Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: Michal Simek <monstr@monstr.eu>
From:   Michal Simek <michal.simek@xilinx.com>
To:     linux-kernel@vger.kernel.org, monstr@monstr.eu,
        michal.simek@xilinx.com, git@xilinx.com
Cc:     Krzysztof Kozlowski <krzk@kernel.org>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 03/12] arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
Date:   Thu, 21 Jan 2021 11:26:51 +0100
Message-Id: <b93f13297684704a60e8d7274009a20aa98d14f7.1611224800.git.michal.simek@xilinx.com>
In-Reply-To: <cover.1611224800.git.michal.simek@xilinx.com>
References: <cover.1611224800.git.michal.simek@xilinx.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Enable si5341 driver is the main chip for providing preprogrammed clocks
for the whole platform.

 # cat /sys/kernel/debug/clk/clk_summary
...
 refhdmi                              1        1        0   114285000          0     0  50000
    xtal_0                            0        0        0   114285000          0     0  50000
       pll_0                          0        0        0 40731174000000          0     0  50000
          clk1_0                      0        0        0    27000000          0     0  50000
          clk0_0                      0        0        0    27000000          0     0  50000
 ref48M                               1        2        0    48000000          0     0  50000
    si5341                            0        4        0    14000000          0     0  50000
       clock-generator.N4             0        0        0           0          0     0  50000
       clock-generator.N3             0        1        0   733260000          0     0  50000
          clock-generator.9           0        1        0    33330000          0     0  50000
       clock-generator.N2             0        1        0   104000000          0     0  50000
          clock-generator.2           0        1        0    26000000          0     0  50000
       clock-generator.N1             0        2        0   594000000          0     0  50000
          clock-generator.7           0        1        0    74250000          0     0  50000
          clock-generator.0           0        1        0    27000000          0     0  50000
       clock-generator.N0             0        4        0  1000000000          0     0  50000
          clock-generator.8           0        0        0           0          0     0  50000
          clock-generator.6           0        1        0   125000000          0     0  50000
          clock-generator.5           0        1        0   100000000          0     0  50000
          clock-generator.4           0        1        0   100000000          0     0  50000
          clock-generator.3           0        1        0   125000000          0     0  50000
          clock-generator.1           0        0        0           0          0     0  50000
...

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2: None

 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    | 56 ++++++++++++++++++-
 .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    | 45 +++++++++++++++
 .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    | 46 ++++++++++++++-
 3 files changed, 145 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 5ff7ab665374..68c2ad30d62d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -133,6 +133,13 @@ ina226-u75 {
 		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
 	};
 
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
 	refhdmi: refhdmi {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -489,9 +496,56 @@ i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 			si5341: clock-generator@36 { /* SI5341 - u69 */
+				compatible = "silabs,si5341";
 				reg = <0x36>;
-			};
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
 
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_4: out@4 {
+					/* refclk4 for PS-GT, used for PCIE slot */
+					reg = <4>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 for PS-GT, used for PCIE */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_7: out@7 {
+					/* refclk7 PL CLK74 */
+					reg = <7>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
 		};
 		i2c@2 {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 7910ac125101..a29ff20090ce 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -133,6 +133,13 @@ ina226-u75 {
 		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
 	};
 
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
 	refhdmi: refhdmi {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -488,7 +495,45 @@ i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 			si5341: clock-generator@36 { /* SI5341 - u69 */
+				compatible = "silabs,si5341";
 				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_7: out@7 {
+					/* refclk7 PL CLK74 */
+					reg = <7>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
 			};
 
 		};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index d9a8fdbbcae8..92b3cee62d11 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -116,6 +116,13 @@ ina226-u79 {
 		compatible = "iio-hwmon";
 		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
 	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
 };
 
 &dcc {
@@ -374,9 +381,46 @@ i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 			si5341: clock-generator@36 { /* SI5341 - u46 */
+				compatible = "silabs,si5341";
 				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 PL CLK100 */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
 			};
-
 		};
 		i2c@2 {
 			#address-cells = <1>;
-- 
2.30.0