48be400421cd..ccb9d6b4225d 100644
> --- a/drivers/media/rc/sunxi-cir.c
> +++ b/drivers/media/rc/sunxi-cir.c
> @@ -169,10 +169,74 @@ static int sunxi_ir_set_timeout(struct rc_dev *rc_dev, unsigned int timeout)
>  	return 0;
>  }
>  
> +static int sunxi_ir_hw_init(struct device *dev)
> +{
> +	struct sunxi_ir *ir = dev_get_drvdata(dev);
> +	u32 tmp;
> +	int ret;
> +
> +	ret = reset_control_deassert(ir->rst);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_prepare_enable(ir->apb_clk);
> +	if (ret) {
> +		dev_err(dev, "failed to enable apb clk\n");
> +		goto exit_assert_reset;
> +	}
> +
> +	ret = clk_prepare_enable(ir->clk);
> +	if (ret) {
> +		dev_err(dev, "failed to enable ir clk\n");
> +		goto exit_disable_apb_clk;
> +	}
> +
> +	/* Enable CIR Mode */
> +	writel(REG_CTL_MD, ir->base + SUNXI_IR_CTL_REG);
> +
> +	/* Set noise threshold and idle threshold */
> +	sunxi_ir_set_timeout(ir->rc, ir->rc->timeout);
> +
> +	/* Invert Input Signal */
> +	writel(REG_RXCTL_RPPI, ir->base + SUNXI_IR_RXCTL_REG);
> +
> +	/* Clear All Rx Interrupt Status */
> +	writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
> +
> +	/*
> +	 * Enable IRQ on overflow, packet end, FIFO available with trigger
> +	 * level
> +	 */
> +	writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
> +	       REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1),
> +	       ir->base + SUNXI_IR_RXINT_REG);
> +
> +	/* Enable IR Module */
> +	tmp = readl(ir->base + SUNXI_IR_CTL_REG);
> +	writel(tmp | REG_CTL_GEN | REG_CTL_RXEN, ir->base + SUNXI_IR_CTL_REG);
> +
> +	return 0;
> +
> +exit_disable_apb_clk:
> +	clk_disable_unprepare(ir->apb_clk);
> +exit_assert_reset:
> +	reset_control_assert(ir->rst);
> +
> +	return ret;
> +}
> +
> +static void sunxi_ir_hw_exit(struct device *dev)
> +{
> +	struct sunxi_ir *ir = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(ir->clk);
> +	clk_disable_unprepare(ir->apb_clk);
> +	reset_control_assert(ir->rst);
> +}
> +
>  static int sunxi_ir_probe(struct platform_device *pdev)
>  {
>  	int ret = 0;
> -	unsigned long tmp = 0;
>  
>  	struct device *dev = &pdev->dev;
>  	struct device_node *dn = dev->of_node;
> @@ -213,43 +277,26 @@ static int sunxi_ir_probe(struct platform_device *pdev)
>  		ir->rst = devm_reset_control_get_exclusive(dev, NULL);
>  		if (IS_ERR(ir->rst))
>  			return PTR_ERR(ir->rst);
> -		ret = reset_control_deassert(ir->rst);
> -		if (ret)
> -			return ret;
>  	}
>  
>  	ret = clk_set_rate(ir->clk, b_clk_freq);
>  	if (ret) {
>  		dev_err(dev, "set ir base clock failed!\n");
> -		goto exit_reset_assert;
> +		return ret;
>  	}
>  	dev_dbg(dev, "set base clock frequency to %d Hz.\n", b_clk_freq);
>  
> -	if (clk_prepare_enable(ir->apb_clk)) {
> -		dev_err(dev, "try to enable apb_ir_clk failed\n");
> -		ret = -EINVAL;
> -		goto exit_reset_assert;
> -	}
> -
> -	if (clk_prepare_enable(ir->clk)) {
> -		dev_err(dev, "try to enable ir_clk failed\n");
> -		ret = -EINVAL;
> -		goto exit_clkdisable_apb_clk;
> -	}
> -
>  	/* IO */
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	ir->base = devm_ioremap_resource(dev, res);
>  	if (IS_ERR(ir->base)) {
> -		ret = PTR_ERR(ir->base);
> -		goto exit_clkdisable_clk;
> +		return PTR_ERR(ir->base);
>  	}
>  
>  	ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW);
>  	if (!ir->rc) {
>  		dev_err(dev, "failed to allocate device\n");
> -		ret = -ENOMEM;
> -		goto exit_clkdisable_clk;
> +		return -ENOMEM;
>  	}
>  
>  	ir->rc->priv = ir;
> @@ -265,6 +312,7 @@ static int sunxi_ir_probe(struct platform_device *pdev)
>  	ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
>  	/* Frequency after IR internal divider with sample period in us */
>  	ir->rc->rx_resolution = (USEC_PER_SEC / (b_clk_freq / 64));
> +	ir->rc->timeout = IR_DEFAULT_TIMEOUT;

Why? This is set from sunxi_ir_set_timeout().

>  	ir->rc->min_timeout = sunxi_ithr_to_usec(b_clk_freq, 0);
>  	ir->rc->max_timeout = sunxi_ithr_to_usec(b_clk_freq, 255);
>  	ir->rc->s_timeout = sunxi_ir_set_timeout;
> @@ -291,41 +339,15 @@ static int sunxi_ir_probe(struct platform_device *pdev)
>  		goto exit_free_dev;
>  	}
>  
> -	/* Enable CIR Mode */
> -	writel(REG_CTL_MD, ir->base+SUNXI_IR_CTL_REG);
> -
> -	/* Set noise threshold and idle threshold */
> -	sunxi_ir_set_timeout(ir->rc, IR_DEFAULT_TIMEOUT);
> -
> -	/* Invert Input Signal */
> -	writel(REG_RXCTL_RPPI, ir->base + SUNXI_IR_RXCTL_REG);
> -
> -	/* Clear All Rx Interrupt Status */
> -	writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
> -
> -	/*
> -	 * Enable IRQ on overflow, packet end, FIFO available with trigger
> -	 * level
> -	 */
> -	writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
> -	       REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1),
> -	       ir->base + SUNXI_IR_RXINT_REG);
> -
> -	/* Enable IR Module */
> -	tmp = readl(ir->base + SUNXI_IR_CTL_REG);
> -	writel(tmp | REG_CTL_GEN | REG_CTL_RXEN, ir->base + SUNXI_IR_CTL_REG);
> +	ret = sunxi_ir_hw_init(dev);
> +	if (ret)
> +		goto exit_free_dev;
>  
>  	dev_info(dev, "initialized sunXi IR driver\n");
>  	return 0;
>  
>  exit_free_dev:
>  	rc_free_device(ir->rc);
> -exit_clkdisable_clk:
> -	clk_disable_unprepare(ir->clk);
> -exit_clkdisable_apb_clk:
> -	clk_disable_unprepare(ir->apb_clk);
> -exit_reset_assert:
> -	reset_control_assert(ir->rst);
>  
>  	return ret;
>  }
> @@ -334,11 +356,9 @@ static int sunxi_ir_remove(struct platform_device *pdev)
>  {
>  	struct sunxi_ir *ir = platform_get_drvdata(pdev);
>  
> -	clk_disable_unprepare(ir->clk);
> -	clk_disable_unprepare(ir->apb_clk);
> -	reset_control_assert(ir->rst);
> -
> +	sunxi_ir_hw_exit(&pdev->dev);
>  	rc_unregister_device(ir->rc);
> +
>  	return 0;
>  }
>  
> -- 
> 2.26.2