Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Chunyan Zhang <zhang.lyra@gmail.com>
To:     Robin Murphy <robin.murphy@arm.com>,
        Rob Herring <robh+dt@kernel.org>,
        Joerg Roedel <joro@8bytes.org>
Cc:     iommu@lists.linux-foundation.org, devicetree@vger.kernel.org,
        Baolin Wang <baolin.wang7@gmail.com>,
        linux-kernel@vger.kernel.org, Orson Zhai <orsonzhai@gmail.com>,
        Chunyan Zhang <zhang.lyra@gmail.com>,
        Sheng Xu <sheng.xu@unisoc.com>,
        Chunyan Zhang <chunyan.zhang@unisoc.com>
Subject: [PATCH v3 0/2] Add Unisoc iommu basic driver
Date:   Wed,  3 Feb 2021 17:07:25 +0800
Message-Id: <20210203090727.789939-1-zhang.lyra@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

Changes since v2:
* Added a WARN and return 0 if an invalid iova was passed to sprd_iommu_iova_to_phys();
* Changed the name of sprd_iommu_write();
* Revised CONFIG_SPRD_IOMMU help graph in Kconfig.
* Revised comments for the struct sprd_iommu_device;
* Converted to use "GPL" instread of "GPL v2", they are same as license-rules.rst shows.

Changes since v1:
* Fixed compile errors reported by kernel test robot <lkp@intel.com>.
* Changed to use syscon to get mapped registers for iommu and media devices to avoid double map issue.
* Addressed Robin's comments:
- Added including offset in the returned physical address if the input virtual address isn't page-aligned;
- Added platform_device_put() after calling of_find_device_by_node();
- Removed iommu register offset from driver, it will be defined as the cell of DT reference to syscon phandle;
- Removed multi compatible strings which are not needed;
- Added comments for the function sprd_iommu_clk_enable();
- Added clocks property in bindings;
- Set device_driver.suppress_bind_attrs to disable unbind the devices via sysfs;
- A few trivial fixes.

Changes since RFC v2:
* Addressed Robin's comments:
- Add COMPILE_TEST support;
- Use DMA allocator for PTE;
- Revised to avoid resource leak issue;
- Added ->iotlb_sync implemented;
- Moved iommu group allocation to probe;
- Changed some function names to make them sprd specific;
* Added support for more iommu instance;

Changes since RFC v1:
* Rebased on v5.11-rc1;
* Changed sprd-iommu to tristate;
* Removed check for args_count of iommu OF node, since there's no args
  for sprd-iommu device node;
* Added another IP version (i.e. vau);
* Removed unnecessary configs selection from CONFIG_SPRD_IOMMU;
* Changed to get zeroed pages.

Chunyan Zhang (2):
  dt-bindings: iommu: add bindings for sprd iommu
  iommu: add Unisoc iommu basic driver

 .../devicetree/bindings/iommu/sprd,iommu.yaml |  72 +++
 drivers/iommu/Kconfig                         |  12 +
 drivers/iommu/Makefile                        |   1 +
 drivers/iommu/sprd-iommu.c                    | 600 ++++++++++++++++++
 4 files changed, 685 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iommu/sprd,iommu.yaml
 create mode 100644 drivers/iommu/sprd-iommu.c

-- 
2.25.1