Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750948AbWIMH1K (ORCPT ); Wed, 13 Sep 2006 03:27:10 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751657AbWIMH1K (ORCPT ); Wed, 13 Sep 2006 03:27:10 -0400 Received: from post-23.mail.nl.demon.net ([194.159.73.193]:36806 "EHLO post-23.mail.nl.demon.net") by vger.kernel.org with ESMTP id S1750948AbWIMH1H (ORCPT ); Wed, 13 Sep 2006 03:27:07 -0400 Message-ID: <4507B31A.8010001@rebelhomicide.demon.nl> Date: Wed, 13 Sep 2006 09:28:26 +0200 From: Michiel de Boer User-Agent: Thunderbird 1.5.0.2 (X11/20060501) MIME-Version: 1.0 To: Ben B CC: linux-kernel@vger.kernel.org, davej@codemonkey.org.uk Subject: Re: speedstep-centrino broke References: <20060912193810.GA20226@cactii.net> In-Reply-To: <20060912193810.GA20226@cactii.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24906 Lines: 713 Ben B wrote: > Hi, > > My HP notebook decided that its BIOS upgrade would break > speedstep-centrino, and trying to load the module gives me a "no such > device" error. This is with various combinations of kernel config > relating to cpufreq. Also tried acpi-cpufreq with the same error. > > I suspect that the new bios is broken, but perhaps it's correct and the > linux driver is missing something? > > Anyway, relevent info below. > > Cheers, > Ben > I have the same problem, running kernel 2.6.17.13, and also get the 'No such device' error. This problem doesn't occur when i boot 2.6.16.16, so the behaviour must have been introduced somewhere in between. Does it have anything to do with this thread? http://lkml.org/lkml/2004/8/6/12 Regards, Michiel de Boer Here's my relevant info: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.80GHz stepping : 6 cpu MHz : 1794.431 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe up est tm2 bogomips : 3591.62 dmesg: nterrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: TOSHIBA MK1032GAX, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITADVD-RAM UJ-831S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. libata version 1.20 loaded. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 4760.000 MB/sec raid5: using function: pIII_sse (4760.000 MB/sec) raid6: int32x1 592 MB/s raid6: int32x2 693 MB/s raid6: int32x4 524 MB/s raid6: int32x8 471 MB/s raid6: mmxx1 1639 MB/s raid6: mmxx2 2051 MB/s raid6: sse1x1 1298 MB/s raid6: sse1x2 2138 MB/s raid6: sse2x1 2207 MB/s raid6: sse2x2 2626 MB/s raid6: using algorithm sse2x2 (2626 MB/s) md: raid6 personality registered for level 6 md: multipath personality registered for level -4 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com device-mapper: dm-multipath version 1.0.4 loaded device-mapper: dm-round-robin version 1.0.0 loaded device-mapper: dm-emc version 0.0.3 loaded EDAC MC: Ver: 2.0.0 Sep 9 2006 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 2 Cannot allocate resource for EISA slot 3 Cannot allocate resource for EISA slot 4 EISA: Detected 0 cards. NET: Registered protocol family 1 Using IPI No-Shortcut mode Suspend2 Core. Suspend2 Compression Driver loading. Suspend2 Encryption Driver loading. Suspend2 Swap Writer loading. Suspend2 FileWriter loading. Replacing swsusp. Suspend2 2.2.7.5: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image. Suspend2 2.2.7.5: Resume2 parameter is empty. Suspending will be disabled. Suspend2 2.2.7.5: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending. ACPI wakeup devices: GLAN MPCI T394 MDM0 USB1 USB2 USB3 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 308k freed ReiserFS: hda2: found reiserfs format "3.6" with standard journal input: AT Translated Set 2 keyboard as /class/input/input0 ReiserFS: hda2: using ordered data mode ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda2: checking transaction log (hda2) ReiserFS: hda2: Using r5 hash to sort names ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] tg3.c:v3.59.1 (August 25, 2006) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6 eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:6f:3a:fe eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] NET: Registered protocol family 23 ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 Yenta: CardBus bridge found at 0000:02:06.0 [1025:0051] Yenta O2: res at 0x94/0xD4: ea/00 Yenta O2: enabling read prefetch/write burst Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A Linux agpgart interface v0.101 (c) Dave Jones usbcore: registered new driver usbfs usbcore: registered new driver hub ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1 ipw2200: Copyright(c) 2003-2006 Intel Corporation pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Yenta: ISA IRQ mask 0x0c38, PCI irq 6 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff cs: IO port probe 0x4000-0x4fff: clean. pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection USB Universal Host Controller Interface driver v3.0 Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 input: SynPS/2 Synaptics TouchPad as /class/input/input1 nsc-ircc, chip->init nsc-ircc, Found chip at base=0x04e nsc-ircc, driver loaded (Dag Brattli) nsc_ircc_open(), can't get iobase of 0x2f8 nsc-ircc, Found chip at base=0x04e nsc-ircc, driver loaded (Dag Brattli) nsc_ircc_open(), can't get iobase of 0x2f8 ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected pnp: Device 00:0a disabled. ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 Yenta: CardBus bridge found at 0000:02:06.1 [1025:0051] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Yenta: ISA IRQ mask 0x0838, PCI irq 6 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff cs: IO port probe 0x4000-0x4fff: clean. pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 Yenta: CardBus bridge found at 0000:02:06.3 [1025:0051] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ieee1394: Initialized config rom entry `ip1394' ts: Compaq touchscreen protocol output Yenta: ISA IRQ mask 0x0838, PCI irq 6 Socket status: 30000410 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff cs: IO port probe 0x4000-0x4fff: clean. pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff usb 2-1: new low speed USB device using uhci_hcd and address 2 pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff agpgart: Detected an Intel 855GM Chipset. agpgart: AGP aperture is 256M @ 0xe0000000 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb 2-1: device descriptor read/all, error -71 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:1f.6 disabled ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 pccard: PCMCIA card inserted into slot 2 usb 4-6: new high speed USB device using ehci_hcd and address 3 cs: memory probe 0xd0200000-0xd07fffff: excluding 0xd0200000-0xd025ffff pcmcia: registering new device pcmcia2.0 usb 4-6: configuration #1 chosen from 1 choice hub 4-6:1.0: USB hub found hub 4-6:1.0: 4 ports detected cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0xa00-0xaff: clean. intel8x0_measure_ac97_clock: measured 104808 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0218000-d02187ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.6 to 64 hw_random: RNG not detected usb 2-1: new low speed USB device using uhci_hcd and address 4 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech Optical USB Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 497972k swap on /dev/hda5. Priority:-1 extents:1 across:497972k ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000034bb39] eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) Capability LSM initialized fuse init (API version 7.6) input: PC Speaker as /class/input/input3 NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names PM: Writing back config space on device 0000:02:02.0 at offset c (was ffef0000, writing 0) PM: Writing back config space on device 0000:02:02.0 at offset b (was 165d14e4, writing 511025) PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0, writing 4008) PM: Writing back config space on device 0000:02:02.0 at offset 2 (was 2000000, writing 2000003) PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:02:02.0 at offset 0 (was 165d14e4, writing 165314e4) NET: Registered protocol family 17 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN0] (off) ACPI: Fan [FAN1] (off) ACPI: Thermal Zone [THRM] (51 C) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) lp0: using parport0 (interrupt-driven). lp0: console ready ppdev: user-space parallel port driver ttyS1: LSR safety check engaged! [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6 [drm] Initialized radeon 1.24.0 20060225 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 . # dmidecode 2.8 SMBIOS 2.31 present. 27 structures occupying 1207 bytes. Table at 0x000DF810. Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: ACER Version: 3A20 Release Date: 01/31/2005 Address: 0xE5240 Runtime Size: 110016 bytes ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PC Card (PCMCIA) is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported AGP is supported Smart battery is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: Acer Product Name: TravelMate 8000 Version: Rev 1 Serial Number: xxxxxxxxxxxxx UUID: xxxxxxxxxxxxxx Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: Acer Product Name: TravelMate 8000 Version: Rev 1.0 Serial Number: xxxxxxxxxxxxx Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Acer Type: Notebook Lock: Not Present Version: Rev.1 Serial Number: xxxxxxxxxxxxxx Asset Tag: ................................ Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00001234 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: uFCPGA2 Type: Central Processor Family: Unknown Manufacturer: Intel ID: D6 06 00 00 BF F9 E9 AF Version: Intel(R) Pentium(R) M processor Voltage: 1.2 V External Clock: 400 MHz Max Speed: 1800 MHz Current Speed: 1800 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0005, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 2048 MB Supported Speeds: 60 ns Supported Memory Types: DIMM Memory Module Voltage: 3.3 V Associated Memory Slots: 2 0x0006 0x0007 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM 1 Bank Connections: 0 1 Current Speed: 75 ns Type: DIMM SDRAM Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM 2 Bank Connections: 2 3 Current Speed: 75 ns Type: DIMM SDRAM Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 2048 KB Maximum Size: 2048 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT 1 Internal Connector Type: None External Reference Designator: Parallel External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: U28 Internal Connector Type: None External Reference Designator: PS/2 Mouse External Connector Type: Circular DIN-8 male Port Type: Keyboard Port Handle 0x000C, DMI type 9, 13 bytes System Slot Information Designation: PCMCIA socket 0 Type: 32-bit PC Card (PCMCIA) Current Usage: Unknown Length: Long ID: Adapter 0, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Modem ring resume is supported PME signal is supported Hot-plug devices are supported Handle 0x000D, DMI type 10, 10 bytes On Board Device 1 Information Type: Video Status: Disabled Description: ATI M11 On Board Device 2 Information Type: Sound Status: Disabled Description: AC97 Audio On Board Device 3 Information Type: Other Status: Disabled Description: TI TSB43AB21 IEEE-1394 Controller Handle 0x000E, DMI type 11, 5 bytes OEM Strings String 1: SMBIOS 2.3 String 2: Customer Reference Platform Handle 0x000F, DMI type 12, 5 bytes System Configuration Options Option 1: No Jumper On This Platform. Handle 0x0010, DMI type 15, 29 bytes System Event Log Area Length: 0 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: Memory-mapped physical 32-bit address Access Address: 0x00000000 Status: Invalid, Not Full Change Token: 0x00000000 Header Format: Type 1 Supported Log Type Descriptors: 3 Descriptor 1: POST error Data Format 1: POST results bitmap Descriptor 2: Single-bit ECC memory error Data Format 2: Multiple-event Descriptor 3: Multi-bit ECC memory error Data Format 3: Multiple-event Handle 0x0011, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 3 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0012, DMI type 17, 27 bytes Memory Device Array Handle: 0x0011 Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: DIMM 0 Bank Locator: Bank 0, 1 Type: SRAM Type Detail: Synchronous Speed: 333 MHz (3.0 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0013, DMI type 17, 27 bytes Memory Device Array Handle: 0x0011 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: 1 Locator: DIMM 1 Bank Locator: Bank 2, 3 Type: SRAM Type Detail: Synchronous Speed: 333 MHz (3.0 ns) Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0014, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Array Handle: 0x0011 Partition Width: 0 Handle 0x0015, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0012 Memory Array Mapped Address Handle: 0x0014 Partition Row Position: 1 Interleave Position: 1 Handle 0x0016, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x0013 Memory Array Mapped Address Handle: 0x0014 Partition Row Position: 1 Interleave Position: 1 Handle 0x0017, DMI type 21, 7 bytes Built-in Pointing Device Type: Mouse Interface: PS/2 Buttons: 2 Handle 0x0018, DMI type 22, 26 bytes Portable Battery Location: Right Side Manufacturer: Sanyo Name: Sanyo Chemistry: Lithium Ion Design Capacity: 4400 mWh Design Voltage: 14800 mV SBDS Version: Bat123 Maximum Error: 100% SBDS Serial Number: 04D2 SBDS Manufacture Date: 1985-08-25 OEM-specific Information: 0x00000000 Handle 0x0019, DMI type 32, 20 bytes System Boot Information Status: Handle 0x001A, DMI type 127, 4 bytes End Of Table - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/