Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To:     linux-amlogic@lists.infradead.org, netdev@vger.kernel.org
Cc:     davem@davemloft.net, kuba@kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        Martijn van Deventer <martijn@martijnvandeventer.nl>
Subject: [PATCH] net: stmmac: dwmac-meson8b: fix the RX delay validation
Date:   Tue, 19 Jan 2021 21:24:24 +0100
Message-Id: <20210119202424.591349-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

When has_prg_eth1_rgmii_rx_delay is true then we support RX delays
between 0ps and 3000ps in 200ps steps. Swap the validation of the RX
delay based on the has_prg_eth1_rgmii_rx_delay flag so the 200ps check
is now applied correctly on G12A SoCs (instead of only allow 0ps or
2000ps on G12A, but 0..3000ps in 200ps steps on older SoCs which don't
support that).

Fixes: de94fc104d58ea ("net: stmmac: dwmac-meson8b: add support for the RGMII RX delay on G12A")
Reported-by: Martijn van Deventer <martijn@martijnvandeventer.nl>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Many thanks to Martijn for this excellent catch and for reporting this
issue (off-list)!


 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 55152d7ba99a..848e5c37746b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -443,16 +443,16 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
 	}
 
 	if (dwmac->data->has_prg_eth1_rgmii_rx_delay) {
-		if (dwmac->rx_delay_ps != 0 && dwmac->rx_delay_ps != 2000) {
+		if (dwmac->rx_delay_ps > 3000 || dwmac->rx_delay_ps % 200) {
 			dev_err(dwmac->dev,
-				"The only allowed RGMII RX delays values are: 0ps, 2000ps");
+				"The RGMII RX delay range is 0..3000ps in 200ps steps");
 			ret = -EINVAL;
 			goto err_remove_config_dt;
 		}
 	} else {
-		if (dwmac->rx_delay_ps > 3000 || dwmac->rx_delay_ps % 200) {
+		if (dwmac->rx_delay_ps != 0 && dwmac->rx_delay_ps != 2000) {
 			dev_err(dwmac->dev,
-				"The RGMII RX delay range is 0..3000ps in 200ps steps");
+				"The only allowed RGMII RX delays values are: 0ps, 2000ps");
 			ret = -EINVAL;
 			goto err_remove_config_dt;
 		}
-- 
2.30.0