Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751291AbWIWQpB (ORCPT ); Sat, 23 Sep 2006 12:45:01 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751292AbWIWQpB (ORCPT ); Sat, 23 Sep 2006 12:45:01 -0400 Received: from relais.videotron.ca ([24.201.245.36]:55036 "EHLO relais.videotron.ca") by vger.kernel.org with ESMTP id S1751291AbWIWQo7 (ORCPT ); Sat, 23 Sep 2006 12:44:59 -0400 Date: Sat, 23 Sep 2006 12:44:58 -0400 From: Vincent Gentilcore Subject: dmesg To: linux-kernel@vger.kernel.org Message-id: <4515648A.5080807@videotron.ca> MIME-version: 1.0 Content-type: multipart/mixed; boundary="Boundary_(ID_1pgWKmiJmJxtuPFZMPK6Eg)" User-Agent: Thunderbird 1.5.0.7 (X11/20060918) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23552 Lines: 390 This is a multi-part message in MIME format. --Boundary_(ID_1pgWKmiJmJxtuPFZMPK6Eg) Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7BIT dmesg Vincent Gentilcore --Boundary_(ID_1pgWKmiJmJxtuPFZMPK6Eg) Content-type: text/plain; CHARSET=US-ASCII; name=dmesg Content-transfer-encoding: 7BIT Content-disposition: inline; filename=dmesg [ 0.000000] Linux version 2.6.18.230906 (root@vinnyduke-desktop) (gcc version 4.1.2 20060920 (prerelease) (Ubuntu 4.1.1-13ubuntu3)) #2 SMP Sat Sep 23 10:15:55 EDT 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff40000 (usable) [ 0.000000] BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] On node 0 totalpages: 261952 [ 0.000000] DMA zone: 4096 pages, LIFO batch:0 [ 0.000000] Normal zone: 225280 pages, LIFO batch:31 [ 0.000000] HighMem zone: 32576 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fa580 [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000612 MSFT 0x00000097) @ 0x3ff40000 [ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x07000612 MSFT 0x00000097) @ 0x3ff40200 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000612 MSFT 0x00000097) @ 0x3ff40300 [ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x07000612 MSFT 0x00000097) @ 0x3ff50040 [ 0.000000] ACPI: DSDT (v001 75i6G 75i6G242 0x00000242 INTL 0x02002026) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:6 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:6 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bed00000) [ 0.000000] Detected 2999.918 MHz processor. [ 17.449606] Built 1 zonelists. Total pages: 261952 [ 17.449610] Kernel command line: root=/dev/hda1 ro quiet locale=fr [ 17.449785] mapped APIC to ffffd000 (fee00000) [ 17.449787] mapped IOAPIC to ffffc000 (fec00000) [ 17.449790] Enabling fast FPU save and restore... done. [ 17.449793] Enabling unmasked SIMD FPU exception support... done. [ 17.449796] Initializing CPU#0 [ 17.449858] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 17.453990] Console: colour VGA+ 80x25 [ 17.454320] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 17.454655] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 17.474644] Memory: 1027260k/1047808k available (2141k kernel code, 19856k reserved, 1358k data, 308k init, 130304k highmem) [ 17.474648] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 17.533758] Calibrating delay using timer specific routine.. 6001.60 BogoMIPS (lpj=3000803) [ 17.533792] Security Framework v1.0.0 initialized [ 17.533796] SELinux: Disabled at boot. [ 17.533810] Mount-cache hash table entries: 512 [ 17.533921] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001 [ 17.533931] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001 [ 17.533937] monitor/mwait feature present. [ 17.533939] using mwait in idle threads. [ 17.533946] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 17.533948] CPU: L2 cache: 2048K [ 17.533951] CPU: Physical Processor ID: 0 [ 17.533952] CPU: Processor Core ID: 0 [ 17.533954] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000e43d 00000000 00000001 [ 17.533963] Compat vDSO mapped to ffffe000. [ 17.533976] Checking 'hlt' instruction... OK. [ 17.537824] SMP alternatives: switching to UP code [ 17.537944] ACPI: Core revision 20060707 [ 17.540082] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 [ 17.540090] SMP alternatives: switching to SMP code [ 17.540118] Booting processor 1/1 eip 3000 [ 18.267557] Initializing CPU#1 [ 18.327549] Calibrating delay using timer specific routine.. 5998.54 BogoMIPS (lpj=2999271) [ 18.327558] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001 [ 18.327565] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001 [ 18.327570] monitor/mwait feature present. [ 18.327576] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 18.327578] CPU: L2 cache: 2048K [ 18.327580] CPU: Physical Processor ID: 0 [ 18.327582] CPU: Processor Core ID: 1 [ 18.327583] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000e43d 00000000 00000001 [ 17.611122] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 [ 17.611155] Total of 2 processors activated (12000.14 BogoMIPS). [ 17.611280] ENABLING IO-APIC IRQs [ 17.611435] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 17.722534] checking TSC synchronization across 2 CPUs: [ 0.000002] CPU#0 had -358913 usecs TSC skew, fixed it up. [ 0.000005] CPU#1 had 358913 usecs TSC skew, fixed it up. [ 0.000997] Brought up 2 CPUs [ 0.131938] migration_cost=1163 [ 0.132069] checking if image is initramfs... it is [ 0.669101] Freeing initrd memory: 6531k freed [ 0.669426] NET: Registered protocol family 16 [ 0.669511] EISA bus registered [ 0.669516] ACPI: bus type pci registered [ 0.669595] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.669601] PCI: Using configuration type 1 [ 0.669603] Setting up standard PCI resources [ 0.682539] ACPI: Interpreter enabled [ 0.682542] ACPI: Using IOAPIC for interrupt routing [ 0.682998] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.683003] PCI: Probing PCI hardware (bus 00) [ 0.686115] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.686119] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 0.686174] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 0.686413] Boot video device is 0000:01:00.0 [ 0.686588] PCI: Transparent bridge - 0000:00:1e.0 [ 0.686614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.688505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.693094] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.693341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.693577] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.693815] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.694050] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.694295] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.694531] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.694768] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.694908] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.694918] pnp: PnP ACPI init [ 0.698108] pnp: PnP ACPI: found 11 devices [ 0.698116] PnPBIOS: Disabled by ACPI PNP [ 0.698193] usbcore: registered new driver usbfs [ 0.698229] usbcore: registered new driver hub [ 0.698303] PCI: Using ACPI for IRQ routing [ 0.698306] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.702914] pnp: 00:09: ioport range 0x290-0x29f has been reserved [ 0.703193] PCI: Bridge: 0000:00:01.0 [ 0.703195] IO window: disabled. [ 0.703200] MEM window: fa900000-fe9fffff [ 0.703204] PREFETCH window: bff00000-dfefffff [ 0.703208] PCI: Bridge: 0000:00:1e.0 [ 0.703211] IO window: b000-bfff [ 0.703217] MEM window: fea00000-feafffff [ 0.703220] PREFETCH window: disabled. [ 0.703236] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.703264] NET: Registered protocol family 2 [ 0.714175] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.714313] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.714938] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.715257] TCP: Hash tables configured (established 131072 bind 65536) [ 0.715260] TCP reno registered [ 0.716526] audit: initializing netlink socket (disabled) [ 0.716540] audit(1159014889.184:1): initialized [ 0.716649] highmem bounce pool size: 64 pages [ 0.716740] VFS: Disk quotas dquot_6.5.1 [ 0.716761] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.716831] Initializing Cryptographic API [ 0.716835] io scheduler noop registered [ 0.716846] io scheduler anticipatory registered [ 0.716853] io scheduler deadline registered [ 0.716870] io scheduler cfq registered (default) [ 0.717055] isapnp: Scanning for PnP cards... [ 1.071122] isapnp: No Plug & Play device found [ 1.095531] Real Time Clock Driver v1.12ac [ 1.095581] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.096727] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.096860] 8139too Fast Ethernet driver 0.9.27 [ 1.096880] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 169 [ 1.097172] eth0: RealTek RTL8139 at 0xf8804c00, 00:13:8f:9d:c2:2f, IRQ 169 [ 1.097175] eth0: Identified 8139 chip type 'RTL-8101' [ 1.097182] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.097186] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.097209] ICH5: IDE controller at PCI slot 0000:00:1f.1 [ 1.097215] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 [ 1.097222] ICH5: chipset revision 2 [ 1.097224] ICH5: not 100% native mode: will probe irqs later [ 1.097234] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [ 1.097247] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 1.097256] Probing IDE interface ide0... [ 1.360475] hda: Maxtor 6Y120L0, ATA DISK drive [ 1.971764] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.971815] Probing IDE interface ide1... [ 2.642913] hdc: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive [ 3.356044] hdd: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive [ 3.419088] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.419383] hda: max request size: 512KiB [ 3.424818] hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [ 3.424966] hda: cache flushes supported [ 3.425004] hda: hda1 hda2 [ 3.434529] hdc: ATAPI 79X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 3.434537] Uniform CD-ROM driver Revision: 3.20 [ 3.451760] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) [ 3.460455] usbmon: debugfs is not available [ 3.460513] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185 [ 3.460530] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.460535] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.460589] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.460623] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.460629] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 3.460639] ehci_hcd 0000:00:1d.7: irq 185, io mem 0xfebffc00 [ 3.464532] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.464650] usb usb1: configuration #1 chosen from 1 choice [ 3.464696] hub 1-0:1.0: USB hub found [ 3.464704] hub 1-0:1.0: 8 ports detected [ 3.565743] USB Universal Host Controller Interface driver v3.0 [ 3.565799] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193 [ 3.565809] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.565812] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.565849] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.565871] uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000e000 [ 3.565994] usb usb2: configuration #1 chosen from 1 choice [ 3.566033] hub 2-0:1.0: USB hub found [ 3.566041] hub 2-0:1.0: 2 ports detected [ 3.666619] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 [ 3.666627] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.666630] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.666667] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.666691] uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000e400 [ 3.666809] usb usb3: configuration #1 chosen from 1 choice [ 3.666849] hub 3-0:1.0: USB hub found [ 3.666855] hub 3-0:1.0: 2 ports detected [ 3.767495] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 [ 3.767503] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.767507] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.767543] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.767565] uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000e800 [ 3.767690] usb usb4: configuration #1 chosen from 1 choice [ 3.767730] hub 4-0:1.0: USB hub found [ 3.767737] hub 4-0:1.0: 2 ports detected [ 3.868369] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193 [ 3.868376] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.868380] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.868417] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.868436] uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000ec00 [ 3.868558] usb usb5: configuration #1 chosen from 1 choice [ 3.868597] hub 5-0:1.0: USB hub found [ 3.868604] hub 5-0:1.0: 2 ports detected [ 4.081026] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 4.244080] usb 3-1: configuration #1 chosen from 1 choice [ 4.452573] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 4.604627] usb 3-2: configuration #1 chosen from 1 choice [ 4.607711] usbcore: registered new driver libusual [ 4.607789] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 4.607793] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 4.609675] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.609887] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.610007] mice: PS/2 mouse device common for all mice [ 4.610495] EISA: Probing bus 0 at eisa.0 [ 4.610537] EISA: Detected 0 cards. [ 4.610560] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). [ 4.610640] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209 [ 4.610664] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 4.883549] input: AT Translated Set 2 keyboard as /class/input/input0 [ 4.920004] intel8x0_measure_ac97_clock: measured 50993 usecs [ 4.920006] intel8x0: clocking to 48000 [ 4.920278] ALSA device list: [ 4.920281] #0: Intel ICH5 with CMI9761 at 0xfebff800, irq 209 [ 4.920345] TCP bic registered [ 4.920353] NET: Registered protocol family 1 [ 4.920360] NET: Registered protocol family 8 [ 4.920362] NET: Registered protocol family 20 [ 4.920396] Starting balanced_irq [ 4.920402] Using IPI No-Shortcut mode [ 4.920472] ACPI: (supports S0 S1 S3 S4 S5) [ 4.920698] Freeing unused kernel memory: 308k freed [ 4.920864] Time: tsc clocksource has been installed. [ 4.984997] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node c18e589c), AE_BAD_HEADER [ 4.985058] ACPI: Processor [CPU1] (supports 8 throttling states) [ 4.985123] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node c18e57fc), AE_BAD_HEADER [ 4.985154] ACPI: Processor [CPU2] (supports 8 throttling states) [ 4.985162] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] [ 4.985167] ACPI: Getting cpuindex for acpiid 0x3 [ 4.985230] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] [ 4.985234] ACPI: Getting cpuindex for acpiid 0x4 [ 5.292911] usbcore: registered new driver hiddev [ 5.313324] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 [ 5.313451] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1 [ 5.313465] usbcore: registered new driver usbhid [ 5.313469] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 5.467733] SCSI subsystem initialized [ 5.472161] libata version 2.00 loaded. [ 5.474210] ata_piix 0000:00:1f.2: version 2.00 [ 5.474215] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 5.474232] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177 [ 5.474244] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.474501] ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC400 irq 177 [ 5.474533] ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xC408 irq 177 [ 5.474541] scsi0 : ata_piix [ 5.625854] ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 [ 5.625858] ata1.00: ata1: dev 0 multi count 16 [ 5.626626] ata1.00: configured for UDMA/133 [ 5.626634] scsi1 : ata_piix [ 5.787151] ATA: abnormal status 0x7F on port 0xCC07 [ 5.787244] Vendor: ATA Model: WDC WD2500KS-00M Rev: 02.0 [ 5.787259] Type: Direct-Access ANSI SCSI revision: 05 [ 5.792555] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 5.792569] sda: Write Protect is off [ 5.792572] sda: Mode Sense: 00 3a 00 00 [ 5.792590] SCSI device sda: drive cache: write back [ 5.792639] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 5.792650] sda: Write Protect is off [ 5.792653] sda: Mode Sense: 00 3a 00 00 [ 5.792670] SCSI device sda: drive cache: write back [ 5.792672] sda: sda1 sda2 sda3 < sda5 > [ 5.822730] sd 0:0:0:0: Attached scsi disk sda [ 6.066138] Attempting manual resume [ 6.079865] kjournald starting. Commit interval 5 seconds [ 6.079875] EXT3-fs: mounted filesystem with ordered data mode. [ 13.303256] hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } [ 13.303262] ide: failed opcode was: unknown [ 13.403770] hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest } [ 13.403774] ide: failed opcode was: unknown [ 13.499601] Floppy drive(s): fd0 is 1.44M [ 13.515306] FDC 0 is a post-1991 82077 [ 13.517655] input: PC Speaker as /class/input/input2 [ 13.540917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.570894] Linux agpgart interface v0.101 (c) Dave Jones [ 13.576466] hda: CHECK for good STATUS [ 13.576493] hda: CHECK for good STATUS [ 13.591592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.606916] agpgart: Detected an Intel 865 Chipset. [ 13.619975] agpgart: AGP aperture is 256M @ 0xe0000000 [ 13.633518] hda: CHECK for good STATUS [ 13.740274] hdc: CHECK for good STATUS [ 13.740596] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 13.740603] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 13.740605] ide: failed opcode was: 0xef [ 13.741517] hdc: CHECK for good STATUS [ 13.751393] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [ 13.753696] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 13.753703] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 13.753706] ide: failed opcode was: 0xef [ 13.766783] hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } [ 13.766790] hdd: set_drive_speed_status: error=0x24 { AbortedCommand LastFailedSense=0x02 } [ 13.766795] ide: failed opcode was: unknown [ 13.819989] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.842515] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 13.847136] hdc: CHECK for good STATUS [ 13.847460] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 13.847467] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 13.847469] ide: failed opcode was: 0xef [ 13.919047] hdd: CHECK for good STATUS [ 13.926870] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 13.926876] hdd: drive_cmd: error=0x04 { AbortedCommand } [ 13.926878] ide: failed opcode was: 0xef [ 13.933029] hdd: CHECK for good STATUS [ 13.933616] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 13.933621] hdd: drive_cmd: error=0x04 { AbortedCommand } [ 13.933624] ide: failed opcode was: 0xef [ 14.015928] hdd: CHECK for good STATUS [ 14.027834] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 14.027840] hdd: drive_cmd: error=0x04 { AbortedCommand } [ 14.027843] ide: failed opcode was: 0xef [ 14.064387] ts: Compaq touchscreen protocol output [ 14.092948] NET: Registered protocol family 10 [ 14.093040] lo: Disabled Privacy Extensions [ 14.093165] IPv6 over IPv4 tunneling driver [ 14.216674] nvidia: module license 'NVIDIA' taints kernel. [ 14.219257] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 [ 14.219432] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 [ 14.557270] lp: driver loaded but no devices found [ 14.568869] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 209 [ 14.682453] Adding 2546260k swap on /dev/disk/by-uuid/0fa29cb5-36a3-4637-8e6a-2567cf375865. Priority:-1 extents:1 across:2546260k [ 14.742403] EXT3 FS on hda1, internal journal [ 14.989335] kjournald starting. Commit interval 5 seconds [ 14.989628] EXT3 FS on sda2, internal journal [ 14.989633] EXT3-fs: mounted filesystem with ordered data mode. [ 14.997800] kjournald starting. Commit interval 5 seconds [ 14.997994] EXT3 FS on hda2, internal journal [ 14.997998] EXT3-fs: mounted filesystem with ordered data mode. [ 15.027052] NTFS driver 2.1.27 [Flags: R/O MODULE]. [ 15.046091] NTFS volume version 3.1. [ 16.272652] NET: Registered protocol family 17 --Boundary_(ID_1pgWKmiJmJxtuPFZMPK6Eg)-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/