Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To:     f.fainelli@gmail.com, Saenz Julienne <nsaenzjulienne@suse.de>,
        bcm-kernel-feedback-list@broadcom.com,
        linux-rpi-kernel@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>
Cc:     phil@raspberrypi.com, wahrenst@gmx.net,
        linux-kernel@vger.kernel.org
Subject: [RFC/PATCH 09/11] ARM: dts: bcm2711: Enable V3D
Date:   Fri,  5 Feb 2021 14:52:45 +0100
Message-Id: <20210205135249.2924-10-nsaenzjulienne@suse.de>
In-Reply-To: <20210205135249.2924-1-nsaenzjulienne@suse.de>
References: <20210205135249.2924-1-nsaenzjulienne@suse.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This enables V3D for bcm2711 (used in the Raspberry Pi 4).

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 537498a93a3a..dd8376f474db 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -548,6 +548,18 @@ genet_mdio: mdio@e14 {
 				#size-cells = <0x1>;
 			};
 		};
+
+		v3d: gpu@7ec04000 {
+			compatible = "brcm,bcm2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			clocks = <&firmware_clocks 5>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
 
-- 
2.30.0