Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 27 Jan 2021 21:44:33 +0800
From:   carlis <zhangxuezhi3@gmail.com>
To:     Greg KH <gregkh@linuxfoundation.org>
Cc:     devel@driverdev.osuosl.org, linux-fbdev@vger.kernel.org,
        mh12gx2825@gmail.com, oliver.graute@kococonnector.com,
        linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
        sbrivio@redhat.com, colin.king@canonical.com,
        zhangxuezhi1@yulong.com
Subject: Re: [PATCH v9] staging: fbtft: add tearing signal detect
Message-ID: <20210127214433.00005c15@gmail.com>
In-Reply-To: <YBFmg3yHlORg1mhf@kroah.com>
References: <1611752257-150851-1-git-send-email-zhangxuezhi3@gmail.com>
        <YBFmg3yHlORg1mhf@kroah.com>
Organization: Tyzmig-ryrjum-8kedto
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Wed, 27 Jan 2021 14:11:31 +0100
Greg KH <gregkh@linuxfoundation.org> wrote:

> On Wed, Jan 27, 2021 at 08:57:37PM +0800, Carlis wrote:
> > From: zhangxuezhi <zhangxuezhi1@yulong.com>
> > 
> > For st7789v ic,add tearing signal detect to avoid screen tearing  
> 
> I need a much better changelog description here please.
> 
> > 
> > Signed-off-by: zhangxuezhi <zhangxuezhi1@yulong.com>
> > ---
> > v9: change pr_* to dev_*
> > ---  
> 
> What changed in all of your previous versions?  All of them should be
> listed here, right?
> 
> 
> 
> >  drivers/staging/fbtft/fb_st7789v.c | 132
> > ++++++++++++++++++++++++++++++++++++- drivers/staging/fbtft/fbtft.h
> >      |   1 + 2 files changed, 132 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/staging/fbtft/fb_st7789v.c
> > b/drivers/staging/fbtft/fb_st7789v.c index 3a280cc..9aa2f36 100644
> > --- a/drivers/staging/fbtft/fb_st7789v.c
> > +++ b/drivers/staging/fbtft/fb_st7789v.c
> > @@ -9,9 +9,12 @@
> >  #include <linux/delay.h>
> >  #include <linux/init.h>
> >  #include <linux/kernel.h>
> > +#include <linux/mutex.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/completion.h>
> >  #include <linux/module.h>
> >  #include <video/mipi_display.h>
> > -
> > +#include <linux/gpio/consumer.h>
> >  #include "fbtft.h"
> >  
> >  #define DRVNAME "fb_st7789v"
> > @@ -66,6 +69,32 @@ enum st7789v_command {
> >  #define MADCTL_MX BIT(6) /* bitmask for column address order */
> >  #define MADCTL_MY BIT(7) /* bitmask for page address order */
> >  
> > +#define SPI_PANEL_TE_TIMEOUT	400  
> 
> What is the units here?  Where did this value come from?

hi,the units is msecs,and i got this value from a qcom mdp spi
drivers,and i will add the notes you need in the patch v10
> 
> > +static struct mutex te_mutex;/*mutex for tearing line*/  
> 
> Does that look correct???
> 
> thanks,
> 
> greg k-h