Received: by 2002:a05:6a10:8c0a:0:0:0:0 with SMTP id go10csp3343116pxb; Sun, 31 Jan 2021 12:37:04 -0800 (PST) X-Google-Smtp-Source: ABdhPJzAca2lvw1E9148tnv/xsWHGFURpN6Ae4DcHtWzkTjbLeRtGBrEtcJv5b1ewvsNYPfwmGfx X-Received: by 2002:a17:906:11d6:: with SMTP id o22mr15066457eja.106.1612125423936; Sun, 31 Jan 2021 12:37:03 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1612125423; cv=none; d=google.com; s=arc-20160816; b=Wet19yRGV+GJYGGgD/XQ1TqubMo1nUui2oODkH22ghv3k8GRoH/z3V3CKE6cKIU621 v5em0GbcXvYM/Z++/hndbR/QSbG5B+uKvo75928vxYYTxFD7o7XToSs5PjYPyh7yDtq5 Sql2cNPEW6gQlmnW1yIsJdm0BPr80tpp+4Lv8CSbuKTb7h7o7oo2amPF2XRHPyYE5VXW wQnLqpOgs0Gy7mgd6oEmpmR8g0A4ngrMWIRod7Ml186IWteseUsT+FipA2G9QW3ysZfV DtwO6YVLdu99bV17tu+8itPqP17diydzkhSHhALS6p8wQpliV4c8WKo3eSyP9RQOmX4d +dtQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:user-agent:in-reply-to:content-disposition :mime-version:references:message-id:subject:cc:to:from:date; bh=Ab95FobIAoewuLDOeHCU5ix7zT8zjO7UBi9/uDrMSEY=; b=O9ejbo37mIOika/nZ8os3PzRzVQranLi8peAH/kZSfldSwaCC8ZSWNQ1MEXBqZCmqC vY/OLsaBwF2nBnB1KFbyNtGKdWjMgO6pz1BShfuepvc3rfOKWdaOtLE+pHWgP6aFiZfh gforoMcCZSfxhe8Etegeiqn0Iz5v5+u7eAVcPKMj+5y1Z7Y1HKVuzUZLsC6Y9lVech37 GaR0Mj/tcrSUi9RuhjO+tqx1DlGC7wYaKSOC448Ss2HLh8wL0vzilCEHgnYYvrzx2WKS /B37wHBACD+BeC3e1q21hGbsRp2URq9Wo1IcZ/XyU/tEdfWvZnIJOzzsFP9SMOgPoST6 osGA== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=arm.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id h17si9764046edv.235.2021.01.31.12.36.38; Sun, 31 Jan 2021 12:37:03 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=arm.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230124AbhAaUdV (ORCPT + 99 others); Sun, 31 Jan 2021 15:33:21 -0500 Received: from foss.arm.com ([217.140.110.172]:37290 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229728AbhAaUcu (ORCPT ); Sun, 31 Jan 2021 15:32:50 -0500 Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 867EF1042; Sun, 31 Jan 2021 12:32:01 -0800 (PST) Received: from e120937-lin (unknown [172.31.20.19]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 354463F71A; Sun, 31 Jan 2021 12:31:58 -0800 (PST) Date: Sun, 31 Jan 2021 20:31:47 +0000 From: Cristian Marussi To: Jyoti Bhayana Cc: Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Mauro Carvalho Chehab , "David S. Miller" , Rob Herring , Lukas Bulwahn , linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, sudeep.holla@arm.com, egranata@google.com, mikhail.golubev@opensynergy.com, Igor.Skalkin@opensynergy.com, Peter.hilber@opensynergy.com, ankitarora@google.com Subject: Re: [RFC PATCH v4 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors Message-ID: <20210131203147.GA8355@e120937-lin> References: <20210129221818.3540620-1-jbhayana@google.com> <20210129221818.3540620-2-jbhayana@google.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20210129221818.3540620-2-jbhayana@google.com> User-Agent: Mutt/1.9.4 (2018-02-28) Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Jyoti a few remarks down below, but beside those, while testing this series on a JUNO board (so lacking any GYRO/ACCEL sensor, a limited test case for now) I spotted that you missed in this series to add a matching device to the SCMI core. (as spotted by Jonathan too in his v4 review) In other words in your actual codebase you should have something like this, somewhere: diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index 3f5e8a42373e..cd6e38a8d8d2 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -743,7 +743,7 @@ static struct scmi_prot_devnames devnames[] = { { SCMI_PROTOCOL_SYSTEM, { "syspower" },}, { SCMI_PROTOCOL_PERF, { "cpufreq" },}, { SCMI_PROTOCOL_CLOCK, { "clocks" },}, - { SCMI_PROTOCOL_SENSOR, { "hwmon" },}, + { SCMI_PROTOCOL_SENSOR, { "hwmon", "iiodev" },}, { SCMI_PROTOCOL_RESET, { "reset" },}, { SCMI_PROTOCOL_VOLTAGE, { "regulator" },}, }; given that without this there's no chance the SCMI driver could be ever matched and probed by the SCMI core at first. So please commmit the above as a separate patch in this series, to have it working too in the upstream. Other comments below Thanks Cristian On Fri, Jan 29, 2021 at 10:18:18PM +0000, Jyoti Bhayana wrote: > This change provides ARM SCMI Protocol based IIO device. > This driver provides support for Accelerometer and Gyroscope using > SCMI Sensor Protocol extensions added in the SCMIv3.0 ARM specification > > Signed-off-by: Jyoti Bhayana > --- > MAINTAINERS | 6 + > drivers/iio/common/Kconfig | 1 + > drivers/iio/common/Makefile | 1 + > drivers/iio/common/scmi_sensors/Kconfig | 18 + > drivers/iio/common/scmi_sensors/Makefile | 5 + > drivers/iio/common/scmi_sensors/scmi_iio.c | 742 +++++++++++++++++++++ > 6 files changed, 773 insertions(+) > create mode 100644 drivers/iio/common/scmi_sensors/Kconfig > create mode 100644 drivers/iio/common/scmi_sensors/Makefile > create mode 100644 drivers/iio/common/scmi_sensors/scmi_iio.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index b516bb34a8d5..ccf37d43ab41 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -8567,6 +8567,12 @@ S: Maintained > F: Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt > F: drivers/iio/multiplexer/iio-mux.c > > +IIO SCMI BASED DRIVER > +M: Jyoti Bhayana > +L: linux-iio@vger.kernel.org > +S: Maintained > +F: drivers/iio/common/scmi_sensors/scmi_iio.c > + > IIO SUBSYSTEM AND DRIVERS > M: Jonathan Cameron > R: Lars-Peter Clausen > diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig > index 2b9ee9161abd..0334b4954773 100644 > --- a/drivers/iio/common/Kconfig > +++ b/drivers/iio/common/Kconfig > @@ -6,5 +6,6 @@ > source "drivers/iio/common/cros_ec_sensors/Kconfig" > source "drivers/iio/common/hid-sensors/Kconfig" > source "drivers/iio/common/ms_sensors/Kconfig" > +source "drivers/iio/common/scmi_sensors/Kconfig" > source "drivers/iio/common/ssp_sensors/Kconfig" > source "drivers/iio/common/st_sensors/Kconfig" > diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile > index 4bc30bb548e2..fad40e1e1718 100644 > --- a/drivers/iio/common/Makefile > +++ b/drivers/iio/common/Makefile > @@ -11,5 +11,6 @@ > obj-y += cros_ec_sensors/ > obj-y += hid-sensors/ > obj-y += ms_sensors/ > +obj-y += scmi_sensors/ > obj-y += ssp_sensors/ > obj-y += st_sensors/ > diff --git a/drivers/iio/common/scmi_sensors/Kconfig b/drivers/iio/common/scmi_sensors/Kconfig > new file mode 100644 > index 000000000000..67e084cbb1ab > --- /dev/null > +++ b/drivers/iio/common/scmi_sensors/Kconfig > @@ -0,0 +1,18 @@ > +# > +# IIO over SCMI > +# > +# When adding new entries keep the list in alphabetical order > + > +menu "IIO SCMI Sensors" > + > +config IIO_SCMI > + tristate "IIO SCMI" > + depends on ARM_SCMI_PROTOCOL > + select IIO_BUFFER > + select IIO_KFIFO_BUF > + help > + Say yes here to build support for IIO SCMI Driver. > + This provides ARM SCMI Protocol based IIO device. > + This driver provides support for accelerometer and gyroscope > + sensors available on SCMI based platforms. > +endmenu > diff --git a/drivers/iio/common/scmi_sensors/Makefile b/drivers/iio/common/scmi_sensors/Makefile > new file mode 100644 > index 000000000000..f13140a2575a > --- /dev/null > +++ b/drivers/iio/common/scmi_sensors/Makefile > @@ -0,0 +1,5 @@ > +# SPDX - License - Identifier : GPL - 2.0 - only > +# > +# Makefile for the IIO over SCMI > +# > +obj-$(CONFIG_IIO_SCMI) += scmi_iio.o > diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c > new file mode 100644 > index 000000000000..331ffaffd06f > --- /dev/null > +++ b/drivers/iio/common/scmi_sensors/scmi_iio.c > @@ -0,0 +1,742 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +/* > + * System Control and Management Interface(SCMI) based IIO sensor driver > + * > + * Copyright (C) 2020 Google LLC > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define ilog10(x) (ilog2(x) / const_ilog2(10)) > +#define UHZ_PER_HZ 1000000UL > +#define ODR_EXPAND(odr, uodr) (((odr) * 1000000ULL) + (uodr)) > +#define MAX_NUM_OF_CHANNELS 4 > +#define H32(x) (FIELD_GET(GENMASK_ULL(63, 32), (x))) > +#define L32(x) (FIELD_GET(GENMASK_ULL(31, 0), (x))) > + > +struct scmi_iio_priv { > + struct scmi_handle *handle; > + const struct scmi_sensor_info *sensor_info; > + struct iio_dev *indio_dev; > + long long iio_buf[MAX_NUM_OF_CHANNELS]; > + struct notifier_block sensor_update_nb; > + u32 *freq_avail; > + /* > + * range_avail = [minRange resolution maxRange] > + * with IIO val type as IIO_VAL_FRACTIONAL. > + * Hence, array of size 6. > + */ > + int range_avail[6]; > +}; > + > +static int scmi_iio_sensor_update_cb(struct notifier_block *nb, > + unsigned long event, void *data) > +{ > + struct scmi_sensor_update_report *sensor_update = data; > + struct iio_dev *scmi_iio_dev; > + struct scmi_iio_priv *sensor; > + s8 tstamp_scale; > + u64 time, time_ns; > + int i; > + > + if (sensor_update->readings_count == 0) > + return NOTIFY_DONE; > + > + sensor = container_of(nb, struct scmi_iio_priv, sensor_update_nb); > + > + for (i = 0; i < sensor_update->readings_count; i++) > + sensor->iio_buf[i] = sensor_update->readings[i].value; > + > + if (!sensor->sensor_info->timestamped) { > + time_ns = sensor_update->timestamp; If you decided to use the timestamp provided in the notification report, it is a ktime_t though, so it should be grabbed with something like: time_ns = ktime_to_ns(sensor_update->timestamp); > + } else { > + /* > + * All the axes are supposed to have the same value for timestamp. > + * We are just using the values from the Axis 0 here. > + */ > + time = sensor_update->readings[0].timestamp; > + > + /* > + * Timestamp returned by SCMI is in seconds and is equal to > + * time * power-of-10 multiplier(tstamp_scale) seconds. > + * Converting the timestamp to nanoseconds below. > + */ > + tstamp_scale = sensor->sensor_info->tstamp_scale + > + ilog10(NSEC_PER_SEC); > + if (tstamp_scale < 0) > + time_ns = div64_u64(time, > + int_pow(10, abs(tstamp_scale))); > + else > + time_ns = time * int_pow(10, tstamp_scale); > + } > + > + scmi_iio_dev = sensor->indio_dev; > + iio_push_to_buffers_with_timestamp(scmi_iio_dev, sensor->iio_buf, > + time_ns); > + return NOTIFY_OK; > +} > + > +static int scmi_iio_buffer_preenable(struct iio_dev *iio_dev) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + u32 sensor_id = sensor->sensor_info->id; > + u32 sensor_config; > + int err; > + > + if (sensor->sensor_info->timestamped) > + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, > + SCMI_SENS_CFG_TSTAMP_ENABLE); Here sensor_config is not zeroed at definition time so still not initialized when ORed. > + > + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK, > + SCMI_SENS_CFG_SENSOR_ENABLE); > + > + err = sensor->handle->notify_ops->register_event_notifier(sensor->handle, > + SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE, > + &sensor_id, &sensor->sensor_update_nb); > + if (err) { > + dev_err(&iio_dev->dev, > + "Error in registering sensor update notifier for sensor %s err %d", > + sensor->sensor_info->name, err); > + return err; > + } > + > + err = sensor->handle->sensor_ops->config_set(sensor->handle, > + sensor->sensor_info->id, sensor_config); > + if (err) { > + sensor->handle->notify_ops->unregister_event_notifier(sensor->handle, > + SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE, > + &sensor_id, &sensor->sensor_update_nb); > + dev_err(&iio_dev->dev, "Error in enabling sensor %s err %d", > + sensor->sensor_info->name, err); > + } > + > + return err; > +} > + > +static int scmi_iio_buffer_postdisable(struct iio_dev *iio_dev) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + u32 sensor_id = sensor->sensor_info->id; > + u32 sensor_config = 0; > + int err; > + > + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK, > + SCMI_SENS_CFG_SENSOR_DISABLE); > + > + err = sensor->handle->notify_ops->unregister_event_notifier(sensor->handle, > + SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE, > + &sensor_id, &sensor->sensor_update_nb); > + if (err) { > + dev_err(&iio_dev->dev, > + "Error in unregistering sensor update notifier for sensor %s err %d", > + sensor->sensor_info->name, err); > + return err; > + } > + > + err = sensor->handle->sensor_ops->config_set(sensor->handle, sensor_id, > + sensor_config); > + if (err) { > + dev_err(&iio_dev->dev, > + "Error in disabling sensor %s with err %d", > + sensor->sensor_info->name, err); > + } > + > + return err; > +} > + > +static const struct iio_buffer_setup_ops scmi_iio_buffer_ops = { > + .preenable = scmi_iio_buffer_preenable, > + .postdisable = scmi_iio_buffer_postdisable, > +}; > + > +static int scmi_iio_read_avail(struct iio_dev *iio_dev, > + struct iio_chan_spec const *chan, > + const int **vals, int *type, int *length, > + long mask) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + *vals = sensor->freq_avail; > + *type = IIO_VAL_INT_PLUS_MICRO; > + *length = sensor->sensor_info->intervals.count * 2; > + if (sensor->sensor_info->intervals.segmented) > + return IIO_AVAIL_RANGE; > + else > + return IIO_AVAIL_LIST; > + case IIO_CHAN_INFO_RAW: > + *vals = sensor->range_avail; > + *type = IIO_VAL_FRACTIONAL; > + *length = ARRAY_SIZE(sensor->range_avail); > + return IIO_AVAIL_RANGE; > + default: > + return -EINVAL; > + } > +} > + > +static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + u64 sec, mult, uHz; > + u32 sensor_config; > + > + int err = sensor->handle->sensor_ops->config_get(sensor->handle, > + sensor->sensor_info->id, &sensor_config); > + if (err) { > + dev_err(&iio_dev->dev, > + "Error in getting sensor config for sensor %s err %d", > + sensor->sensor_info->name, err); > + return err; > + } > + > + uHz = ODR_EXPAND(val, val2); > + > + /* > + * The seconds field in the sensor interval in SCMI is 16 bits long > + * Therefore seconds = 1/Hz <= 0xFFFF. As floating point calculations are > + * discouraged in the kernel driver code, to calculate the scale factor (sf) > + * (1* 1000000 * sf)/uHz <= 0xFFFF. Therefore, sf <= (uHz * 0xFFFF)/1000000 > + */ > + mult = ilog10(((u64)uHz * 0xFFFF) / UHZ_PER_HZ); > + > + sec = div64_u64(int_pow(10, mult) * UHZ_PER_HZ, uHz); > + if (sec == 0) { > + dev_err(&iio_dev->dev, > + "Trying to set invalid sensor update value for sensor %s", > + sensor->sensor_info->name); > + return -EINVAL; > + } > + > + sensor_config &= ~SCMI_SENS_CFG_UPDATE_SECS_MASK; > + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_UPDATE_SECS_MASK, sec); > + sensor_config &= ~SCMI_SENS_CFG_UPDATE_EXP_MASK; > + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_UPDATE_EXP_MASK, -mult); > + > + if (sensor->sensor_info->timestamped) { > + sensor_config &= ~SCMI_SENS_CFG_TSTAMP_ENABLED_MASK; > + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, > + SCMI_SENS_CFG_TSTAMP_ENABLE); > + } > + > + sensor_config &= ~SCMI_SENS_CFG_ROUND_MASK; > + sensor_config |= > + FIELD_PREP(SCMI_SENS_CFG_ROUND_MASK, SCMI_SENS_CFG_ROUND_AUTO); > + > + err = sensor->handle->sensor_ops->config_set(sensor->handle, > + sensor->sensor_info->id, sensor_config); > + if (err) > + dev_err(&iio_dev->dev, > + "Error in setting sensor update interval for sensor %s value %u err %d", > + sensor->sensor_info->name, sensor_config, err); > + > + return err; > +} > + > +static int scmi_iio_write_raw(struct iio_dev *iio_dev, > + struct iio_chan_spec const *chan, int val, > + int val2, long mask) > +{ > + int err; > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + mutex_lock(&iio_dev->mlock); > + err = scmi_iio_set_odr_val(iio_dev, val, val2); > + mutex_unlock(&iio_dev->mlock); > + return err; > + default: > + return -EINVAL; > + } > +} > + > +static u64 scmi_iio_convert_interval_to_ns(u32 val) > +{ > + u64 sensor_update_interval = > + SCMI_SENS_INTVL_GET_SECS(val) * NSEC_PER_SEC; > + u64 sensor_interval_mult; > + int mult; > + > + mult = SCMI_SENS_INTVL_GET_EXP(val); > + if (mult < 0) { > + sensor_interval_mult = int_pow(10, abs(mult)); > + sensor_update_interval = > + sensor_update_interval / sensor_interval_mult; > + } else { > + sensor_interval_mult = int_pow(10, mult); > + sensor_update_interval = > + sensor_update_interval * sensor_interval_mult; > + } > + return sensor_update_interval; > +} > + > +static void convert_ns_to_freq(u64 interval_ns, u64 *hz, u64 *uhz) > +{ > + u64 rem; > + > + *hz = div64_u64_rem(NSEC_PER_SEC, interval_ns, &rem); > + *uhz = (rem * 1000000UL) / interval_ns; > +} > + > +static int scmi_iio_get_odr_val(struct iio_dev *iio_dev, int *val, int *val2) > +{ > + u64 sensor_update_interval, sensor_interval_mult, hz, uhz; > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + u32 sensor_config; > + int mult; > + > + int err = sensor->handle->sensor_ops->config_get(sensor->handle, > + sensor->sensor_info->id, &sensor_config); > + if (err) { > + dev_err(&iio_dev->dev, > + "Error in getting sensor config for sensor %s err %d", > + sensor->sensor_info->name, err); > + return err; > + } > + > + sensor_update_interval = > + SCMI_SENS_CFG_GET_UPDATE_SECS(sensor_config) * NSEC_PER_SEC; > + > + mult = SCMI_SENS_CFG_GET_UPDATE_EXP(sensor_config); > + if (mult < 0) { > + sensor_interval_mult = int_pow(10, abs(mult)); > + sensor_update_interval = > + sensor_update_interval / sensor_interval_mult; > + } else { > + sensor_interval_mult = int_pow(10, mult); > + sensor_update_interval = > + sensor_update_interval * sensor_interval_mult; > + } > + > + convert_ns_to_freq(sensor_update_interval, &hz, &uhz); > + *val = hz; > + *val2 = uhz; > + return 0; > +} > + > +static int scmi_iio_read_raw(struct iio_dev *iio_dev, > + struct iio_chan_spec const *ch, int *val, > + int *val2, long mask) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + s8 scale; > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + scale = sensor->sensor_info->axis[ch->scan_index].scale; > + if (scale < 0) { > + *val = 1; > + *val2 = int_pow(10, abs(scale)); > + return IIO_VAL_FRACTIONAL; > + } > + *val = int_pow(10, scale); > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SAMP_FREQ: > + ret = scmi_iio_get_odr_val(iio_dev, val, val2); > + return ret ? ret : IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > +} > + > +static const struct iio_info scmi_iio_info = { > + .read_raw = scmi_iio_read_raw, > + .read_avail = scmi_iio_read_avail, > + .write_raw = scmi_iio_write_raw, > +}; > + > +static void scmi_iio_set_timestamp_channel(struct iio_chan_spec *iio_chan, > + int scan_index) > +{ > + iio_chan->type = IIO_TIMESTAMP; > + iio_chan->channel = -1; > + iio_chan->scan_index = scan_index; > + iio_chan->scan_type.sign = 'u'; > + iio_chan->scan_type.realbits = 64; > + iio_chan->scan_type.storagebits = 64; > +} > + > +static void scmi_iio_set_data_channel(struct iio_chan_spec *iio_chan, > + enum iio_chan_type type, > + enum iio_modifier mod, int scan_index) > +{ > + iio_chan->type = type; > + iio_chan->modified = 1; > + iio_chan->channel2 = mod; > + iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_SCALE); > + iio_chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ); > + iio_chan->info_mask_shared_by_type_available = > + BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_RAW); > + iio_chan->scan_index = scan_index; > + iio_chan->scan_type.sign = 's'; > + iio_chan->scan_type.realbits = 64; > + iio_chan->scan_type.storagebits = 64; > + iio_chan->scan_type.endianness = IIO_LE; > +} > + > +static int scmi_iio_get_chan_modifier(const char *name, > + enum iio_modifier *modifier) > +{ > + char *pch, mod; > + > + if (!name) > + return -EINVAL; > + > + pch = strrchr(name, '_'); > + if (!pch) > + return -EINVAL; > + > + mod = *(pch + 1); > + switch (mod) { > + case 'X': > + *modifier = IIO_MOD_X; > + return 0; > + case 'Y': > + *modifier = IIO_MOD_Y; > + return 0; > + case 'Z': > + *modifier = IIO_MOD_Z; > + return 0; > + default: > + return -EINVAL; > + } > +} > + > +static int scmi_iio_get_chan_type(u8 scmi_type, enum iio_chan_type *iio_type) > +{ > + switch (scmi_type) { > + case METERS_SEC_SQUARED: > + *iio_type = IIO_ACCEL; > + return 0; > + case RADIANS_SEC: > + *iio_type = IIO_ANGL_VEL; > + return 0; > + default: > + return -EINVAL; > + } > +} > + > +static int scmi_iio_get_sensor_max_range(struct iio_dev *iio_dev, int *val, > + int *val2) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + int max_range_high, max_range_low; > + long long max_range; > + > + /* > + * All the axes are supposed to have the same value for max range. > + * We are just using the values from the Axis 0 here. > + */ > + if (sensor->sensor_info->axis[0].extended_attrs) { > + max_range = sensor->sensor_info->axis[0].attrs.max_range; > + max_range_high = H32(max_range); > + max_range_low = L32(max_range); > + > + /* > + * As IIO Val types have no provision for 64 bit values, > + * this driver only supports sensors whose maximum range > + * reported by the SCMI Platform fits within lower 32 bits > + */ > + if (max_range_high != 0) > + return -EINVAL; > + > + *val = max_range_low; > + *val2 = 1; > + } > + return 0; > +} > + > +static void scmi_iio_get_sensor_resolution(struct iio_dev *iio_dev, int *val, > + int *val2) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + > + /* > + * All the axes are supposed to have the same value for resolution > + * and exponent. We are just using the values from the Axis 0 here. > + */ > + if (sensor->sensor_info->axis[0].extended_attrs) { > + uint resolution = sensor->sensor_info->axis[0].resolution; > + s8 exponent = sensor->sensor_info->axis[0].exponent; > + s8 scale = sensor->sensor_info->axis[0].scale; > + > + /* > + * To provide the raw value for the resolution to the userspace, > + * need to divide the resolution exponent by the sensor scale > + */ > + exponent = exponent - scale; > + if (exponent >= 0) { > + *val = resolution * int_pow(10, exponent); > + *val2 = 1; > + } else { > + *val = resolution; > + *val2 = int_pow(10, abs(exponent)); > + } > + } > +} > + > +static int scmi_iio_get_sensor_min_range(struct iio_dev *iio_dev, int *val, > + int *val2) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + int min_range_high, min_range_low; > + long long min_range; > + > + /* > + * All the axes are supposed to have the same value for min range. > + * We are just using the values from the Axis 0 here. > + */ > + if (sensor->sensor_info->axis[0].extended_attrs) { > + min_range = sensor->sensor_info->axis[0].attrs.min_range; > + min_range_high = H32(min_range); > + min_range_low = L32(min_range); > + > + /* > + * As IIO Val types have no provision for 64 bit values, > + * this driver only supports sensors whose minimum range > + * reported by SCMI Platform fits within lower 32 bits > + */ > + if (min_range_high != 0xFFFFFFFF) > + return -EINVAL; > + > + *val = min_range_low; > + *val2 = 1; > + } > + return 0; > +} > + > +static int scmi_iio_set_sensor_range_avail(struct iio_dev *iio_dev) > +{ > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + int ret; > + > + ret = scmi_iio_get_sensor_min_range(iio_dev, &sensor->range_avail[0], > + &sensor->range_avail[1]); > + if (ret) > + return ret; > + > + scmi_iio_get_sensor_resolution(iio_dev, &sensor->range_avail[2], > + &sensor->range_avail[3]); > + ret = scmi_iio_get_sensor_max_range(iio_dev, &sensor->range_avail[4], > + &sensor->range_avail[5]); > + return ret; > +} > + > +static int scmi_iio_set_sampling_freq_avail(struct iio_dev *iio_dev) > +{ > + u64 cur_interval_ns, low_interval_ns, high_interval_ns, step_size_ns, > + hz, uhz; > + unsigned int cur_interval, low_interval, high_interval, step_size; > + struct scmi_iio_priv *sensor = iio_priv(iio_dev); > + int i; > + > + sensor->freq_avail = devm_kzalloc(&iio_dev->dev, > + sizeof(u32) * (sensor->sensor_info->intervals.count * 2), > + GFP_KERNEL); > + if (!sensor->freq_avail) > + return -ENOMEM; > + > + if (sensor->sensor_info->intervals.segmented) { > + low_interval = sensor->sensor_info->intervals > + .desc[SCMI_SENS_INTVL_SEGMENT_LOW]; > + low_interval_ns = scmi_iio_convert_interval_to_ns(low_interval); > + convert_ns_to_freq(low_interval_ns, &hz, &uhz); > + sensor->freq_avail[0] = hz; > + sensor->freq_avail[1] = uhz; > + > + step_size = sensor->sensor_info->intervals > + .desc[SCMI_SENS_INTVL_SEGMENT_STEP]; > + step_size_ns = scmi_iio_convert_interval_to_ns(step_size); > + convert_ns_to_freq(step_size_ns, &hz, &uhz); > + sensor->freq_avail[2] = hz; > + sensor->freq_avail[3] = uhz; > + > + high_interval = sensor->sensor_info->intervals > + .desc[SCMI_SENS_INTVL_SEGMENT_HIGH]; > + high_interval_ns = > + scmi_iio_convert_interval_to_ns(high_interval); > + convert_ns_to_freq(high_interval_ns, &hz, &uhz); > + sensor->freq_avail[4] = hz; > + sensor->freq_avail[5] = uhz; > + } else { > + for (i = 0; i < sensor->sensor_info->intervals.count; i++) { > + cur_interval = sensor->sensor_info->intervals.desc[i]; > + cur_interval_ns = scmi_iio_convert_interval_to_ns(cur_interval); > + convert_ns_to_freq(cur_interval_ns, &hz, &uhz); > + sensor->freq_avail[i * 2] = hz; > + sensor->freq_avail[i * 2 + 1] = uhz; > + } > + } > + return 0; > +} > + > +static int scmi_iio_buffers_setup(struct iio_dev *scmi_iiodev) > +{ > + struct iio_buffer *buffer; > + > + buffer = devm_iio_kfifo_allocate(&scmi_iiodev->dev); > + if (!buffer) > + return -ENOMEM; > + > + iio_device_attach_buffer(scmi_iiodev, buffer); > + scmi_iiodev->modes |= INDIO_BUFFER_SOFTWARE; > + scmi_iiodev->setup_ops = &scmi_iio_buffer_ops; > + return 0; > +} > + > +static int scmi_alloc_iiodev(struct device *dev, struct scmi_handle *handle, > + const struct scmi_sensor_info *sensor_info, > + struct iio_dev **scmi_iio_dev) > +{ > + struct iio_chan_spec *iio_channels; > + struct scmi_iio_priv *sensor; > + enum iio_modifier modifier; > + enum iio_chan_type type; > + struct iio_dev *iiodev; > + int i, ret; > + > + iiodev = devm_iio_device_alloc(dev, sizeof(*sensor)); > + if (!iiodev) > + return -ENOMEM; > + > + iiodev->modes = INDIO_DIRECT_MODE; > + iiodev->dev.parent = dev; > + sensor = iio_priv(iiodev); > + sensor->handle = handle; > + sensor->sensor_info = sensor_info; > + sensor->sensor_update_nb.notifier_call = scmi_iio_sensor_update_cb; > + sensor->indio_dev = iiodev; > + > + /* adding one additional channel for timestamp */ > + iiodev->num_channels = sensor_info->num_axis + 1; > + iiodev->name = sensor_info->name; > + iiodev->info = &scmi_iio_info; > + > + iio_channels = > + devm_kzalloc(dev, > + sizeof(*iio_channels) * (iiodev->num_channels), > + GFP_KERNEL); > + if (!iio_channels) > + return -ENOMEM; > + > + scmi_iio_set_sampling_freq_avail(iiodev); > + > + ret = scmi_iio_set_sensor_range_avail(iiodev); > + if (ret) { > + dev_err(dev, "Error while setting the sensor %s range %d", > + sensor_info->name, ret); > + return ret; > + } > + > + for (i = 0; i < sensor_info->num_axis; i++) { > + ret = scmi_iio_get_chan_type(sensor_info->axis[i].type, &type); > + if (ret < 0) > + return ret; > + > + ret = scmi_iio_get_chan_modifier(sensor_info->axis[i].name, > + &modifier); > + if (ret < 0) > + return ret; > + > + scmi_iio_set_data_channel(&iio_channels[i], type, modifier, > + sensor_info->axis[i].id); > + } > + > + scmi_iio_set_timestamp_channel(&iio_channels[i], i); > + iiodev->channels = iio_channels; > + *scmi_iio_dev = iiodev; > + return ret; > +} > + > +static int scmi_iio_dev_probe(struct scmi_device *sdev) > +{ > + const struct scmi_sensor_info *sensor_info; > + struct scmi_handle *handle = sdev->handle; > + struct device *dev = &sdev->dev; > + struct iio_dev *scmi_iio_dev; > + u16 nr_sensors; > + int err, i; > + > + if (!handle || !handle->sensor_ops) { > + dev_err(dev, "SCMI device has no sensor interface\n"); > + return -EINVAL; > + } > + > + nr_sensors = handle->sensor_ops->count_get(handle); > + if (!nr_sensors) { > + dev_dbg(dev, "0 sensors found via SCMI bus\n"); > + return -EINVAL; > + } > + > + dev_dbg(dev, "%d sensors found via SCMI bus\n", nr_sensors); > + > + for (i = 0; i < nr_sensors; i++) { > + sensor_info = handle->sensor_ops->info_get(handle, i); > + if (!sensor_info) { > + dev_err(dev, "SCMI sensor %d has missing info\n", i); > + return -EINVAL; > + } > + > + /* Skipping scalar sensor,as this driver only supports accel and gyro */ > + if (sensor_info->num_axis == 0) > + continue; > + Given that this driver only handles multi-axes sensors of GYRO/ACCEL type, maybe here it would make sense to explicitly check also sensor_info->type to be of compatible type, similar to what you do already later against axes[0].type in scmi_alloc_iiodev()->scmi_iio_get_chan_type(): this way you can just skip a non-compatible (NON gyro or accel) multi-axes sensor here, without going further into scmi_alloc_iiodev(). Moreover, as it now, if you'd happen to receive from the SCMI core enumeration a list of sensors which includes some non-compatible multi-axes sensor you'd fail scmi_iio_get_chan_type() with -EINVAL and so insead of skipping such an unsupported sensor you'll end up failing the whole probe even though maybe some other supported sensors were indeed present in the list. (not sure this reasoning is consistent with what Jonathan said about returning a -ENODEV here when sensor is not handled..I'll add a comment on that other thread too) > + err = scmi_alloc_iiodev(dev, handle, sensor_info, > + &scmi_iio_dev); > + if (err < 0) { > + dev_err(dev, > + "failed to allocate IIO device for sensor %s: %d\n", > + sensor_info->name, err); > + return err; > + } > + > + err = scmi_iio_buffers_setup(scmi_iio_dev); > + if (err < 0) { > + dev_err(dev, > + "IIO buffer setup error at sensor %s: %d\n", > + sensor_info->name, err); > + return err; > + } > + > + err = devm_iio_device_register(dev, scmi_iio_dev); > + if (err) { > + dev_err(dev, > + "IIO device registration failed at sensor %s: %d\n", > + sensor_info->name, err); > + return err; > + } > + } > + return err; > +} > + > +static const struct scmi_device_id scmi_id_table[] = { > + { SCMI_PROTOCOL_SENSOR, "iiodev" }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(scmi, scmi_id_table); > + > +static struct scmi_driver scmi_iiodev_driver = { > + .name = "scmi-sensor-iiodev", > + .probe = scmi_iio_dev_probe, > + .id_table = scmi_id_table, > +}; > + > +module_scmi_driver(scmi_iiodev_driver); > + > +MODULE_AUTHOR("Jyoti Bhayana "); > +MODULE_DESCRIPTION("SCMI IIO Driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.30.0.365.g02bc693789-goog >