Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Anant Thazhemadam <anant.thazhemadam@gmail.com>
To:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Anant Thazhemadam <anant.thazhemadam@gmail.com>
Cc:     linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 07/12] usb: misc: isight_firmware: update to use usb_control_msg_send()
Date:   Wed, 27 Jan 2021 00:03:58 +0530
Message-Id: <20210126183403.911653-8-anant.thazhemadam@gmail.com>
In-Reply-To: <20210126183403.911653-1-anant.thazhemadam@gmail.com>
References: <20210126183403.911653-1-anant.thazhemadam@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The newer usb_control_msg_{send|recv}() API are an improvement on the
existing usb_control_msg() as it ensures that a short read/write is treated
as an error, data can be used off the stack, and raw usb pipes need not be
created in the calling functions.
For this reason, the instances of usb_control_msg() have been replaced with
usb_control_msg_send(), and return value checking has also been
appropriately enforced.

Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
---
 drivers/usb/misc/isight_firmware.c | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index 4d30095d6ad2..1bd14a431f6c 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -37,13 +37,10 @@ static int isight_firmware_load(struct usb_interface *intf,
 	struct usb_device *dev = interface_to_usbdev(intf);
 	int llen, len, req, ret = 0;
 	const struct firmware *firmware;
-	unsigned char *buf = kmalloc(50, GFP_KERNEL);
+	unsigned char buf[50];
 	unsigned char data[4];
 	const u8 *ptr;
 
-	if (!buf)
-		return -ENOMEM;
-
 	if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
 		printk(KERN_ERR "Unable to load isight firmware\n");
 		ret = -ENODEV;
@@ -53,11 +50,11 @@ static int isight_firmware_load(struct usb_interface *intf,
 	ptr = firmware->data;
 
 	buf[0] = 0x01;
-	if (usb_control_msg
-	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
-	     300) != 1) {
+	ret = usb_control_msg_send(dev, 0, 0xa0, 0x40, 0xe600,
+				   0, &buf, 1, 300, GFP_KERNEL);
+	if (ret != 0) {
 		printk(KERN_ERR
-		       "Failed to initialise isight firmware loader\n");
+			"Failed to initialise isight firmware loader\n");
 		ret = -ENODEV;
 		goto out;
 	}
@@ -82,15 +79,15 @@ static int isight_firmware_load(struct usb_interface *intf,
 				ret = -ENODEV;
 				goto out;
 			}
-			memcpy(buf, ptr, llen);
+			memcpy(&buf, ptr, llen);
 
 			ptr += llen;
 
-			if (usb_control_msg
-			    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
-			     buf, llen, 300) != llen) {
+			ret = usb_control_msg_send(dev, 0, 0xa0, 0x40, req, 0,
+						   &buf, llen, 300, GFP_KERNEL);
+			if (ret != 0) {
 				printk(KERN_ERR
-				       "Failed to load isight firmware\n");
+					"Failed to load isight firmware\n");
 				ret = -ENODEV;
 				goto out;
 			}
@@ -99,15 +96,14 @@ static int isight_firmware_load(struct usb_interface *intf,
 	}
 
 	buf[0] = 0x00;
-	if (usb_control_msg
-	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
-	     300) != 1) {
+	ret = usb_control_msg_send(dev, 0, 0xa0, 0x40, 0xe600,
+				   0, &buf, 1, 300, GFP_KERNEL);
+	if (ret != 0) {
 		printk(KERN_ERR "isight firmware loading completion failed\n");
 		ret = -ENODEV;
 	}
 
 out:
-	kfree(buf);
 	release_firmware(firmware);
 	return ret;
 }
-- 
2.25.1