Received: by 2002:a05:6a10:8c0a:0:0:0:0 with SMTP id go10csp4018675pxb; Mon, 8 Feb 2021 06:09:37 -0800 (PST) X-Google-Smtp-Source: ABdhPJyRMk1R8AJ9t7m7ET7O/DEgflqw7gKQGJDVzzpt09o8TRFTeVLaZQ1Y30L4XBorl9bRm5yT X-Received: by 2002:a05:6402:323:: with SMTP id q3mr17377782edw.115.1612793377545; Mon, 08 Feb 2021 06:09:37 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1612793377; cv=none; d=google.com; s=arc-20160816; b=sqtb5ZsNZV/+Qf2r0gzJvrhqqPmaEITwGR3FqA5xTXof+HIHXuPbPNN45SSJdOZRbG 7iYrk1+rEe4MNsE7O9oPvDftj1kQPMyJ8lcnHNrm6Nbh8hzjnSJC4YrdOf10vVMStt2o p1SNgeANk+aCcDWLdiH8WKmEeHM+IMmBjRylLHybA9MI928Be3g7ZR/IQK5bg7qYbL6q 0jM28Gmg09PE/CQkGQXAZ6vt9AWwryi0gu0AcHBJHXRS777JuNN+KryLXLURyfwmwvbd UbNe6S2G3rs//YvrmP5tnV5viJjunUINU36Y0MPdgsJztrKJVRhWigGXSuAl8fhngWwR aabw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from; bh=aT34zdNrb5A3rF4lMjKjztboz5YdBtJDaeXge6DUOIo=; b=0Lps1pgsFNXf2JEqMM0LxXP+JPJ3nlmQsEKXzm1Y9HWK+djC3ldGhr010xXhbCxZsY h1W2EKsUHchbQSuJ8je20SNwqKV/9p0X9ymQSdkwqQYWyT+TcQN74dcj0DkQcJaOZ1ay uAm1EYhpc5W/yxsSwC9h2IVBhscLCRaDpd2AeHK6xNdlhjEMLg4eIY0gRKwz9jFN8CWj /XOKWFLuE4QME3nq64cgMUSoPVXjm41j5DAstm9TzpvepE6JlR8P3YYiUFNlMSL+1hHt JUOglwOFJL85TCLnZxSUlRcNLKKI5ogqz/tS64SiW9ZobGTlkdbJ2kaY4BV0vGOyvUco qvbA== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id eb13si13909813edb.538.2021.02.08.06.09.04; Mon, 08 Feb 2021 06:09:37 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232430AbhBHODS (ORCPT + 99 others); Mon, 8 Feb 2021 09:03:18 -0500 Received: from mail.baikalelectronics.com ([87.245.175.226]:56802 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231579AbhBHN5C (ORCPT ); Mon, 8 Feb 2021 08:57:02 -0500 From: Serge Semin To: Rob Herring , Giuseppe Cavallaro , Alexandre Torgue , Jose Abreu , "David S. Miller" , Jakub Kicinski , Johan Hovold , Maxime Ripard , Joao Pinto , Lars Persson CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Vyacheslav Mitrofanov , Maxime Coquelin , , , , , Subject: [PATCH v2 04/24] dt-bindings: net: dwmac: Refactor snps,*-config properties Date: Mon, 8 Feb 2021 16:55:48 +0300 Message-ID: <20210208135609.7685-5-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20210208135609.7685-1-Sergey.Semin@baikalelectronics.ru> References: <20210208135609.7685-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Content-Type: text/plain; charset=US-ASCII X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Currently the "snps,axi-config", "snps,mtl-rx-config" and "snps,mtl-tx-config" properties are declared as a single phandle reference to a node with corresponding parameters defined. That's not good for several reasons. First of all scattering around a device tree some particular device-specific configs with no visual relation to that device isn't suitable from maintainability point of view. That leads to a disturbed representation of the actual device tree mixing actual device nodes and some vendor-specific configs. Secondly using the same configs set for several device nodes doesn't represent well the devices structure, since the interfaces these configs describe in hardware belong to different devices and may actually differ. In the later case having the configs node separated from the corresponding device nodes gets to be even unjustified. So instead of having a separate DW *MAC configs nodes we suggest to define them as sub-nodes of the device nodes, which interfaces they actually describe. By doing so we'll make the DW *MAC nodes visually correct describing all the aspects of the IP-core configuration. Thus we'll be able to describe the configs sub-nodes bindings right in the snps,dwmac.yaml file. Note the former "snps,axi-config", "snps,mtl-rx-config" and "snps,mtl-tx-config" properties have been marked as deprecated in favor of the added by this commit "axi-config", "mtl-rx-config" and "mtl-tx-config" sub-nodes respectively. Signed-off-by: Serge Semin --- Note this change will work only if DT-schema tool is fixed like this: --- a/meta-schemas/nodes.yaml 2021-02-08 14:20:56.732447780 +0300 +++ b/meta-schemas/nodes.yaml 2021-02-08 14:21:00.736492245 +0300 @@ -22,6 +22,7 @@ - unevaluatedProperties - deprecated - required + - not - allOf - anyOf - oneOf So a property with name "not" would be allowed and the "not-required" pattern would work. Changelog v2: - Add the new sub-nodes "axi-config", "mtl-rx-config" and "mtl-tx-config" describing the nodes now deprecated properties were supposed to refer to. - Fix invalid identation in the "snps,route-*" property settings. - Use correct syntax of the JSON pointers, so the later would begin with a '/' after the '#'. --- .../devicetree/bindings/net/snps,dwmac.yaml | 389 +++++++++++++----- 1 file changed, 297 insertions(+), 92 deletions(-) diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 03d58bf9965f..4dda9ffa822c 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -150,73 +150,264 @@ properties: in a different mode than the PHY in order to function. snps,axi-config: + deprecated: true $ref: /schemas/types.yaml#/definitions/phandle description: - AXI BUS Mode parameters. Phandle to a node that can contain the - following properties - * snps,lpi_en, enable Low Power Interface - * snps,xit_frm, unlock on WoL - * snps,wr_osr_lmt, max write outstanding req. limit - * snps,rd_osr_lmt, max read outstanding req. limit - * snps,kbbe, do not cross 1KiB boundary. - * snps,blen, this is a vector of supported burst length. - * snps,fb, fixed-burst - * snps,mb, mixed-burst - * snps,rb, rebuild INCRx Burst + AXI BUS Mode parameters. Phandle to a node that contains the properties + described in the 'axi-config' sub-node. + + axi-config: + type: object + description: AXI BUS Mode parameters + + properties: + snps,lpi_en: + $ref: /schemas/types.yaml#/definitions/flag + description: Enable Low Power Interface + + snps,xit_frm: + $ref: /schemas/types.yaml#/definitions/flag + description: Unlock on WoL + + snps,wr_osr_lmt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Max write outstanding req. limit + default: 1 + minimum: 0 + maximum: 15 + + snps,rd_osr_lmt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Max read outstanding req. limit + default: 1 + minimum: 0 + maximum: 15 + + snps,kbbe: + $ref: /schemas/types.yaml#/definitions/flag + description: Do not cross 1KiB boundary + + snps,blen: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: A vector of supported burst lengths + minItems: 7 + maxItems: 7 + items: + enum: [256, 128, 64, 32, 16, 8, 4, 0] + + snps,fb: + $ref: /schemas/types.yaml#/definitions/flag + description: Fixed-burst + + snps,mb: + $ref: /schemas/types.yaml#/definitions/flag + description: Mixed-burst + + snps,rb: + $ref: /schemas/types.yaml#/definitions/flag + description: Rebuild INCRx Burst + + additionalProperties: false snps,mtl-rx-config: + deprecated: true $ref: /schemas/types.yaml#/definitions/phandle description: - Multiple RX Queues parameters. Phandle to a node that can - contain the following properties - * snps,rx-queues-to-use, number of RX queues to be used in the - driver - * Choose one of these RX scheduling algorithms - * snps,rx-sched-sp, Strict priority - * snps,rx-sched-wsp, Weighted Strict priority - * For each RX queue - * Choose one of these modes - * snps,dcb-algorithm, Queue to be enabled as DCB - * snps,avb-algorithm, Queue to be enabled as AVB - * snps,map-to-dma-channel, Channel to map - * Specifiy specific packet routing - * snps,route-avcp, AV Untagged Control packets - * snps,route-ptp, PTP Packets - * snps,route-dcbcp, DCB Control Packets - * snps,route-up, Untagged Packets - * snps,route-multi-broad, Multicast & Broadcast Packets - * snps,priority, bitmask of the tagged frames priorities assigned to - the queue + Multiple RX Queues parameters. Phandle to a node that contains the + properties described in the 'mtl-rx-config' sub-node. + + mtl-rx-config: + type: object + description: Multiple RX Queues parameters + + properties: + snps,rx-queues-to-use: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of RX queues to be used in the driver + default: 1 + minimum: 1 + + patternProperties: + "^snps,rx-sched-(sp|wsp)$": + $ref: /schemas/types.yaml#/definitions/flag + description: Strict/Weighted Strict RX scheduling priority + + "^queue[0-9]$": + type: object + description: Each RX Queue parameters + + properties: + snps,map-to-dma-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: DMA channel to map + + snps,priority: + $ref: /schemas/types.yaml#/definitions/uint32 + description: RX queue priority + minimum: 0 + maximum: 15 + + patternProperties: + "^snps,(dcb|avb)-algorithm$": + $ref: /schemas/types.yaml#/definitions/flag + description: Enable Queue as DCB/AVB + + "^snps,route-(avcp|ptp|dcbcp|up|multi-broad)$": + $ref: /schemas/types.yaml#/definitions/flag + description: + AV Untagged/PTP/DCB Control/Untagged/Multicast & Broadcast + packets routing respectively. + + additionalProperties: false + + # Choose only one of the Queue modes and the packets routing + allOf: + - not: + required: + - snps,dcb-algorithm + - snps,avb-algorithm + - oneOf: + - required: + - snps,route-avcp + - required: + - snps,route-ptp + - required: + - snps,route-dcbcp + - required: + - snps,route-up + - required: + - snps,route-multi-broad + - not: + anyOf: + - required: + - snps,route-avcp + - required: + - snps,route-ptp + - required: + - snps,route-dcbcp + - required: + - snps,route-up + - required: + - snps,route-multi-broad + + additionalProperties: false + + # Choose one of the RX scheduling algorithms + not: + required: + - snps,rx-sched-sp + - snps,rx-sched-wsp snps,mtl-tx-config: + deprecated: true $ref: /schemas/types.yaml#/definitions/phandle description: - Multiple TX Queues parameters. Phandle to a node that can - contain the following properties - * snps,tx-queues-to-use, number of TX queues to be used in the - driver - * Choose one of these TX scheduling algorithms - * snps,tx-sched-wrr, Weighted Round Robin - * snps,tx-sched-wfq, Weighted Fair Queuing - * snps,tx-sched-dwrr, Deficit Weighted Round Robin - * snps,tx-sched-sp, Strict priority - * For each TX queue - * snps,weight, TX queue weight (if using a DCB weight - algorithm) - * Choose one of these modes - * snps,dcb-algorithm, TX queue will be working in DCB - * snps,avb-algorithm, TX queue will be working in AVB - [Attention] Queue 0 is reserved for legacy traffic - and so no AVB is available in this queue. - * Configure Credit Base Shaper (if AVB Mode selected) - * snps,send_slope, enable Low Power Interface - * snps,idle_slope, unlock on WoL - * snps,high_credit, max write outstanding req. limit - * snps,low_credit, max read outstanding req. limit - * snps,priority, bitmask of the priorities assigned to the queue. - When a PFC frame is received with priorities matching the bitmask, - the queue is blocked from transmitting for the pause time specified - in the PFC frame. + Multiple TX Queues parameters. Phandle to a node that contains the + properties described in the 'mtl-tx-config' sub-node. + + mtl-tx-config: + type: object + description: Multiple TX Queues parameters + + properties: + snps,tx-queues-to-use: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of TX queues to be used in the driver + default: 1 + minimum: 1 + + patternProperties: + "^snps,tx-sched-(wrr|wfq|dwrr|sp)$": + $ref: /schemas/types.yaml#/definitions/flag + description: + Weighted Round Robin, Weighted Fair Queuing, + Deficit Weighted Round Robin or Strict TX scheduling priority. + + "^queue[0-9]$": + type: object + description: Each TX Queue parameters + + properties: + snps,priority: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TX queue priority + minimum: 0 + maximum: 15 + + snps,weight: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TX queue weight (if using a DCB weight algorithm) + minimum: 0 + maximum: 0x1FFFFF + + snps,send_slope: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Enable Low Power Interface + minimum: 0 + maximum: 0x3FFF + + snps,idle_slope: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Unlock on WoL + minimum: 0 + maximum: 0x1FFFFF + + snps,high_credit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Max write outstanding req. limit + minimum: 0 + maximum: 0x1FFFFFFF + + snps,low_credit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Max read outstanding req. limit + minimum: 0 + maximum: 0x1FFFFFFF + + patternProperties: + "^snps,(dcb|avb)-algorithm$": + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable Queue as DCB/AVB. Note Queue 0 is reserved for legacy + traffic and so no AVB is available in this queue. + + additionalProperties: false + + # Choose only one of the Queue modes + not: + required: + - snps,dcb-algorithm + - snps,avb-algorithm + + # Credit Base Shaper is configurable for AVB Mode only + dependencies: + snps,send_slope: ["snps,avb-algorithm"] + snps,idle_slope: ["snps,avb-algorithm"] + snps,high_credit: ["snps,avb-algorithm"] + snps,low_credit: ["snps,avb-algorithm"] + + additionalProperties: false + + # Choose one of the TX scheduling algorithms + oneOf: + - required: + - snps,tx-sched-wrr + - required: + - snps,tx-sched-wfq + - required: + - snps,tx-sched-dwrr + - required: + - snps,tx-sched-sp + - not: + anyOf: + - required: + - snps,tx-sched-wrr + - required: + - snps,tx-sched-wfq + - required: + - snps,tx-sched-dwrr + - required: + - snps,tx-sched-sp snps,reset-gpio: deprecated: true @@ -345,41 +536,6 @@ additionalProperties: true examples: - | - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <0xf>; - snps,rd_osr_lmt = <0xf>; - snps,blen = <256 128 64 32 0 0 0>; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,priority = <0x0>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <2>; - snps,tx-sched-wrr; - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - - queue1 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3E800>; - snps,low_credit = <0xFFC18000>; - snps,priority = <0x1>; - }; - }; - gmac0: ethernet@e0800000 { compatible = "snps,dwxgmac-2.10", "snps,dwxgmac"; reg = <0xe0800000 0x8000>; @@ -407,6 +563,55 @@ examples: }; }; }; + - | + gmac1: ethernet@f8010000 { + compatible = "snps,dwmac-4.10a", "snps,dwmac"; + reg = <0xf8010000 0x4000>; + interrupts = <0 98 4>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "ptp_ref"; + clocks = <&clock 4>, <&clock 5>; + phy-mode = "rgmii"; + snps,txpbl = <8>; + snps,rxpbl = <2>; + snps,aal; + snps,tso; + + axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <256 128 64 32 0 0 0>; + }; + + mtl-rx-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + }; + + mtl-tx-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + + queue1 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3E800>; + snps,low_credit = <0xFFC18000>; + snps,priority = <0x1>; + }; + }; + }; # FIXME: We should set it, but it would report all the generic # properties as additional properties. -- 2.29.2