Received: by 2002:a05:6a10:8c0a:0:0:0:0 with SMTP id go10csp3457970pxb; Mon, 25 Jan 2021 17:25:59 -0800 (PST) X-Google-Smtp-Source: ABdhPJwEiLHuA8EI9IOKEktg0+LpD46nTDMGLYOvXD++SEOfo4rnKhTRMdolRKPac3KmMkzXh8EH X-Received: by 2002:aa7:d8c6:: with SMTP id k6mr2697940eds.265.1611624359312; Mon, 25 Jan 2021 17:25:59 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1611624359; cv=none; d=google.com; s=arc-20160816; b=DoRuJKTt4SqTddGwYQ/Nif30kz1PeJmEdmCsIUlclgtDKImOasKQWQRydA9DB5gjoY sGwh2NyEOpiHLbNzob9ibY5rSm+Dwbj6cNL8XRlzC5ACL1ZjOkDpMgz86JNJk7NJvbZt scNbCKvNVFiBg3kyhbhJb5aoMl/O4rMmNjWIzpIVHJHa8ettRKKdqYq4tqNCLrDtSkhj DsaCL/oQBiEyF0tEBrf/8Cy9PfVD6ucjsQZPCOGQNXmycC5lJpKtJp+SH/sgSlOVUcHS CfJfMuziBI2ovq9TBLZpf0Jj8Y6UMr2+ii68gj/K6rRO+IR6757bqU9foN8TZq5VoS30 eyFQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:message-id:date:subject:cc:to:from:ironport-sdr :ironport-sdr; bh=YT09kLMVDg+66+ivNJ5GT2c3E1W8ZGM1wIpPJeiV87M=; b=nLJZoYaCQwX+Z1xaQ59QZxW9q+y4KBokJkhLPHFkB5y7sqCAdOCQEhrfNWCaeyLswh SS/xvipbA8eBJa+AsOiNzMKB3QGSqWMzxqTQRhkNlqin/FLt0REDI7MA6luyj3d0mb4d cdxPs/XTE3UHy25bTtpephrsv/9edwr7tlqfKhz6/5U8FZoFBqr3suIJrPNml1xxlFOc LeEhpCLiOSebOpMOkG8wK4lhkKWgiB+bcOsEYvrAEAqE/TLqRuL0pq56gScJ9N07hleu ZZwqyxfdw99X0U0mNHYY8C8qbkuSgmDFVNn5zAHO2HVGWUEIUtI5y8ZeLgnt3SMI87XR 1Mgg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=intel.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id c22si6623085ejd.523.2021.01.25.17.24.59; Mon, 25 Jan 2021 17:25:59 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=intel.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726340AbhAYHGG (ORCPT + 99 others); Mon, 25 Jan 2021 02:06:06 -0500 Received: from mga14.intel.com ([192.55.52.115]:14294 "EHLO mga14.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726610AbhAYHEs (ORCPT ); Mon, 25 Jan 2021 02:04:48 -0500 IronPort-SDR: h3cgrG1tEORqdoI/283WoBEW+FBEcFBIW3GW4DJDklFf8U76pFNOrF7jB5+HD+KoZVcc2VXAUK irJOU1SA+jyg== X-IronPort-AV: E=McAfee;i="6000,8403,9874"; a="178897346" X-IronPort-AV: E=Sophos;i="5.79,372,1602572400"; d="scan'208";a="178897346" Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by fmsmga103.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 24 Jan 2021 23:03:02 -0800 IronPort-SDR: 3wvmitnMf8oV92Pvay/kJ2ElDsPMFRJYR3rpBXYVVJRtAe4UZE0fZlFCg5q4Ncza8C8IDwJmLJ XfHfM5yOEw1A== X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.79,372,1602572400"; d="scan'208";a="471907582" Received: from kbl-ppc.sh.intel.com ([10.239.159.163]) by fmsmga001.fm.intel.com with ESMTP; 24 Jan 2021 23:03:00 -0800 From: Jin Yao To: acme@kernel.org, jolsa@kernel.org, peterz@infradead.org, mingo@redhat.com, alexander.shishkin@linux.intel.com Cc: Linux-kernel@vger.kernel.org, ak@linux.intel.com, kan.liang@intel.com, yao.jin@intel.com, Jin Yao Subject: [PATCH 1/2] perf script: Support filtering by hex address Date: Mon, 25 Jan 2021 07:27:49 +0800 Message-Id: <20210124232750.19170-1-yao.jin@linux.intel.com> X-Mailer: git-send-email 2.17.1 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Perf-script supports '-S' or '--symbol' options to only list the trace records in given symbols. Symbol is typically a name or hex address. If it's hex address, it is the start address of one symbol. While it would be useful if we can filter trace records by any hex address (not only the start address of symbol). So now we support filtering trace records by more conditions, such as: - symbol name - start address of symbol - any hexadecimal address - address range The comparison order is defined as: 1. symbol name comparison 2. symbol start address comparison. 3. any hexadecimal address comparison. 4. address range comparison. Let's see some examples: root@kbl-ppc:~# ./perf script -S 0xffffffff9ca77308 perf 18123 [000] 6142863.075104: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [000] 6142863.075107: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [000] 6142863.075108: 10 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [001] 6142863.075156: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [001] 6142863.075158: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [001] 6142863.075159: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [002] 6142863.075202: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [002] 6142863.075204: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [002] 6142863.075205: 16 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [003] 6142863.075250: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [003] 6142863.075252: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [003] 6142863.075253: 16 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) Filter the traced records by hex address 0xffffffff9ca77308. Easy to use, we support the hex address without '0x' prefix, e.g. ./perf script -S ffffffff9ca77308 It has the same effect. We also support to filter trace records by a address range. root@kbl-ppc:~# ./perf script -S ffffffff9ca77304 --addr-range 16 perf 18123 [000] 6142863.075104: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [000] 6142863.075107: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [000] 6142863.075108: 10 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [000] 6142863.075109: 273 cycles: ffffffff9ca7730a native_write_msr+0xa ([kernel.kallsyms]) perf 18123 [001] 6142863.075156: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [001] 6142863.075158: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [001] 6142863.075159: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [001] 6142863.075160: 456 cycles: ffffffff9ca7730f native_write_msr+0xf ([kernel.kallsyms]) perf 18123 [002] 6142863.075202: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [002] 6142863.075204: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [002] 6142863.075205: 16 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [002] 6142863.075206: 436 cycles: ffffffff9ca7730f native_write_msr+0xf ([kernel.kallsyms]) perf 18123 [003] 6142863.075250: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [003] 6142863.075252: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [003] 6142863.075253: 16 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [003] 6142863.075254: 436 cycles: ffffffff9ca7730f native_write_msr+0xf ([kernel.kallsyms]) perf 18123 [004] 6142863.075299: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [004] 6142863.075301: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [004] 6142863.075302: 16 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [004] 6142863.075303: 431 cycles: ffffffff9ca7730f native_write_msr+0xf ([kernel.kallsyms]) perf 18123 [005] 6142863.075348: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [005] 6142863.075349: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [005] 6142863.075351: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [005] 6142863.075352: 454 cycles: ffffffff9ca7730f native_write_msr+0xf ([kernel.kallsyms]) perf 18123 [006] 6142863.075390: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [006] 6142863.075392: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [006] 6142863.075393: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [006] 6142863.075394: 459 cycles: ffffffff9ca7730f native_write_msr+0xf ([kernel.kallsyms]) perf 18123 [007] 6142863.075438: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [007] 6142863.075440: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [007] 6142863.075441: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [007] 6142863.075442: 466 cycles: ffffffff9ca7730f native_write_msr+0xf ([kernel.kallsyms]) Filter the traced records from address range [0xffffffff9ca77304, 0xffffffff9ca77304 + 15]. Signed-off-by: Jin Yao --- tools/perf/Documentation/perf-script.txt | 19 +++++++++++++ tools/perf/builtin-script.c | 2 ++ tools/perf/util/event.c | 36 ++++++++++++++++++++++++ tools/perf/util/symbol_conf.h | 1 + 4 files changed, 58 insertions(+) diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt index 44d37210fc8f..0ef2261baeb9 100644 --- a/tools/perf/Documentation/perf-script.txt +++ b/tools/perf/Documentation/perf-script.txt @@ -422,9 +422,28 @@ include::itrace.txt[] Only consider the listed symbols. Symbols are typically a name but they may also be hexadecimal address. + The hexadecimal address may be the start address of a symbol or + any other address to filter the trace records. + For example, to select the symbol noploop or the address 0x4007a0: perf script --symbols=noploop,0x4007a0 + Support filtering trace records by symbol name, start address of + symbol, any hexadecimal address and address range. + + The comparison order is: + 1. symbol name comparison + 2. symbol start address comparison. + 3. any hexadecimal address comparison. + 4. address range comparison (see --addr-range). + +--addr-range:: + Use with -S or --symbols to list traced records within address range. + + For example, to list the traced records within the address range + [0x4007a0, 0x0x4007a9]: + perf script -S 0x4007a0 --addr-range 10 + --call-trace:: Show call stream for intel_pt traces. The CPUs are interleaved, but can be filtered with -C. diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index edacfa98d073..e0feda33dbb9 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -3525,6 +3525,8 @@ int cmd_script(int argc, const char **argv) "system-wide collection from all CPUs"), OPT_STRING('S', "symbols", &symbol_conf.sym_list_str, "symbol[,symbol...]", "only consider these symbols"), + OPT_INTEGER(0, "addr-range", &symbol_conf.addr_range, + "Use with -S to list traced records within address range"), OPT_CALLBACK_OPTARG(0, "insn-trace", &itrace_synth_opts, NULL, NULL, "Decode instructions from itrace", parse_insn_trace), OPT_CALLBACK_OPTARG(0, "xed", NULL, NULL, NULL, diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index fbe8578e4c47..525b859cb445 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -645,6 +645,22 @@ struct symbol *thread__find_symbol_fb(struct thread *thread, u8 cpumode, return al->sym; } +static bool check_address_range(struct strlist *sym_list, int addr_range, + struct addr_location *al) +{ + struct str_node *pos; + char *endptr; + u64 addr, al_addr = al->map->unmap_ip(al->map, al->addr); + + strlist__for_each_entry(pos, sym_list) { + addr = strtoull(pos->s, &endptr, 16); + if (al_addr >= addr && al_addr < addr + addr_range) + return true; + } + + return false; +} + /* * Callers need to drop the reference to al->thread, obtained in * machine__findnew_thread() @@ -709,6 +725,26 @@ int machine__resolve(struct machine *machine, struct addr_location *al, ret = strlist__has_entry(symbol_conf.sym_list, al_addr_str); } + if (!ret && al->map) { + snprintf(al_addr_str, sz, "0x%"PRIx64, + al->map->unmap_ip(al->map, al->addr)); + ret = strlist__has_entry(symbol_conf.sym_list, + al_addr_str); + if (!ret) { + /* Check for hex without "0x" prefix */ + snprintf(al_addr_str, sz, "%"PRIx64, + al->map->unmap_ip(al->map, al->addr)); + ret = strlist__has_entry(symbol_conf.sym_list, + al_addr_str); + } + + if (!ret && symbol_conf.addr_range) { + ret = check_address_range(symbol_conf.sym_list, + symbol_conf.addr_range, + al); + } + } + if (!ret) al->filtered |= (1 << HIST_FILTER__SYMBOL); } diff --git a/tools/perf/util/symbol_conf.h b/tools/perf/util/symbol_conf.h index b18f9c8dbb75..07e247cdb43c 100644 --- a/tools/perf/util/symbol_conf.h +++ b/tools/perf/util/symbol_conf.h @@ -75,6 +75,7 @@ struct symbol_conf { int res_sample; int pad_output_len_dso; int group_sort_idx; + int addr_range; }; extern struct symbol_conf symbol_conf; -- 2.17.1