Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH] arm64: dts: rockchip: cleanup cpu_thermal node of
 rk3399-rock960.dts
From:   Johan Jonker <jbx6244@gmail.com>
To:     heiko@sntech.de
Cc:     robh+dt@kernel.org, linux-rockchip@lists.infradead.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
References: <20210118163306.8693-1-jbx6244@gmail.com>
Message-ID: <c6dfa1a7-4a61-2e80-fe43-add1af611395@gmail.com>
Date:   Mon, 18 Jan 2021 17:48:34 +0100
User-Agent: Mozilla/5.0 (X11; Linux i686; rv:68.0) Gecko/20100101
 Thunderbird/68.11.0
MIME-Version: 1.0
In-Reply-To: <20210118163306.8693-1-jbx6244@gmail.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi,

Sorry.
This can go in the bin...
It needs more cleanup...
See question below.

On 1/18/21 5:33 PM, Johan Jonker wrote:
> The cpu_thermal node in the rk3399-rock960.dts file does not
> reference &cpu_thermal directly to add the board-specific parts,
> but also repeats all the SoC default properties.
> Clean the whole thing up and fix alignment.
> Place node in the correct alphabetical order.
> 
> Suggested-by: Robin Murphy <robin.murphy@arm.com>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rock960.dts | 75 ++++++++++++-------------
>  1 file changed, 36 insertions(+), 39 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
> index b20774081..bff8a73d9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
> @@ -63,6 +63,42 @@
>  
>  };
>  
> +&cpu_thermal {
> +	polling-delay-passive = <100>;
> +	polling-delay = <1000>;
> +	thermal-sensors = <&tsadc 0>;
> +	sustainable-power = <1550>;
> +
> +	trips {
> +		cpu_alert0: cpu_alert0 {
> +			temperature = <65000>;
> +			hysteresis = <2000>;
> +			type = "passive";
> +		};
> +
> +		cpu_alert1: cpu_alert1 {
> +			temperature = <75000>;
> +			hysteresis = <2000>;
> +			type = "passive";
> +		};
> +
> +		cpu_crit: cpu_crit {
> +			temperature = <95000>;
> +			hysteresis = <2000>;
> +			type = "critical";
> +		};
> +	};
> +
> +	cooling-maps {
> +		map0 {
> +			trip = <&cpu_alert1>;
> +			cooling-device =
> +				<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +				<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +		};
> +	};
> +};
> +
>  &pcie0 {
>  	ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
>  };
> @@ -125,45 +161,6 @@
>  	status = "okay";
>  };
>  
> -&thermal_zones {
> -	cpu_thermal: cpu-thermal {
> -		polling-delay-passive = <100>;
> -		polling-delay = <1000>;
> -		thermal-sensors = <&tsadc 0>;
> -		sustainable-power = <1550>;
> -
> -		trips {
> -			cpu_alert0: cpu_alert0 {
> -				    temperature = <65000>;
> -				    hysteresis = <2000>;
> -				    type = "passive";
> -			};
> -
> -			cpu_alert1: cpu_alert1 {
> -				    temperature = <75000>;
> -				    hysteresis = <2000>;
> -				    type = "passive";
> -			};
> -
> -			cpu_crit: cpu_crit {
> -				  temperature = <95000>;
> -				  hysteresis = <2000>;
> -				  type = "critical";
> -			};
> -		};
> -
> -		cooling-maps {

> -			     map0 {
> -
> -			     trip = <&cpu_alert1>;

The trip property points to "cpu_alert1", while in rk3399.dtsi that is
"&cpu_alert0"
What is correct here?


> -			     cooling-device =
> -					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> -					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> -			};
> -		};
> -	};
> -};
> -
>  &usbdrd_dwc3_0 {
>  	dr_mode = "otg";
>  };
> 


				map0 {
					trip = <&cpu_alert0>;
					cooling-device =
						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};