Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 5 Feb 2021 16:35:26 -0600
From:   Rob Herring <robh@kernel.org>
To:     Steen Hegelund <steen.hegelund@microchip.com>
Cc:     Philipp Zabel <p.zabel@pengutronix.de>,
        Andrew Lunn <andrew@lunn.ch>,
        Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Gregory Clement <gregory.clement@bootlin.com>,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        devicetree@vger.kernel.org
Subject: Re: [PATCH v4 3/3] arm64: dts: reset: add microchip sparx5 switch
 reset driver
Message-ID: <20210205223526.GA3869001@robh.at.kernel.org>
References: <20210120081921.3315847-1-steen.hegelund@microchip.com>
 <20210120081921.3315847-4-steen.hegelund@microchip.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20210120081921.3315847-4-steen.hegelund@microchip.com>
Precedence: bulk

On Wed, Jan 20, 2021 at 09:19:21AM +0100, Steen Hegelund wrote:
> This provides reset driver support for the Microchip Sparx5 PCB134 and
> PCB135 reference boards.

This isn't a compatible change. You need an explanation why that's okay 
if that's intended.

> 
> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
> ---
>  arch/arm64/boot/dts/microchip/sparx5.dtsi | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
> index 380281f312d8..4edbb9fcdce0 100644
> --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
> +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
> @@ -132,9 +132,17 @@ mux: mux-controller {
>  			};
>  		};
>  
> -		reset@611010008 {
> -			compatible = "microchip,sparx5-chip-reset";
> -			reg = <0x6 0x11010008 0x4>;
> +		gcb_ctrl: syscon@611010000 {
> +			compatible = "microchip,sparx5-gcb-syscon", "syscon";
> +			reg = <0x6 0x11010000 0x10000>;
> +		};
> +
> +		reset: reset-controller@0 {
> +			compatible = "microchip,sparx5-switch-reset";
> +			reg = <0x6 0x0 0x0>;

Your register length is 0?

> +			#reset-cells = <1>;
> +			cpu-syscon = <&cpu_ctrl>;

Can't you accomplish the same thing adding these to 
"microchip,sparx5-chip-reset"? Or possibly as a child node.

Define nodes based on h/w blocks, not as containers of things you happen 
to want for some driver.

> +			gcb-syscon = <&gcb_ctrl>;
>  		};
>  
>  		uart0: serial@600100000 {
> -- 
> 2.29.2
>