Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Amelie Delaunay <amelie.delaunay@foss.st.com>
To:     Kishon Vijay Abraham I <kishon@ti.com>,
        Vinod Koul <vkoul@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>
CC:     <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        Amelie Delaunay <amelie.delaunay@foss.st.com>
Subject: [PATCH v2 1/2] dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells required property
Date:   Thu, 14 Jan 2021 18:13:13 +0100
Message-ID: <20210114171314.18946-2-amelie.delaunay@foss.st.com>
In-Reply-To: <20210114171314.18946-1-amelie.delaunay@foss.st.com>
References: <20210114171314.18946-1-amelie.delaunay@foss.st.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

usbphyc provides a unique clock called ck_usbo_48m.
STM32 USB OTG needs a 48Mhz clock (utmifs_clk48) for Full-Speed operation.
ck_usbo_48m is a possible parent clock for USB OTG 48Mhz clock.

ck_usbo_48m is available as soon as the PLL is enabled.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
No change in v2.
---
 .../devicetree/bindings/phy/phy-stm32-usbphyc.yaml          | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 46df6786727a..4e4da64b8e01 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -51,6 +51,10 @@ properties:
   vdda1v8-supply:
     description: regulator providing 1V8 power supply to the PLL block
 
+  '#clock-cells':
+    description: number of clock cells for ck_usbo_48m consumer
+    const: 0
+
 #Required child nodes:
 
 patternProperties:
@@ -102,6 +106,7 @@ required:
   - "#size-cells"
   - vdda1v1-supply
   - vdda1v8-supply
+  - '#clock-cells'
   - usb-phy@0
   - usb-phy@1
 
@@ -120,6 +125,7 @@ examples:
         vdda1v8-supply = <&reg18>;
         #address-cells = <1>;
         #size-cells = <0>;
+        #clock-cells = <0>;
 
         usbphyc_port0: usb-phy@0 {
             reg = <0>;
-- 
2.17.1