Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: mdalam=codeaurora.org@mg.codeaurora.org
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Wed, 27 Jan 2021 23:56:22 +0530
From:   mdalam@codeaurora.org
To:     Vinod Koul <vkoul@kernel.org>
Cc:     corbet@lwn.net, agross@kernel.org, bjorn.andersson@linaro.org,
        dan.j.williams@intel.com, dmaengine@vger.kernel.org,
        linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, sricharan@codeaurora.org,
        mdalam=codeaurora.org@codeaurora.org
Subject: Re: [PATCH] dmaengine: qcom: bam_dma: Add LOCK and UNLOCK flag bit
 support
In-Reply-To: <20210119164511.GE2771@vkoul-mobl>
References: <1608215842-15381-1-git-send-email-mdalam@codeaurora.org>
 <20201221092355.GA3323@vkoul-mobl>
 <efcc74bbdf36b4ddbf764eb6b4ed99f2@codeaurora.org>
 <f7de0117c8ff2e61c09f58acdea0e5b0@codeaurora.org>
 <20210112101056.GI2771@vkoul-mobl>
 <e3cf7c4fc02c54d17fd2fd213f39005b@codeaurora.org>
 <20210115055806.GE2771@vkoul-mobl>
 <97ce29b230164a5848a38f6448d1be60@codeaurora.org>
 <20210119164511.GE2771@vkoul-mobl>
Message-ID: <534308caab7c18730ad0cc25248d116f@codeaurora.org>
User-Agent: Roundcube Webmail/1.3.9
Precedence: bulk

On 2021-01-19 22:15, Vinod Koul wrote:
> On 18-01-21, 09:21, mdalam@codeaurora.org wrote:
>> On 2021-01-15 11:28, Vinod Koul wrote:
>> > On 14-01-21, 01:20, mdalam@codeaurora.org wrote:
>> > > On 2021-01-12 15:40, Vinod Koul wrote:
>> > > > On 12-01-21, 15:01, mdalam@codeaurora.org wrote:
>> > > > > On 2020-12-21 23:03, mdalam@codeaurora.org wrote:
>> > > > > > On 2020-12-21 14:53, Vinod Koul wrote:
>> > > > > > > Hello,
>> > > > > > >
>> > > > > > > On 17-12-20, 20:07, Md Sadre Alam wrote:
>> > > > > > > > This change will add support for LOCK & UNLOCK flag bit support
>> > > > > > > > on CMD descriptor.
>> > > > > > > >
>> > > > > > > > If DMA_PREP_LOCK flag passed in prep_slave_sg then requester of this
>> > > > > > > > transaction wanted to lock the DMA controller for this transaction so
>> > > > > > > > BAM driver should set LOCK bit for the HW descriptor.
>> > > > > > > >
>> > > > > > > > If DMA_PREP_UNLOCK flag passed in prep_slave_sg then requester
>> > > > > > > > of this
>> > > > > > > > transaction wanted to unlock the DMA controller.so BAM driver
>> > > > > > > > should set
>> > > > > > > > UNLOCK bit for the HW descriptor.
>> > > > > > >
>> > > > > > > Can you explain why would we need to first lock and then unlock..? How
>> > > > > > > would this be used in real world.
>> > > > > > >
>> > > > > > > I have read a bit of documentation but is unclear to me. Also should
>> > > > > > > this be exposed as an API to users, sounds like internal to driver..?
>> > > > > > >
>> > > > > >
>> > > > > > IPQ5018 SoC having only one Crypto Hardware Engine. This Crypto Hardware
>> > > > > > Engine
>> > > > > > will be shared between A53 core & ubi32 core. There is two separate
>> > > > > > driver dedicated
>> > > > > > to A53 core and ubi32 core. So to use Crypto Hardware Engine
>> > > > > > parallelly for encryption/description
>> > > > > > we need bam locking mechanism. if one driver will submit the request
>> > > > > > for encryption/description
>> > > > > > to Crypto then first it has to set LOCK flag bit on command descriptor
>> > > > > > so that other pipes will
>> > > > > > get locked.
>> > > > > >
>> > > > > > The Pipe Locking/Unlocking will be only on command-descriptor. Upon
>> > > > > > encountering a command descriptor
>> > > >
>> > > > Can you explain what is a cmd descriptor?
>> > >
>> > >   In BAM pipe descriptor structure there is a field called CMD
>> > > (Command
>> > > descriptor).
>> > >   CMD allows the SW to create descriptors of type Command which does
>> > > not
>> > > generate any data transmissions
>> > >   but configures registers in the Peripheral (write operations, and
>> > > read
>> > > registers operations ).
>> > >   Using command descriptor enables the SW to queue new configurations
>> > > between data transfers in advance.
>> >
>> > What and when is the CMD descriptor used for..?
>> 
>>   CMD descriptor is mainly used for configuring controller register.
>>   We can read/write controller register via BAM using CMD descriptor 
>> only.
>>   CMD descriptor use command pipe for the transaction.
> 
> In which use cases would you need to issue cmd descriptors..?

   In IPQ5018 there is only one Crypto engine and it will get shared 
between
   UBI32 core & A53 core. So here we need to use command descriptor 
in-order to
   perform LOCKING/UNLOCKING mechanism. Since LOCK/ULOCK flag we can set 
only on
   CMD descriptor.
> 
>> >
>> > > >
>> > > > > > with LOCK bit set, The BAM will lock all other pipes not related to
>> > > > > > the current pipe group, and keep
>> > > > > > handling the current pipe only until it sees the UNLOCK set then it
>> > > > > > will release all locked pipes.
>> > > > > > locked pipe will not fetch new descriptors even if it got event/events
>> > > > > > adding more descriptors for
>> > > > > > this pipe (locked pipe).
>> > > > > >
>> > > > > > No need to expose as an API to user because its internal to driver, so
>> > > > > > while preparing command descriptor
>> > > > > > just we have to update the LOCK/UNLOCK flag.
>> > > >
>> > > > So IIUC, no api right? it would be internal to driver..?
>> > >
>> > >   Yes its totally internal to deriver.
>> >
>> > So no need for this patch then, right?
>> 
>>   This patch is needed , because if some hardware will shared between
>>   multiple core like A53 and ubi32 for example. In IPQ5018 there is
>>   only one crypto engine and this will be shared between A53 core and
>>   ubi32 core and in A53 core & ubi32 core there are different drivers
>>   is getting used. So if encryption/decryption request come at same
>>   time from both the driver then things will get messed up. So here we
>>   need LOCKING mechanism.  If first request is from A53 core driver
>>   then this driver should lock all the pipes other than pipe dedicated
>>   to A53 core. So while preparing CMD descriptor driver should used
>>   this flag "DMA_PREP_LOCK", Since LOCK and UNLOCK flag bit we can set
>>   only on CMD descriptor. Once request processed then driver will set
>>   UNLOCK flag on CMD descriptor. Driver should use this flag
>>   "DMA_PREP_UNLOCK" while preparing CMD descriptor. Same logic will be
>>   apply for ubi32 core driver as well.
> 
> Why cant this be applied at driver level, based on txn being issued it
> can lock issue the txn and then unlock when done. I am not convinced 
> yet
> that this needs to be exported to users and can be managed by dmaengine
> driver.

   The actual LOCK/UNLOCK flag should be set on hardware command 
descriptor.
   so this flag setting should be done in DMA engine driver. The user of 
the DMA
   driver like (in case of IPQ5018) Crypto can use flag "DMA_PREP_LOCK" & 
"DMA_PREP_UNLOCK"
   while preparing CMD descriptor before submitting to the DMA engine. In 
DMA engine driver
   we are checking these flasgs on CMD descriptor and setting actual 
LOCK/UNLOCK flag on hardware
   descriptor.

    if (flags & DMA_PREP_CMD) { <== check for descriptor type
		if (flags & DMA_PREP_LOCK)
			desc->flags |= cpu_to_le16(DESC_FLAG_LOCK); <== Actual LOCK flag 
setting on HW descriptor.
		if (flags & DMA_PREP_UNLOCK)
			desc->flags |= cpu_to_le16(DESC_FLAG_UNLOCK); <== Actual UNLOCK flag 
setting on HW descriptor.
	}
> 
> Thanks