Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: Michal Simek <monstr@monstr.eu>
From:   Michal Simek <michal.simek@xilinx.com>
To:     linux-kernel@vger.kernel.org, monstr@monstr.eu,
        michal.simek@xilinx.com, git@xilinx.com
Cc:     Kalyani Akula <kalyani.akula@xilinx.com>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] arm64: dts: zynqmp: Enable and Wire DP
Date:   Thu, 21 Jan 2021 13:36:04 +0100
Message-Id: <cover.1611232558.git.michal.simek@xilinx.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi,

I am updating DT patches which were there part of DP v11 series sent by
Laurent in past [1]. Patches have been removed in v12 [2].
The series is rebased on the top of [3] which wired si5341 clock chip.

[1] http://lore.kernel.org/r/20200318153728.25843-1-laurent.pinchart@ideasonboard.com
[2] http://lore.kernel.org/r/20200718001347.25451-1-laurent.pinchart@ideasonboard.com
[3] http://lore.kernel.org/r/cover.1611224800.git.michal.simek@xilinx.com

Thanks,
Michal


Laurent Pinchart (2):
  arm64: dts: zynqmp: Add DPDMA node
  arm64: dts: zynqmp: Wire up the DisplayPort subsystem

Michal Simek (1):
  arm64: dts: zynqmp: Add DisplayPort subsystem

 .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 10 ++++++
 .../boot/dts/xilinx/zynqmp-zcu100-revC.dts    | 31 ++++++++++++++++++
 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    | 10 ++++++
 .../boot/dts/xilinx/zynqmp-zcu104-revA.dts    | 11 +++++++
 .../boot/dts/xilinx/zynqmp-zcu104-revC.dts    | 11 +++++++
 .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    | 11 +++++++
 .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    | 11 +++++++
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 32 +++++++++++++++++++
 8 files changed, 127 insertions(+)

-- 
2.30.0