Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   <stefanc@marvell.com>
To:     <netdev@vger.kernel.org>
CC:     <thomas.petazzoni@bootlin.com>, <davem@davemloft.net>,
        <nadavh@marvell.com>, <ymarkman@marvell.com>,
        <linux-kernel@vger.kernel.org>, <stefanc@marvell.com>,
        <kuba@kernel.org>, <linux@armlinux.org.uk>, <mw@semihalf.com>,
        <andrew@lunn.ch>, <rmk+kernel@armlinux.org.uk>,
        <atenart@kernel.org>, <devicetree@vger.kernel.org>,
        <robh+dt@kernel.org>, <sebastian.hesselbarth@gmail.com>,
        <gregory.clement@bootlin.com>,
        <linux-arm-kernel@lists.infradead.org>
Subject: [RESEND PATCH v8 net-next 10/15] net: mvpp2: add RXQ flow control configurations
Date:   Sun, 7 Feb 2021 10:19:19 +0200
Message-ID: <1612685964-21890-11-git-send-email-stefanc@marvell.com>
In-Reply-To: <1612685964-21890-1-git-send-email-stefanc@marvell.com>
References: <1612685964-21890-1-git-send-email-stefanc@marvell.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

From: Stefan Chulski <stefanc@marvell.com>

This patch adds RXQ flow control configurations.
Flow control disabled by default.
Minimum ring size limited to 1024 descriptors.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h      |  35 +++++-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 116 ++++++++++++++++++++
 2 files changed, 150 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index e010410..0f27be0 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -766,9 +766,36 @@
 #define MSS_SRAM_SIZE			0x800
 #define MSS_FC_COM_REG			0
 #define FLOW_CONTROL_ENABLE_BIT		BIT(0)
+#define FLOW_CONTROL_UPDATE_COMMAND_BIT	BIT(31)
 #define FC_QUANTA			0xFFFF
 #define FC_CLK_DIVIDER			100
-#define MSS_THRESHOLD_STOP		768
+
+#define MSS_RXQ_TRESH_BASE		0x200
+#define MSS_RXQ_TRESH_OFFS		4
+#define MSS_RXQ_TRESH_REG(q, fq)	(MSS_RXQ_TRESH_BASE + (((q) + (fq)) \
+					* MSS_RXQ_TRESH_OFFS))
+
+#define MSS_RXQ_TRESH_START_MASK	0xFFFF
+#define MSS_RXQ_TRESH_STOP_MASK		(0xFFFF << MSS_RXQ_TRESH_STOP_OFFS)
+#define MSS_RXQ_TRESH_STOP_OFFS		16
+
+#define MSS_RXQ_ASS_BASE	0x80
+#define MSS_RXQ_ASS_OFFS	4
+#define MSS_RXQ_ASS_PER_REG	4
+#define MSS_RXQ_ASS_PER_OFFS	8
+#define MSS_RXQ_ASS_PORTID_OFFS	0
+#define MSS_RXQ_ASS_PORTID_MASK	0x3
+#define MSS_RXQ_ASS_HOSTID_OFFS	2
+#define MSS_RXQ_ASS_HOSTID_MASK	0x3F
+
+#define MSS_RXQ_ASS_Q_BASE(q, fq) ((((q) + (fq)) % MSS_RXQ_ASS_PER_REG)	 \
+				  * MSS_RXQ_ASS_PER_OFFS)
+#define MSS_RXQ_ASS_PQ_BASE(q, fq) ((((q) + (fq)) / MSS_RXQ_ASS_PER_REG) \
+				   * MSS_RXQ_ASS_OFFS)
+#define MSS_RXQ_ASS_REG(q, fq) (MSS_RXQ_ASS_BASE + MSS_RXQ_ASS_PQ_BASE(q, fq))
+
+#define MSS_THRESHOLD_STOP	768
+#define MSS_THRESHOLD_START	1024
 
 /* RX buffer constants */
 #define MVPP2_SKB_SHINFO_SIZE \
@@ -1026,6 +1053,9 @@ struct mvpp2 {
 
 	/* Global TX Flow Control config */
 	bool global_tx_fc;
+
+	/* Spinlocks for CM3 shared memory configuration */
+	spinlock_t mss_spinlock;
 };
 
 struct mvpp2_pcpu_stats {
@@ -1188,6 +1218,9 @@ struct mvpp2_port {
 	bool rx_hwtstamp;
 	enum hwtstamp_tx_types tx_hwtstamp_type;
 	struct mvpp2_hwtstamp_queue tx_hwtstamp_queue[2];
+
+	/* Firmware TX flow control */
+	bool tx_fc;
 };
 
 /* The mvpp2_tx_desc and mvpp2_rx_desc structures describe the
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index fec1c81..29ba62a 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -742,6 +742,110 @@ static void *mvpp2_buf_alloc(struct mvpp2_port *port,
 	return data;
 }
 
+/* Routine enable flow control for RXQs condition */
+static void mvpp2_rxq_enable_fc(struct mvpp2_port *port)
+{
+	int val, cm3_state, host_id, q;
+	int fq = port->first_rxq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->priv->mss_spinlock, flags);
+
+	/* Remove Flow control enable bit to prevent race between FW and Kernel
+	 * If Flow control was enabled, it would be re-enabled.
+	 */
+	val = mvpp2_cm3_read(port->priv, MSS_FC_COM_REG);
+	cm3_state = (val & FLOW_CONTROL_ENABLE_BIT);
+	val &= ~FLOW_CONTROL_ENABLE_BIT;
+	mvpp2_cm3_write(port->priv, MSS_FC_COM_REG, val);
+
+	/* Set same Flow control for all RXQs */
+	for (q = 0; q < port->nrxqs; q++) {
+		/* Set stop and start Flow control RXQ thresholds */
+		val = MSS_THRESHOLD_START;
+		val |= (MSS_THRESHOLD_STOP << MSS_RXQ_TRESH_STOP_OFFS);
+		mvpp2_cm3_write(port->priv, MSS_RXQ_TRESH_REG(q, fq), val);
+
+		val = mvpp2_cm3_read(port->priv, MSS_RXQ_ASS_REG(q, fq));
+		/* Set RXQ port ID */
+		val &= ~(MSS_RXQ_ASS_PORTID_MASK << MSS_RXQ_ASS_Q_BASE(q, fq));
+		val |= (port->id << MSS_RXQ_ASS_Q_BASE(q, fq));
+		val &= ~(MSS_RXQ_ASS_HOSTID_MASK << (MSS_RXQ_ASS_Q_BASE(q, fq)
+			+ MSS_RXQ_ASS_HOSTID_OFFS));
+
+		/* Calculate RXQ host ID:
+		 * In Single queue mode: Host ID equal to Host ID used for
+		 *			 shared RX interrupt
+		 * In Multi queue mode: Host ID equal to number of
+		 *			RXQ ID / number of CoS queues
+		 * In Single resource mode: Host ID always equal to 0
+		 */
+		if (queue_mode == MVPP2_QDIST_SINGLE_MODE)
+			host_id = port->nqvecs;
+		else if (queue_mode == MVPP2_QDIST_MULTI_MODE)
+			host_id = q;
+		else
+			host_id = 0;
+
+		/* Set RXQ host ID */
+		val |= (host_id << (MSS_RXQ_ASS_Q_BASE(q, fq)
+			+ MSS_RXQ_ASS_HOSTID_OFFS));
+
+		mvpp2_cm3_write(port->priv, MSS_RXQ_ASS_REG(q, fq), val);
+	}
+
+	/* Notify Firmware that Flow control config space ready for update */
+	val = mvpp2_cm3_read(port->priv, MSS_FC_COM_REG);
+	val |= FLOW_CONTROL_UPDATE_COMMAND_BIT;
+	val |= cm3_state;
+	mvpp2_cm3_write(port->priv, MSS_FC_COM_REG, val);
+
+	spin_unlock_irqrestore(&port->priv->mss_spinlock, flags);
+}
+
+/* Routine disable flow control for RXQs condition */
+static void mvpp2_rxq_disable_fc(struct mvpp2_port *port)
+{
+	int val, cm3_state, q;
+	unsigned long flags;
+	int fq = port->first_rxq;
+
+	spin_lock_irqsave(&port->priv->mss_spinlock, flags);
+
+	/* Remove Flow control enable bit to prevent race between FW and Kernel
+	 * If Flow control was enabled, it would be re-enabled.
+	 */
+	val = mvpp2_cm3_read(port->priv, MSS_FC_COM_REG);
+	cm3_state = (val & FLOW_CONTROL_ENABLE_BIT);
+	val &= ~FLOW_CONTROL_ENABLE_BIT;
+	mvpp2_cm3_write(port->priv, MSS_FC_COM_REG, val);
+
+	/* Disable Flow control for all RXQs */
+	for (q = 0; q < port->nrxqs; q++) {
+		/* Set threshold 0 to disable Flow control */
+		val = 0;
+		val |= (0 << MSS_RXQ_TRESH_STOP_OFFS);
+		mvpp2_cm3_write(port->priv, MSS_RXQ_TRESH_REG(q, fq), val);
+
+		val = mvpp2_cm3_read(port->priv, MSS_RXQ_ASS_REG(q, fq));
+
+		val &= ~(MSS_RXQ_ASS_PORTID_MASK << MSS_RXQ_ASS_Q_BASE(q, fq));
+
+		val &= ~(MSS_RXQ_ASS_HOSTID_MASK << (MSS_RXQ_ASS_Q_BASE(q, fq)
+			+ MSS_RXQ_ASS_HOSTID_OFFS));
+
+		mvpp2_cm3_write(port->priv, MSS_RXQ_ASS_REG(q, fq), val);
+	}
+
+	/* Notify Firmware that Flow control config space ready for update */
+	val = mvpp2_cm3_read(port->priv, MSS_FC_COM_REG);
+	val |= FLOW_CONTROL_UPDATE_COMMAND_BIT;
+	val |= cm3_state;
+	mvpp2_cm3_write(port->priv, MSS_FC_COM_REG, val);
+
+	spin_unlock_irqrestore(&port->priv->mss_spinlock, flags);
+}
+
 /* Release buffer to BM */
 static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool,
 				     dma_addr_t buf_dma_addr,
@@ -3006,6 +3110,9 @@ static void mvpp2_cleanup_rxqs(struct mvpp2_port *port)
 
 	for (queue = 0; queue < port->nrxqs; queue++)
 		mvpp2_rxq_deinit(port, port->rxqs[queue]);
+
+	if (port->tx_fc)
+		mvpp2_rxq_disable_fc(port);
 }
 
 /* Init all Rx queues for port */
@@ -3018,6 +3125,10 @@ static int mvpp2_setup_rxqs(struct mvpp2_port *port)
 		if (err)
 			goto err_cleanup;
 	}
+
+	if (port->tx_fc)
+		mvpp2_rxq_enable_fc(port);
+
 	return 0;
 
 err_cleanup:
@@ -4317,6 +4428,8 @@ static int mvpp2_check_ringparam_valid(struct net_device *dev,
 
 	if (ring->rx_pending > MVPP2_MAX_RXD_MAX)
 		new_rx_pending = MVPP2_MAX_RXD_MAX;
+	else if (ring->rx_pending < MSS_THRESHOLD_START)
+		new_rx_pending = MSS_THRESHOLD_START;
 	else if (!IS_ALIGNED(ring->rx_pending, 16))
 		new_rx_pending = ALIGN(ring->rx_pending, 16);
 
@@ -7170,6 +7283,9 @@ static int mvpp2_probe(struct platform_device *pdev)
 			priv->hw_version = MVPP23;
 	}
 
+	/* Init mss lock */
+	spin_lock_init(&priv->mss_spinlock);
+
 	/* Initialize network controller */
 	err = mvpp2_init(pdev, priv);
 	if (err < 0) {
-- 
1.9.1